How to make my drawing as region that cover the close area. When i select the circle object and tooth object, it not become a region . I already connect all the line but its not working.
View 9 RepliesI would like to make a drawing for the cover of the control box for my new CNC. The cover will be 4”x 16” x 1/8” thick Aluminum and will have holes for 8 switches, with letters for the function of each switch, plus 4 mounting holes 1/8” diameter in the corners.
My problem is how to establish the center lines for the switches and the mounting holes. So I draw a rectangle 4”x 16” and then if I want my switches to be 1” above the bottom edge of the cover how do I establish a center line to have all switches lined up?
The same for the mounting holes in the 4 corners. How do I establish the center lines if I want to have each hole 1/2" away from each corner?
How to write the letters for each switch? I was thinking to draw a rectangle above each switch and center the description inside each rectangle. Is this the best way?
I want to have a closed region that can display the area of the region (I want to see it on the screen without having to click on the area and look in the properties). Is this possible?
I want the closed region to be dynamic i.e. when I change the area of the region the displayed area should automatically change. Is this possible?
Even better would be if autocad could give the area a id and in a table that can be exported to excel reports the area of the region. Then if I have many regions autocad give every region a new id and all the id:s and areas are reported in the same table.
I’d like to ask how I can measure the area of a region, defined on a TIN surface. ( i.e. the area of the bounded topographic terrain )
View 8 Replies View RelatedSuddenly I got this issue when I draw an area boundary its not possible to close it with "enter" or "spacebar"..
View 9 Replies View RelatedI've created an area plan of my existing building and coloured the areas using a Legend based on the area name.
I now want to do the same on the 'Proposed' Area plan, showing the new areas in the general plan ignoring the existing walls, but when I colour the areas the walls show through the solid colours, is there any way I can get the areas to cover up the walls on this plan - something line draw order.
I know you can select the area, and change the Colour Scheme Location to foreground or background - but the walls always show through...
I created a panorama in PTGUI and imported it into LR5 as a tiff file. There is a small area in the upper right corner that is white as the image did not fit the rectangle exactly. I wanted to use the clone/heal tool to replicate a portion of sky to cover that area, but no matter what I do it will not put anything in that area - it just stays white. I was able to do this in version 4.x. What is going on?
View 4 Replies View RelatedI downloaded multi-batch as someone here said they like it for batch plotting. Once installed, however, it has changed a setting in AutoCAD. I can no longer open more than one drawing at a time. If I have a drawing open and try to open another drawing it asks me if I want to save the current open drawing.
I can not close a drawing either without exiting AutoCAD or trying to open another drawing. I un-installed multi-batch but it did not fix the problem.
I'm trying to figure out how to make a skewed corridor region for a bridge project (just one assembly I need to skew) the rest of the corridor is split into regions, the approach slabs and bridge deck assemblies are at about a 30 degree angle to the alignment.
View 5 Replies View RelatedI need to make labels in plan to show the names of the region I make in corridor.
View 3 Replies View RelatedHow to close the selected area using the Path Tool? I expected, after clicking in the initial node the area would appear as selected, but no..
2.4.8
Grade 7 or Grade 8 ...I was thinking about having the students make CD covers. Could someone give advice or recommendations? They know the lasso tool, opacity, text tool.
View 9 Replies View RelatedSee the image below, in particular I have a seperate layer READ MORE, I want to save this image as a PNG file and in my HTML page make the READ MORE region like a clickable button. I know I can slice this into a seperate image and wrap in a <DIV tag to do this.
View 1 Replies View RelatedI want to create an album cover with edited photos and give it a 60's&70's feel, a lo-fi, old camera feel.
Examples:
A Saucerful of Secrets - Pink Floyd
Houses of the Holy - Led Zeppelin
what plugins are used in this video?
[URL].......
I need to do a print job for a album(vinyl) cover, I don't have problem with the art work but I'm not too familair with print, I know I have to do CMYK colours, but what is bothering me is what size do I make a vinyl cover in? I can't find measurements online.
View 3 Replies View RelatedAlright, so I want to make pixel art for a facebook cover, and I want to make the pixels large.
