I create a palette dialog. I put the Button icon on it. When I click the Button, the cursor still on the palette dialog. I want to the cursor move to dawing area(any drawing background) just after I click the Button. Is it possible?
View 2 RepliesI have a ListView control from where I drag items to Drawing area. Whenever mouse leaves the ListView Control and enters the AutoCAD drawing area, AutoCAD claims the mouse cursor back to Cross Pointer.
Is it possible to change this cursor during drag operation to a pointer with some attachment? As normally happened in Windows Explorer while dragging and dropping files among folders.
I have used the marquee tool to select an area and moved it using the cursor keys. Now I want to drop it/commit it even when I hit enter I can't seem to get rid of the marquee flashing surround.
View 4 Replies View RelatedAll of a sudden my cursor will become invisible. This happens only with AutoCAD. and if I switch between drawing windows it will appear on another drawing file. I have to close the drawing and open it again and then the cursor will be back only to disappear again. The cursor is visible if I move it back to the ribbon or bottom controls. It seems to happen only when it becomes the cross-hair cursor. I can still make selection windows and right click.
Mouse is working fine with all other programs and drivers are up-to-date.
When I go to draw a polyline, it feels like the snap mode is on and it takes forever to select my end point. It's almost as if it is lagging behind. I did not see this problem until I upgraded to 2012 last week. Going back to 2011, it seems to be doing the same thing.
View 8 Replies View RelatedHow to resolve the issue of : Displayed drawing keeps on vibrating everytime the cursor is move.
View 5 Replies View RelatedI'm running Autocad 2013 Civil 3d, when I open a particular drawing the cursor turns to a circular shape as if it is downloading something, but it is actually not loading anything. This circular cursor does not let you do anything with the drawing, you just have to keep hitting esc until it gives you a fatal error message that says "FATAL ERROR: Cannot write to undo file (probably disk full)" and it kicks you out of autcad. How to get rid of this ciruclar cursor?
View 6 Replies View RelatedI have started Brian Benton's tutorials and hit a problem on the second one, "Quick Run Thru". The problem is that the object drawn is too small on the screen to be useful. This was the result of drawing the 50x30 rectangle called for in the tutorial. My First Rectangle17-07-2013 8-15-10 AM.jpg What setting adjustment is required to show the rectangle as it appears in the tutorial - i.e. larger on the screen so I can do something with it.
View 6 Replies View RelatedI would like to be able to draw squares by the area they should have. So that if I need a square of 50m2 autocad automatically draws a square of sqrt(50) x sqrt(50) Because right now I have to draw 200 squares with 100 different areas and I have to calculate and manually draw each one of them.
View 3 Replies View RelatedToday i Get new Drawing then i tried to find out the area of certain room. Then The Room less than 10 m2 is ok but the area more than 10 m2 meter is coming like this area 1.03310963E+07. How to change this setting.
View 3 Replies View RelatedMy question is to find the dimension in the drawing area
for example
If we observe in the drawing left hand site we can see alphabets in the border area and number at top border area
if the dimension lies between "A" on left hand side and "1" on top border srea
then i want a message the dimension lies on A1
Is it possible to get the "actual" calculated area of the face of a part from a drawing view? I looked at the drawing view object in the api but didn't find what I was looking for. What my goal is, I want to calculate the actual square foot of this piece and then subtract it from the overall square foot so I can calculate waste. Perimeter's of pieces can be in multiple forms, radial, straight or a combination of the two. See image below.
View 1 Replies View RelatedPlotting to layout (as opposed to extents or window) is infuriating. I cannot get my drawing to center properly within the printable area, and I can find no consistency on how AutoCAD is offsetting my drawing. My titleblock is drawn with a trim line of 22x34". I choose the ANSI D sheet size which is 22x34" and when I preview the plot the bottom left corner is offset from the bottom left corner of the printable area by .25, .25.
If I delete the 22x34 trim line from my titbleblock and replace it with a simple point at the 0, 0 bottom left corner, then when I check the layout and printable area, the point shows up offset from the bottom left corner of the printable area by .0006, .0016. Why is it any different than when a line was drawn? If I delete the point the offset from the bottom left corner of the printable area to the closest drawn element then becomes .0013, .0012.
This is absolutely ridiculous. I want to batch plot and I want to have proper margins, but it seems nothing renders consistently and I am stuck with ill-formatted plots. I would love to batch plot to extents, but as I go through the setup, that is not an option for me, so I appear to be stuck with the layout, which I have never gotten to work properly since it was introduced. What is the trick to make it work?
I am just printing to Adobe PDF with the Acrobat printer.
I've made a simple list box with some text entries. I can drag from any node to Acad's Drawing area and drop it. And without writing any code to capture Drop event, same text is written there in Top Left corner of Drawing area.
I want to Catpure this Drop even of Acad Drawing area. I will then be able to use Jig classes to add my own entities.
I tried Application.DoDragDrop() method and invoke DragTarget.OnDrop() but confused very much
I am having a problem with AutoCad Architecture 2014 on my Mac Pro running Parallels and Windows XP.
The crosshair, grid lines,and actual drawing do not show up on my work space, either Model or Paper. When I installed the software two days ago, the software was working properly. I could see what I was supposed to on the drawing space. Something happened that has caused those items to disappear. I have uninstalled and reinstalled the software two or three times but continue to have the problem. Since I am new to ACA, there is likely a setting that I have overlooked or accidentally changed.
Is there any command that the calculated area may appear on the drawing?
or
How can i calculate several small areas in one command only?
when I saw this option was possible to make the right click act like a space bar or enter when in the drawing area.
