I am working with an action macro to be able to use the EXPORT PDF option (save into current folder as DWG with no user input) / save the current drawing / and close.
At present i am able to get the macro to export the pdf and then (user input to directory to save and to overwrite the previous file) then save the file but cannot close the drawing.
I used to be able to open a drawing then close it right away, if it was not the drawing I was looking for, as long as I didn't pan, zoom, or do anything else. Almost a year ago I had a pop-up with-in AutoCAD that they reccommend I make this selection. I can't remember what it said really, it was something about a script or lisp loading at each drawing opening. Well, the result is the 'Drawing 1' does not disappear when I open another drawing and I would like that to stop. Also as I said it does it to every drawing. how to stop this? I tried the 'startup' command and that is not it. It is not a big thing just something I think is a waste of my time having to close that drawing each time I open AutoCAD. Not sure it matters but I am using AutoCAD 2012
View 7 Replies View RelatedI have one problem in this macro this macrofor drawing exporting to PDF.
How to save the pdf files in same location(Converting Drawing file location) and same number(Drawing file number).
Second one is in my inventor window I opened 20 files of drawings and how to set the macro for export to pdf all the 20 files in once.
Public Sub PublishPDF()
' Get the PDF translator Add-In.
Dim PDFAddIn As TranslatorAddIn
[Code]....
We have two computers running AutoCAD 2013 with Windows 7 64 bit and both crash regularly on save and close with about 2/3 of the drawing files. Typically it won't crash if I have only one drawing file open and then save and close. With more than one file open the system crashes regularly on both computers. Our service pack updates are current.
View 1 Replies View RelatedSince AutoCAD preserves the entire database list of commands used on a drawing from the beginning, is it possible to "back up," like using undo, after a drawing is saved and closed? Is there a way to come back the next day and start undoing the previous day's work?
View 4 Replies View RelatedI use autocad architecture 2013 and it works just fine until the save turns to qsave whenever i want to save a drawing by save, save as and ctrl+s it works as qsave..how can I turn it back to SAVE ?
View 9 Replies View RelatedI've seen this happen with a couple of the previous releases, but not for some time. After the CLOSE command is issued, the drawing graphics remain displayed but no AutoCAD specific keyboard or mouse input is accepted. More of an annoyance, I guess, as Control + O will then allow opening of another drawing file. This just started today for no apparent reason after using 2014 for the past week or so. Prior to this happening, my workstation locked up completely while trying to close a CAD file and Task Manager wouldn't take any input.
Win 7 with Service Pack 1, 64-bit
16 GB Ram
Intel Core i5 CPU
How do I get the draw order to stay the way I want when I close and reopen a drawing? I even think that a couple times, without even closing and reopening the drawing, the draw order has flipped back to the way I don't want it after changing it.
View 3 Replies View RelatedI have been using the addin "Save Run Macro" to automatically run a macro every time the "Save" button is pressed.
Any of the following questions about "Save Run Macro"?
1] When I protect the macro from viewing (so I can protect my code) "Save Run Macro" does not see the macro.
2] When I save the part for the first time (ipt, iam or idw/dwg) the macro does not run. I always need to run the macro again.
As many of us seam to do the option to save by default to an older version of AutoCAD or universal DXF format is selected, my problem is however when you save an existing drawing a prompt appears asking if 'Drawing*.dxf last saved in AutoCAD 2004 format. Save in AutoCAD 2013 Drawing format?' this has annoyed me for years!
I have set it as default DXF 2014 for a good reason I don’t want a prompt asking me if I want to then save it as 2013 or I would have set it like that on my default setting, gets on your nerves when you are doing 100's of files.
Win7 64 Pro - Asus P8P67 PRO - i5-2500k CPU O/C@4.5Ghz- OCZ Vertex 2 SSD - 8GB Ram - GTX550 Ti - SpaceExplorer.
I lost my dialog boxes for SAVEAS and EXPORT. I tried the CMDDIA system variable but had no luck. I can't stand having to type in full paths for files that I'm trying to save.
I would imagine that alot of my other dialog boxes default back to command line as well.
I recently started having trouble when I try to save a file. It started about an hour ago. I have been working on this file all day with no problems. What is happening is when I do a quick save or a save as I get an error that says "unable to save to drawing F:NNorthview SchoolsHS - Phase 5, 6 & 7NH-EPSF1A13.dwg. Drawing saved to F:NNorthview SchoolHS - Phases 5,6 & 7savACD.tmp"
If I do a save as It will say the same thing but it will delete the existing file that I tried to save over. I have to do another save as to get the file back. I think this is specific to this drawing because I have not had it happen with any other file.
I ran Recover on the two exref files as well as the working file. No errors are found. I have purged all the files and tried again but it did not work.
I am using Map 3D 2013 on a Windows 7 machine and am getting the following error when I try to do any save, q save or saveas: "One or more objects in this drawing cannot be saved to the specified format. The operation was not completed and no file was created."
I was working in this file yesterday and received the same error at one point. I shut CAD down and did something for a few hours before I came back and everything operated normally for a little while. I was able to make edits and save. But then this morning the error is back. Even upon opening the file and immediately trying to qsave it will give me the error. I have run an audit, purged, tried to copy everything out and save to a new file. Nothing appears to be working.
We do run network licenses and I am pulling my drawings from a server, nothing is local to my machine.
