Photoshop :: Way To Hide Cursor / Crosshairs While Drawing?
Jan 16, 2012
In CS5, is there a way to hide the cursor/ crosshairs while drawing? Since I'm working on a Cintiq I don't need visual reference of where my cursor is - it's where my pen is - and it actually annoys me to have this crosshair cursor in the way of what I'm doing. Ofcourse it's no problem to have a cursor for selecting tools or menus - it's only while drawing that it would be preferable to have a clean working area under the pentip.
View 5 Replies
ADVERTISEMENT
Jul 18, 2009
Recently my cursurs have turned to crosshairs. I have deleted my preferences, I have set cursurs to full size brush tip, yet when I use the crop or marquis tool. all I get is the crosshars.
View 2 Replies
View Related
Jan 24, 2006
One of my co-worker has this problem with his cursor's crosshairs. When he moves his cursor the crosshairs are like blinking or sort of flashing. It's not that big of a problem but it's just getting anoying in a short while.
View 9 Replies
View Related
Mar 6, 2013
Moments ago my crosshairs in the model space decided to rotate. I tried to undo, but apparently the damage is done.
I came across a thread on another website about trying UCS, world & plan etc which I tried.
While this did rotate my crosshairs to be straight and normal again, it rotated all of my drawings I have numerous sections on the page and unfortunately they all became rotated.
Is there a way to rotate the crosshairs and not change my drawing?
View 4 Replies
View Related
Mar 4, 2011
When I insert a X-ref overlay, everything seems to work, but giant cross hairs with a circles appear dotted all around on the X-refed drawing, similar to spot levels (minus the hatch).
Attached an image X-ref image.jpg
How to stop this or why it seems to be scaling up the crosshairs .
View 8 Replies
View Related
Sep 20, 2012
I have a panel with holes,cutouts and silkscreen
In the drawing the panel is detailed to show hole locations and sizes on one sheet and in another view @ 1:1 the silkscreen is shown.
The silkscreen is a feature on the panel, text either embossed or extruded .005" outward. The feature is colored (filled).
On my drawing all the silk screens show up like un-filled fonts. This really bothers some people and my task is to fill the fonts.
Also i need to get the silkscreen by itself and (suppress/invisible) remove the other features from the view.
Suppress will not work as the feature i am trying to show will also be suppressed. Visibility of features is not an option.
Q. HOW CAN I GET THE FEATURE SEGREGATED AND SOLID IN MY DRAWING? but still a feature of the part. i.e. i don't want to create an assembly with a panel and a silkscreen.
How do i suppress features in a view on the drawing?
View 5 Replies
View Related
Mar 12, 2013
Is there some way in an Inventor idw drawing to 'hide' a page. I have created an extra page with information for future changes but do not want it to printed or be counted in the total number of sheets.
View 1 Replies
View Related
Jun 20, 2013
In InDesign I can press W to show or hide everything around the page I am working on. In Illustrator I can't find a similar option. I am working on something and a lot of things are outside of the actual drawing area. The problem is that I see everything all the time and so I never get a good impression of how the illustration will look when finished/printed! I now have to export a jpg in order to get a good impression! Or I have to add a layer on top of everything and place white blocks around the actual drawing area in order to get a good impression of the actual artwork.
View 10 Replies
View Related
Dec 19, 2011
I have created a cable/harness in my assembly. I have to edit the cable to change visability to centerline display in order to turn off visibility in a drawing view. The issue is that on one sheet of my drawing I need to show the cable, but not on the others. As soon as I turn the rendered display on, the cable shows up on all sheets and the visiblity command has no affect. Is there a hotfix for this? I don't remember a problem like this in 2011.
View 2 Replies
View Related
Mar 31, 2012
I am not sure why, but i can't hide few parts in my drawing. I have hidden few parts and saved the view rep. I have called that particular view rep and still I am seeing it the drawing. I am unable to hide it. This is a multi body solid part file. I use INV2012. Win 7
View 1 Replies
View Related
Sep 28, 2012
I was giving a hand drawn wiring diagram (original.jpg) and it is a rats nest!!
I was asked to re-draw this and put it on our drawing template.
