AutoCad :: MSLTS Resets To (0) After Save And Close
Dec 13, 2013
Running Autocad Architecture 2014:
I am running into a problem, I like to use the annotative line type scale when I open the drawing i have to set the MSLTS to (0), and PSLTS to (0), LTS is already at (0). When I set these settings then save the drawing (saves as autocad 2013 version), close it down and re-open it the MSLTS and PSLTS settings reset back to (0). I've tried everything to get these settings to save but nothing works.
I want to keep these settings MSLTS (1), PSLTS (1), and LTS (1), after a save and re open they reset to (0)
View 2 Replies
ADVERTISEMENT
May 15, 2013
I used to be able to open a drawing then close it right away, if it was not the drawing I was looking for, as long as I didn't pan, zoom, or do anything else. Almost a year ago I had a pop-up with-in AutoCAD that they reccommend I make this selection. I can't remember what it said really, it was something about a script or lisp loading at each drawing opening. Well, the result is the 'Drawing 1' does not disappear when I open another drawing and I would like that to stop. Also as I said it does it to every drawing. how to stop this? I tried the 'startup' command and that is not it. It is not a big thing just something I think is a waste of my time having to close that drawing each time I open AutoCAD. Not sure it matters but I am using AutoCAD 2012
View 7 Replies
View Related
Mar 22, 2012
I'm trying to create a menu macro to close and dont save the drawing without it prompting me.
View 1 Replies
View Related
Jun 5, 2013
We have two computers running AutoCAD 2013 with Windows 7 64 bit and both crash regularly on save and close with about 2/3 of the drawing files. Typically it won't crash if I have only one drawing file open and then save and close. With more than one file open the system crashes regularly on both computers. Our service pack updates are current.
View 1 Replies
View Related
Feb 7, 2013
Since AutoCAD preserves the entire database list of commands used on a drawing from the beginning, is it possible to "back up," like using undo, after a drawing is saved and closed? Is there a way to come back the next day and start undoing the previous day's work?
View 4 Replies
View Related
Jan 17, 2013
after a bindXref i save the dwg in a path 'Archive' but if the file already exist i demand the user if i cant erase the dwg in archive before write my dwg. I want to force the user to close the dwg without save if the reponse is 'No'. (The function have BindXref so the dwg do not save this). No save only for this dwg not the other already open (I not know how to use event so.. and my DLL is not loading on the launch of autocad)
View 3 Replies
View Related
Aug 7, 2013
I have a problem. I use AutoCAD 2010. I want to know the use click save or discard button when close the document. I know the "Saved" Property of AcadDocument can tell me the result. However, I could not use the AcadDocument Class. Because there is another plug-in, when i use the com class just like AcadDocument , it will tell some error.so i only can use .net Class just like Document. Is there any Proprty to get it ?
View 3 Replies
View Related
Sep 4, 2012
I am working with an action macro to be able to use the EXPORT PDF option (save into current folder as DWG with no user input) / save the current drawing / and close.
At present i am able to get the macro to export the pdf and then (user input to directory to save and to overwrite the previous file) then save the file but cannot close the drawing.
View 1 Replies
View Related
Apr 30, 2013
I have some code (below) that will open my embedded excel spread sheet and it works great. Now I need the code to save and close the excel file after it’s been open.The embedded excel spreadsheet pushes some stuff the model and does a couple other thing. So all I really need is for the excel file to open, save, and close when the rule is run.Imports Inventor.
OLEDocumentTypeEnumExcelApp = CreateObject("Excel.Application")Dim ExcelFile As ReferencedOLEFileDescriptorExcelFile
=hisDoc.Document.ReferencedOLEFileDescriptors.Item(1)ExcelFile.Activate(kEditOpenOLEVerb, ExcelApp)
View 4 Replies
View Related
May 26, 2010
how to make a routine for zoom extents, save all, and close all open drawings in a single routine?
View 3 Replies
View Related
Jan 7, 2013
I often open multiple images to make several changes, then use Close All and when it prompts "Do you want to save changes to ... before closing?" I check off the box to "Apply to all" and say Yes. This saves lots of time when adjusting several multi-hundred MB images. Imagine my surprise today when it closed an image without saving! I had to repeat about 30 minutes of work as a result.