Any macro that will close the Object Manager Docker then re open it again? Due to the bug with it, the objects in it disappear, or the icons for visible and print stop toggling, so I have to close it and reopen it. Tried recording one, but the recorder ignored my closing and opening. Just thought it would be handy, for when it locks up like that to press one button, rather multiple buttons and menus.
View 7 Replies View RelatedThe following pictures are the same areas of a drawing zoomed in (cannot post proprietary DWG or PDF). In Layout mode I have the following
When I try to make a PDF of it (either by going File>Export>PDF or File>Print>Plot>select DWG to PDF.pc3) it produces the following
What is going on?
I have a drawing with dimensions and number (number and text number). I want output (Can select each object) to a file excel. write a lisp do.
View 6 Replies View RelatedI have problems with saving my drawing using the save option. I click save but when i close the drawing and reopen it i realise it didnt save at all. I actually have to 'save as' to get it saved.
View 4 Replies View RelatedSeveral times, with different files, I get a message when I try to save a drawing using ctrl-S (or when clsoing an un-saved dwg);
Unable to save to drawing B: (file location folder)file name.
Drawing saved to B: (same file location folder)savD214.tmp
The only option is to click OK
Now there are several .tmp files in my job folder. I haven't tried to open them or anything else.
The original file will be lost if I close the drawing. I've had this happen when I clsoe the drawing before saving it - I'll get a message asking if I want to save the draiwng before closing it, and then I'll get this message, click OK, and the file will be gone. I have to to the .bak file, make a copy of it and change the file extension name to .dwg to get the file back.
If I get this message when I'm just doing a ctrl-S save, I immediately do a "save-as", copy over the original file name, and everything seems to be fine.
I have the same problem reported here : [URL]
Fresh installation of Windows Small Business 2011 standard
Disabled offline and cache on shared directories
Removed the router (server and computers in "standalone", just joined by a gigabit switch 5 ports, 2m of cables between the compure and the server)
Installed latest evaluation of Autocad LT 2013
No Antivirus; firewall settings by default
The user is the only one who access to the autocad files.
Still the problem.
The user does want work on the network anymore unless the problem is solved, which is annoying because only the server has a backup routine.
I downloaded multi-batch as someone here said they like it for batch plotting. Once installed, however, it has changed a setting in AutoCAD. I can no longer open more than one drawing at a time. If I have a drawing open and try to open another drawing it asks me if I want to save the current open drawing.
I can not close a drawing either without exiting AutoCAD or trying to open another drawing. I un-installed multi-batch but it did not fix the problem.
My firm is starting a project....the Structural side is going to be don in Revit 3d and our Mechanical side uses Autocad w/Cadworxs for our 3d package. Is it possible to export the Revit steel drawing and import that model into Autocad as an xref?
View 1 Replies View RelatedI have a data set including .shx .shp .prj and .dbf files each named the same for landuse, rail, road, etc for a single city. How can I open these files to export a simple line drawing for use in a thesis project as a map.
View 4 Replies View RelatedHow / which system variable to change such that the Save List As dialog box don't appear every time I click on the publish button?
View 2 Replies View RelatedI'm looking for a script that makes automatically PDF AND DXF when i close a IDW drawing.
So on close export to PDF and DXF
I'm trying to create a menu macro to close and dont save the drawing without it prompting me.
View 1 Replies View RelatedWe want to change iassemblies in a table using macro. When we change an iassemblies, inventor asks "Do you want to save changes to ......?". There are many iassemblies in our model, so it takes serious amount of time. We can disable all messages using macro, But this time after macro completion, there may be some errors in model, because we dont accept all changes. How can we accept all changes while running macro?
We use SilentOperation property. but in Save dialog, there are some parts indicated "yes" and some indicated "no". how can we change them "yes" and save all dependents?
Running Autocad Architecture 2014:
I am running into a problem, I like to use the annotative line type scale when I open the drawing i have to set the MSLTS to (0), and PSLTS to (0), LTS is already at (0). When I set these settings then save the drawing (saves as autocad 2013 version), close it down and re-open it the MSLTS and PSLTS settings reset back to (0). I've tried everything to get these settings to save but nothing works.
I want to keep these settings MSLTS (1), PSLTS (1), and LTS (1), after a save and re open they reset to (0)
after a bindXref i save the dwg in a path 'Archive' but if the file already exist i demand the user if i cant erase the dwg in archive before write my dwg. I want to force the user to close the dwg without save if the reponse is 'No'. (The function have BindXref so the dwg do not save this). No save only for this dwg not the other already open (I not know how to use event so.. and my DLL is not loading on the launch of autocad)
View 3 Replies View RelatedI'm currently using Inventor 2012 and i need a macro (code): I want to know if it's possible to export all the information from the parameters list (everything, names, values, tolerances, comments...) to an excel spreadsheet or a txt file (it can be a table, or a CVS file, i just want that information!), from a part file (.ipt) or a drawing file (.dwg).
Currently, i can only export the parameters' names and values , but i can't get to the tolerance values and comments . . .
i need a macro in VBA who export the structurated part list in xls separated by comme with only two cullom in order: Quantity and Part Number.
This .xls file mus be saved in the same folder where the .iam file is saved and with the same name of the .iam file. How to make this marco????
Is it possible to run a VBA macro every time the "Save" button is pressed on "IPT" files?
View 9 Replies View Related