On the pc, you can go to options where it is there. I can't find the options for a mac.
While drawing with a tool, normally you have:
1. the brush shape2. the mouse pointer
3. a little image representing the tool in use.
Is it possible to disable both 2 and 3?
How do I calculate the area for a section of an extruded profile and display it in a drawing note? I see how to add a field <AREA> in the text dialog box, but it comes up as N/A in my text box in the drawing. This is also the case for <MASS> and <VOLUME>. How do I get the drawing fields associated with the physical properties of the model?
View 2 Replies View RelatedWhen I use the "Plot" command the rectangular drawing on the right side that is normally hatched to indicate the area to be plotted appears as being blank. I have been using the "Windows" option to define the extent of the plot. When the "Preview" command is used the plot appears as a blank screen.
I have tried various attempts to make this hatched drawing reappear but without success. I know that this needs to be present before I can successfully plot the drawing.
Instance 1. I have lost the Quick Access Toolbar located above the ribbon to the of the right of the application menu button. I can no longer save a drawing and no longer undo or redo any commands that I need to edit while creating a drawing.
Instance 2. I created a drawing saved it and then later came back to it. Went to Veiw tab then clicked the Tile Vertically button. My drawing on one half of the screen and a blank one on the other half. I X out of the screen and started the drawing once again and the drawing area is now labled Drawing1.dwg with a blue square border around the drawing area. With no split screen. I would like to get back to the original drawing area without the blue border going around it titled Drawing1.dwg. I was trying to use the move command to get my drawing into the empty space next to it.
I'm laying out a drawing with all tabletops used in our project for a linolium- fitter to set a price on covering the about 12 tabletops in total.
I dont know if this is correct English or if it make sense at all, but what I was wondering about was: Could you retrieve the total m2 of all the tabletops in a drawing? Or do I have to go back to the aim and get them one by one?
Basically for example (to make this easy to understand) I've got 4 squares with hatches inside and im trying to select one single hatched area in one of the squares (and delete it). But upon selecting it it's selecting the hatches in the other 3 squares (as they were added at the same time). I've carried out a few searches in google etc and experimented with "pickstyle" but with no avail, also I've looked at groups but there are none in the drawing(so I can't ungroup).
I can do it (which I've just realised) by deselecting the boundaries in "edit hatch" but just wondered if there was a quicker way?
How to make my drawing as region that cover the close area. When i select the circle object and tooth object, it not become a region . I already connect all the line but its not working.
View 9 Replies View RelatedIn CS5, is there a way to hide the cursor/ crosshairs while drawing? Since I'm working on a Cintiq I don't need visual reference of where my cursor is - it's where my pen is - and it actually annoys me to have this crosshair cursor in the way of what I'm doing. Ofcourse it's no problem to have a cursor for selecting tools or menus - it's only while drawing that it would be preferable to have a clean working area under the pentip.
View 5 Replies View Related1. when I edit or create text in a particualr drawing, I can't keep the editor from rotating 90 degrees.
I've tried creating a new style and it does the same thing both in model space and in Paper Space.
2. in a new drawing, the editor jumps out of drawing area on right side of drawing space by default.
What is the advantage/usage of limits command? I know it specify the area where could be filled with Grid command. But is it, its only usage? What other usage could be expected from "limits"?
If we want to make the paper space and model space same (draw in same scale, if we use 1/100 scale in metric system, 1 meter in model space is equal to 1 centimeter in paper space), is it a wise idea to set the model space into A4 or A3 paper size by use of LIMITS?
I think its utmost usage is in combination with "snap". Where you can quickly grab the points you want onscreen without need for coordinate input. Would be happy if there is other usage for GRID
Before, I thought limits will specify the area in model space where I can draw (limit the area of model space). But this is in contrary with the fact that model space is limitless and I can draw as far as I want.
It is really hard to understand that there is no limit for model space like real world.
I haven't understood these issues until I read many threads in CT. Now I have got most of them but I think I need some extra study to understand them 100%.
I am having trouble putting sheet size and scale together to find out the drawing area. For example, if the scale is 1"=2" and the sheet size is 17"x11" what would the drawing area be?
View 2 Replies View RelatedI use GIMP 2.6.8 - when I switch to "path" tool or to "free select tool" mouse pointer is allowed to set vertices of the path or selection on non-integer coordinates (i.e. at x=13.5 and y=26.8 pixels)
How can I disable this feature and make mouse pointer (or vertex) snap to pixel boundary (or even to grid). I want it to be able to create paths / selections more accurately sometimes.
(or could I at least enter coordinates for each next vertex manually)
I had Corel Photo Paint v.9, have used it for years in addition to DRAW, but recently my computer died and I had to replace it. I installed it on the new machine, which is running Windows 7 Pro 64 bit, but the line tool suddenly started acting nuts. I would move the cursor to where I wanted to start the line and start the line with a mouse click. The line would then dart half-way down the screen and would be nowhere near the cursor's cross hairs making it difficult to work on images.
So, I figured it was a compatibility issue so I bought Corel Technical Suite X6 and have installed it. The line tool does exactly the same thing. The position of the line is nowhere near the crosshairs of the cursor. Is this a new "feature" or is this a bug? If the former, how can I get it to work like I am accustomed to working (I have used DRAW and Photopaint since the mid 1990's, using version 5.0). If the latter, how can I fix it?
I need to segregate closed polylines in my drawing by area range. Ideally, I would input the number of ranges I need.
Then somehow find the smallest and largest pline area to determine the range values (rounding up to a sensble number)
Then with the ranges determined the polylines would be segregated and moved to new layers.
I've been trying to hobble together pieces but with no joy.