I thought I had somehow accidentally clicked "No" to saving, so I made sure to pay close attention the next few times I used Close All to save work. It worked fine until a moment ago when it did it again.
View 6 Replies
View Related
Mar 29, 2013
In the menu under File there is a command "Close and Go to Bridge" Is there a way to do something similar for returning to Lightroom after a "Save"?
View 1 Replies
View Related
Sep 22, 2013
CorelDRAW X6 has been lovely and fast for me these last few months but the reason I quit Corel for a number of years was that, after a while it seemed to slow down. Now, suddenly, when I save a file of exit the program freezes for approx 35 seconds before finally closing. It makes no difference where I save the file (on my SSD C Drive or elsewhere). I have a 6 core, 32gb RAM etc and, as I was saying, it worked until today but suddenly this.
View 8 Replies
View Related
Mar 25, 2013
Whenever I edit (a copy) of an image in Photoshop CS6 from Lightroom 4.3 (Photo/Edit-In), after I save and close the image in CS6 the new psd image does not show in Lightroom. In order to see the image in Lightroom, I need to close Lightroom and then reopen Lightroom. It is almost like Lightroom needs to "refresh". Any solution that does not require me to close Lightroom? I have tried to use View/Sort by extension, filename, edit time, etc. with no effect.
View 4 Replies
View Related
Aug 2, 2011
I use CorelDRAW on a daily basis and recently the program takes a lot of time to open/close/save my files, or sometimes it'll simply freeze.
View 6 Replies
View Related
Apr 28, 2012
For some odd reason Autocad will not maintain my workspace customizations. For example I typically can customize my workspace by toggling which toolbars are shown and where they are placed. Then I can close autocad and when I start it again all the customizations are present. Now when I start autocad it loads the default workspace. I should have to customize my workspace every time I start autocad. I also shouldn't have to create any custom workspace profile or anything like that. AutoCad used to simply save any GUI customizations made automatically. I need it to get back to that.
View 9 Replies
View Related
Apr 11, 2013
Every time I open a new drawing(without closing AutoCAD) my workspace resets ea time and I lose all toolbars and settings.
Using AutoCAD 2012
View 4 Replies
View Related
Jan 26, 2011
Opening an old file LTSCALE every time resets to 100 instead of 1.
We tested MEASUREMENT and MEASUREINIT but this problem keeps coming back.
It happens on my colleagues computer not mine!
Is there some system variables set locally causing this only on some computers?
View 6 Replies
View Related
Jun 5, 2013
I am able to customize my quick access toolbar in Inventor 2014; however, when I close Inventor and re-open it again the quick access toolbar has been reset to what it was before. For example I will add "open from vault" and/or "iProperties" options to the QA toolbar but when I re-open Inventor I have to add them all over again.
View 1 Replies
View Related
Feb 21, 2013
I'm having troubles with the inventor 2013 shortcuts.
Actually, i have to confirm my selection when i have 2 aliases starting with the same key (for example : D for dimension, and DF for discussion forums).
The fact is i never use the DF shortcut, and want to clean it up, or at least change it. When i do, it works well, until i restart inventor.
When i restart Inventor, shortcuts configuration resets and i have to do the change again.
I found a way to not spend that much time on changing them, with exporting/importing settings, but it's still annoying to import every time i start Inventor.
Dell precision M6600
Quadro 3000M
Windows 7 64 bits
French version of Inventor
intel i7
View 4 Replies
View Related
May 16, 2013
We have the following problem (on AIS2010): we often recycle existing designs with small changes/adapting, means: the (sub)assembly is saved with a new name and part number, and the subcomponents that need to be changed, get a new part number and file name too. So we save a copy, save the parts need changes and then replace the "old" parts in the new assy.
Doing so unfortunately retains the "name" of the component in the model browser tree. Why is that in the first place.
But I'm trying to write a macro that resets the dspalyed names in the browser.