Question: How do I take the resolution down and keep the print size the same? I want to just be able to click and have a large pixel form.
I have this pan open I left side of my AutoCAD 2010. How can I close it?
I don't see any cross on top of the pan to close it.
I need to close drawing file which is inactive. How i can achive same.
View 3 Replies View Relatedhow to make my picture look just like tha scarface cover and how to make my picture look cartoonish...and different cool images...
View 1 Replies View RelatedI want to make an album cover, the file is 3008x2000. What is the best way to get it in the right dimensions for a CD wallet cover? Do I first edit everything, adding title etc. and then scale and crop it? Or crop and scale it first?
If you look at the picture in the background you see light coming through the back wall, it might be nicer if at least the large light bulbs will be removed and covered by color, any recommendations how to do that?
Here are the files: [URL].....
wallet template: [URL].......
I am building my second book with Blurb, this time with LR4
it's going to be a small square and for the back and cover, I have built a file with photoshop and when I drop it to first page, no way I can "slide" it to cover the entire back+ cover
see my problem [URL]
After doing a few renders, my drawing now reverts to wireframe every time I close it, save it, regen. how to stop this from happening? It will basically not stay in 2D wireframe and the dwg has become very sluggish.
View 3 Replies View RelatedI am working with an action macro to be able to use the EXPORT PDF option (save into current folder as DWG with no user input) / save the current drawing / and close.
At present i am able to get the macro to export the pdf and then (user input to directory to save and to overwrite the previous file) then save the file but cannot close the drawing.
I'm making an ebook cover with a white background and I want to put a grey pixel cell frame around it but I don't know how to do it. I'm only getting started with getpaint.net.
View 3 Replies View RelatedI've seen this happen with a couple of the previous releases, but not for some time. After the CLOSE command is issued, the drawing graphics remain displayed but no AutoCAD specific keyboard or mouse input is accepted. More of an annoyance, I guess, as Control + O will then allow opening of another drawing file. This just started today for no apparent reason after using 2014 for the past week or so. Prior to this happening, my workstation locked up completely while trying to close a CAD file and Task Manager wouldn't take any input.
Win 7 with Service Pack 1, 64-bit
16 GB Ram
Intel Core i5 CPU
How do I get the draw order to stay the way I want when I close and reopen a drawing? I even think that a couple times, without even closing and reopening the drawing, the draw order has flipped back to the way I don't want it after changing it.
View 3 Replies View RelatedI'm trying to take the square cd cover image and make a cassette tape cover, or j-card, with that image.
Here's a picture of a j-card template.
Right now all I want is the front cover, spine and tail. I wasn't sure if the templates I found were compatible so i tried to make my own template. What I did was make three separate ones. One for the front cover, one for the spine and one for the tail. I was able to take the square image and use the scale tool to make the image fit inside the front cover. The first problem I had was not knowing if the image quality was good enough to print. It seemed easier to use inches when I made the template and not pixels. So I made the front cover template 4 in by 2.5625 in. I exported the image as a jpg but the final image looked too small. So now I'm not sure how many pixels I need for a printable picture.
Now with the spine and tail most likely I'll just chose a background color and type over it...Artist, Album Name, Song Titles ext. My plan was to use the jpg images I exported and paste them together, then save that final image as a jpg. and print.
The user is running Autocad 2010, and she was able to perform this function last week. Nothing has changed, and a system reboot did not correct the issue.
View 2 Replies View RelatedI have started Brian Benton's tutorials and hit a problem on the second one, "Quick Run Thru". The problem is that the object drawn is too small on the screen to be useful. This was the result of drawing the 50x30 rectangle called for in the tutorial. My First Rectangle17-07-2013 8-15-10 AM.jpg What setting adjustment is required to show the rectangle as it appears in the tutorial - i.e. larger on the screen so I can do something with it.
View 6 Replies View RelatedI create a palette dialog. I put the Button icon on it. When I click the Button, the cursor still on the palette dialog. I want to the cursor move to dawing area(any drawing background) just after I click the Button. Is it possible?
View 2 Replies View Related