I have the plugs and terminal blocks drawn up and now I am about to attempt to add in the wires, but the sketch is so filled with dimension lines and values, it is going to be a task to try and make sure every line I draw is correct. This would be much easier to do if the dimensions could be turned off as the wires I am drawing will not be constrained.
I don't think there is layers options inside a sketch mode, or a if i start a new sketch I don't think I can project that sketch to the new one?
The only other options I can think of was to delete all dimensions and apply FIX constraint to everything! or
I guess I could have modeled the plugs and blocks in position and added them to the drawing, projected the geometry to a new sketch and added in my wires??
There must be someway to toggle the dimensions??
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 9 Replies
View Related
Nov 19, 2011
While drawing with a tool, normally you have:
1. the brush shape2. the mouse pointer
3. a little image representing the tool in use.
Is it possible to disable both 2 and 3?
View 2 Replies
View Related
Nov 27, 2005
I create a palette dialog. I put the Button icon on it. When I click the Button, the cursor still on the palette dialog. I want to the cursor move to dawing area(any drawing background) just after I click the Button. Is it possible?
View 2 Replies
View Related
May 3, 2012
All of a sudden my cursor will become invisible. This happens only with AutoCAD. and if I switch between drawing windows it will appear on another drawing file. I have to close the drawing and open it again and then the cursor will be back only to disappear again. The cursor is visible if I move it back to the ribbon or bottom controls. It seems to happen only when it becomes the cross-hair cursor. I can still make selection windows and right click.
Mouse is working fine with all other programs and drivers are up-to-date.
View 9 Replies
View Related
Apr 5, 2011
When I go to draw a polyline, it feels like the snap mode is on and it takes forever to select my end point. It's almost as if it is lagging behind. I did not see this problem until I upgraded to 2012 last week. Going back to 2011, it seems to be doing the same thing.
View 8 Replies
View Related
May 7, 2013
I use GIMP 2.6.8 - when I switch to "path" tool or to "free select tool" mouse pointer is allowed to set vertices of the path or selection on non-integer coordinates (i.e. at x=13.5 and y=26.8 pixels)
How can I disable this feature and make mouse pointer (or vertex) snap to pixel boundary (or even to grid). I want it to be able to create paths / selections more accurately sometimes.
(or could I at least enter coordinates for each next vertex manually)
View 1 Replies
View Related
Dec 23, 2013
I had Corel Photo Paint v.9, have used it for years in addition to DRAW, but recently my computer died and I had to replace it. I installed it on the new machine, which is running Windows 7 Pro 64 bit, but the line tool suddenly started acting nuts. I would move the cursor to where I wanted to start the line and start the line with a mouse click. The line would then dart half-way down the screen and would be nowhere near the cursor's cross hairs making it difficult to work on images.
So, I figured it was a compatibility issue so I bought Corel Technical Suite X6 and have installed it. The line tool does exactly the same thing. The position of the line is nowhere near the crosshairs of the cursor. Is this a new "feature" or is this a bug? If the former, how can I get it to work like I am accustomed to working (I have used DRAW and Photopaint since the mid 1990's, using version 5.0). If the latter, how can I fix it?
View 10 Replies
View Related
Feb 27, 2013
I have a ListView control from where I drag items to Drawing area. Whenever mouse leaves the ListView Control and enters the AutoCAD drawing area, AutoCAD claims the mouse cursor back to Cross Pointer.
Is it possible to change this cursor during drag operation to a pointer with some attachment? As normally happened in Windows Explorer while dragging and dropping files among folders.
View 5 Replies
View Related
May 10, 2013
How to resolve the issue of : Displayed drawing keeps on vibrating everytime the cursor is move.
View 5 Replies
View Related
Jan 9, 2014
I'm running Autocad 2013 Civil 3d, when I open a particular drawing the cursor turns to a circular shape as if it is downloading something, but it is actually not loading anything. This circular cursor does not let you do anything with the drawing, you just have to keep hitting esc until it gives you a fatal error message that says "FATAL ERROR: Cannot write to undo file (probably disk full)" and it kicks you out of autcad. How to get rid of this ciruclar cursor?