What I found so far, is that under BrowserNodeDefinition, there's a Label property which contains the displayed name, and this does not get changed when the part is replaced. So I thought, I can just compare these BrowserNodeDefinition.Labels with the actual file names and forge a new Label from the new name and the sequence number, however, the BrowserNodeDefinition object is read only, can't be changed.
I haven't found anything else that would contain this name that is displayed in the browser.
View 8 Replies
View Related
Mar 6, 2013
The model space orientation is different than the paper space orientation (I have my viewport rotated) but whenever I am working in paper space and double-click inside model space to activate the viewport, it resets/reorients the view to match the orientation in model space. It also changes the scale. If I lock the viewport and then double-click inside to activate model space it does not change.
I don't want to always have my viewports locked to work on them in paper space.
View 4 Replies
View Related
Apr 19, 2009
I start Photoshop CS3 some of the preferences set themselves back to default even though I set them to soemething else the last time I opened it. What annoys me the most is the navigator window which resizes itself every time.
View 8 Replies
View Related
May 16, 2013
My Lightroom 4 reset itself last night to the original - all customization, presets I created and purchased, all images are gone.
View 7 Replies
View Related
Sep 24, 2012
My monitor is calibrated with Spyder2. Every time when I start Photoshop and open file (new or existing) my calibration info is gone. I have to apply color calibration for my monitor again. Why Photoshop resets my monitors color calibration info and how can I avoid this?
View 10 Replies
View Related
Jul 25, 2008
when I start my Photoshop, everything resets to the default settings, from workspace to general preferences. Why does it do this and is there a way to stop it from doing it?
View 7 Replies
View Related
May 28, 2013
Since I started with the 2014 version of 3dsmax Design I have serious troubles with the Viewport Clipping settings. The yellow arrows 'resets' about 90 percent of the times when I change viewport and sometimes also when I attach objects together. Ideally the top arrow should be below the top yellow line in the viewport setting and the lower one above. What I mean by that they 'resets' is that the top one for no reason goes all the way to the top and the lower goes all the way to the bottom. The result is a very weird looking viewport. Sometimes both goes to the top or bottom and the whole scene is invisible.
If I had been new with 3dsmax I had given up a long time ago not understanding why my hole scene either disappears completely or looks weird. I consider going back to 2012 now since its frustrating adjusting the clipping arrows every minute. Slows down my work.
View 2 Replies
View Related
Mar 18, 2013
every time I restart my PC, the layout in Bridge resets. Starting Bridge as an Admin doesn't work.
I'm running Photoshop/Bridge CS6 on Windows 8 (64bit)
I put in two screenshots to show the before and after:
It isn't a big deal, but it's annoying to reposition everything after every restart
View 6 Replies
View Related
Oct 13, 2011
direc3d 9 resets to defaults. annoying, everytime i start max- have to set to my prefferences (anisotroping and texture sizes)
direct3d 10 "display all triangle edges" on/off makes no effect, i still see all triangles, that confuses "use cashed drdx meshes" removes those triangles but they appear entering polygon editing on some files those two checkboxes seems to have no effect at all, i see lots of triangles i dont want or need to see
mobile ati radeon 5650 latest drivers,
8gb ram,
intel i5 cpu (swithcable graphics, yes, i work with ati graphics card! not intel
max 2011 64bit design SP2
win 7 64bit
View 2 Replies
View Related
Jul 26, 2011
I finally installed Revit 2012. The first order of business was customizing the QAT to include everything I regularly use, and appear below the ribbon.
However, everytime I close/reopen the program, it resets and loses everything. It was not an issue in 2011.
View 3 Replies
View Related
Dec 11, 2012
I'm creating an animated gif from a video clip (cinemagraph). In order to acheive the effect I need, I need to move each layer with the move tool to get an object to stay in the same position. I have gone through layer by layer and used the move tool to move the contents of each layer. When I play the animation I see the layers in the position I put them in. I stop playing the animation the contents of each layer snap back to their original positions. I have tried using the lock tools (both lock position and lock all) but they don't make a difference. why layer positions would reset when creating animations and how to get it to stop?
View 6 Replies
View Related