View 6 Replies
View Related
Mar 2, 2014
On a previous computer I used Illustrator for, when I would draw or make selections, next to the cursor in a small black box with white text, there would be the dimenstions information. It was similar to what you'd find in the Window>Info panel but simplified and would let you know how big the selection you're making is. I've looked all over the Preferences and can't find it.
View 1 Replies
View Related
Nov 30, 2006
I have trouble seeing the crosshairs on my screen.
Is there anyway for me to make them larger so i don't have to strain to see them?
View 3 Replies
View Related
Nov 12, 2013
I'm using PSE 11. When I select the Crop tool, the crop symbol is a dot with cross hairs on the outside. How do I change the crop symbol to the traditional crop symbol?
View 8 Replies
View Related
Jan 14, 2013
The eraser tool will only appear as small crosshairs no matter what I try.
View 1 Replies
View Related
Dec 14, 2012
My cursor appears and disappears while in GIMP as I move the cursor over the canvas. I can make the cursor appear but only if there is no movement of the cursor. It makes no difference which tool I select, the size of the canvas, or the level of zoom.
Please note that this only occurs in Gimp, and none of my other applications. It started when I upgraded from openSUSE 12.1 to 12.2. I'm assuming that it has something to do with my input device configuration, but I could be totally wrong.
I have a total of 3 input devices - Core Pointer, Logitech USB-PS/2 Optical Mouse, and Virtual Core XTEST Pointer. Both the Optical Mouse and XTEST Pointer are DISABLED. Core Pointer is the only one enabled. Enabling Optical Mouse and XTEST Pointer give me other problems in Gimp and need to remain disabled.
For the Core Pointer, Mode is set to SCREEN, a message says that 'The axis X has no curve', and the following Axis Settings:
X 1
Y 2
Pressure none
xtilt none
ytilt none
wheel none
In Gimp Preferences->Input Controllers, there are three active controllers - Mouse Buttons, Main Mouse Wheel, and Main Keyboard.
OS: Linux 3.4.11-2.16-desktop i686
System: openSUSE 12.2 (i586)
KDE: 4.8.5 (4.8.5) "release 2"
Display Info:
Vendor: Intel Corporation
Model: G33
2D driver: intel
3D driver: Unknown Gallium (9.0.1)
View 3 Replies
View Related
Apr 6, 2011
I have work to do on a bathroom group that is rotated at 18 degrees. How do I rotate my crosshairs to make this easer to work on?
View 4 Replies
View Related
Jan 4, 2012
I was drafting away, and all of a sudden my crosshairs and pickbox disappeared. Once I move the mouse there's nothing in my drawing plane. I can type commands, and when I move the mouse up to the menu area I can pull down menus. I've opened up other drawings and the crosshairs and pick box are there.
What can I do to resolve this? Of course it happens during a deadline.
Using Autocad version 2009, windows 2007, Professional
View 6 Replies
View Related
Jul 15, 2009
I opened a multi-tab CAD document, and my crosshairs disappear when I go into a viewport from paperspace. I can still select things, but I can't see what I'm selecting because the crosshairs are gone! The viewports in the other tabs are fine, I can see my crosshairs in those. I've looked for some setting that accidentally got changed, but can't figure it out. I'm running AutoCAD 2010.
View 9 Replies
View Related
Jun 24, 2013
My crosshairs are not moving smoothly in my workspace. They are jumping big spaces. I typed "snap" and click "OFF" but it had not effect. I can't click on objects.. or draw from.. my mouse moves smoothly in every other application of my computer..just not in CAD workspace.
View 9 Replies
View Related
Nov 24, 2011
In AutoCad 2012 I have a large drawing with 30000 entities in it. Most times (althoguh not always), after saving, the crosshairs then vanish and I have to exit the drawing and open it again to get them back.
It doesn't happen in all drawing files, as far as I can tell it is just this large one.
View 0 Replies
View Related
Feb 27, 2013
I have recently been fighting an override of some sort that doesn't want to go away. As an example, for basic copy command, I would normally select my object to copy, type C, hit the space bar, and select my object again to copy to new location. With this override, I select my object, type C, hit the space bar, and in the command line, this appears:
Command: c COPY 1 found
Current Settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] : c
View 2 Replies
View Related
