Photoshop :: CS6 Images Sometimes Not Saved When Using Close All And Instructed To Save
Jan 7, 2013
I often open multiple images to make several changes, then use Close All and when it prompts "Do you want to save changes to ... before closing?" I check off the box to "Apply to all" and say Yes.  This saves lots of time when adjusting several multi-hundred MB images. Imagine my surprise today when it closed an image without saving! I had to repeat about 30 minutes of work as a result.Â
Â
I thought I had somehow accidentally clicked "No" to saving, so I made sure to pay close attention the next few times I used Close All to save work. It worked fine until a moment ago when it did it again.
View 6 Replies
ADVERTISEMENT
Apr 12, 2011
I am trying to optimize some images for web to have a smaller file size. I am using "Save for Web" feature, and every time I try to save a file, the actual file output size is a lot bigger than the size it shows on the "Save for Web" dialog.
For example, I have a 607 bytes .gif, when I open "Save for Web" it shows 207 bytes for 16-colors but when I save it the output file is 1.22 kb.
View 4 Replies
View Related
Dec 17, 2013
Is there a way to revert an open, edited part back to its most current save? Or to close an edited part without its changes persisting in assemblies that reference it?
I often work on parts with their associated assemblies open; Inventor won't let me discard changes until all related assemblies are closed. Searching brought me to a thread describing the same issue from 2006. I'm using Inventor 2010.
View 9 Replies
View Related
May 15, 2013
I used to be able to open a drawing then close it right away, if it was not the drawing I was looking for, as long as I didn't pan, zoom, or do anything else. Almost a year ago I had a pop-up with-in AutoCAD that they reccommend I make this selection. I can't remember what it said really, it was something about a script or lisp loading at each drawing opening. Well, the result is the 'Drawing 1' does not disappear when I open another drawing and I would like that to stop. Also as I said it does it to every drawing. how to stop this? I tried the 'startup' command and that is not it. It is not a big thing just something I think is a waste of my time having to close that drawing each time I open AutoCAD. Not sure it matters but I am using AutoCAD 2012
View 7 Replies
View Related
Jan 14, 2014
What is going on with Lightroom 5? I upgraded from 4 and now it doesn't export with a maximum long edge of 2166 pixels even though that is what it is being told to do.
View 3 Replies
View Related
Mar 29, 2013
In the menu under File there is a command "Close and Go to Bridge" Is there a way to do something similar for returning to Lightroom after a "Save"?
View 1 Replies
View Related
Mar 22, 2012
I'm trying to create a menu macro to close and dont save the drawing without it prompting me.
View 1 Replies
View Related
Feb 1, 2007
I have version 7.
downsizing my photos useing the `save to web' option, thus reducing the pixels so that I can use them on my web site. However, something strange has suddenly happened when I use the save to web option and instead of being saved in the new smaller format, my pictures simply morph back to their origional size.
View 9 Replies
View Related
Jun 5, 2013
We have two computers running AutoCAD 2013 with Windows 7 64 bit and both crash regularly on save and close with about 2/3 of the drawing files. Typically it won't crash if I have only one drawing file open and then save and close. With more than one file open the system crashes regularly on both computers. Our service pack updates are current.
View 1 Replies
View Related
Feb 7, 2013
Since AutoCAD preserves the entire database list of commands used on a drawing from the beginning, is it possible to "back up," like using undo, after a drawing is saved and closed? Is there a way to come back the next day and start undoing the previous day's work?
View 4 Replies
View Related
Dec 13, 2013
Running Autocad Architecture 2014:
I am running into a problem, I like to use the annotative line type scale when I open the drawing i have to set the MSLTS to (0), and PSLTS to (0), LTS is already at (0). When I set these settings then save the drawing (saves as autocad 2013 version), close it down and re-open it the MSLTS and PSLTS settings reset back to (0). I've tried everything to get these settings to save but nothing works.
I want to keep these settings MSLTS (1), PSLTS (1), and LTS (1), after a save and re open they reset to (0)
View 2 Replies
View Related
Jan 17, 2013
after a bindXref i save the dwg in a path 'Archive' but if the file already exist i demand the user if i cant erase the dwg in archive before write my dwg. I want to force the user to close the dwg without save if the reponse is 'No'. (The function have BindXref so the dwg do not save this). No save only for this dwg not the other already open (I not know how to use event so.. and my DLL is not loading on the launch of autocad)
View 3 Replies
View Related
Nov 18, 2006
I'm doing some work in photoshop, well, more like fooling around with Photoshop. But when I'm all done with a picture, save it as Jpg and upload the image, its about 25%-50% smaller then what the original psd is ....
View 2 Replies
View Related
Sep 11, 2012
Issue is this: Photoshop's 'Save for Web & Devices' indicated file size does not appear to match size of actual exported file. I made a couple dozen animated gif banner ads that are required to be under 40k. I'm using PShop CS5 v 12.0.4 x64. I'm on an iMac osx 10.6.8
Â
Save for Web & Devices says a file will be 39.97k
Â
I click Preview to see the animation and get details. It agrees, preview file is 39.97k
 Â
So I save, and look at exported file in Finder (Get Info) And it is 57k
Â
I understand that this is portion of the hard drive used for storage and bigger than 39.97k because of smallest chunk size that can be allocated by Finder. But isn't second number (53,337 bytes) actual file size?
Â
So, question:
1) Is the file size still actually just 39.97k and if so is there a way to see this to prove to myself and the client?
2) If saved file is truly larger than export size indicated by photoshop, is there a straightforward way to accurately predict size at which file will be saved? Or is trial-and-error my best bet.
View 2 Replies
View Related
Dec 1, 2012
I am running cs6 on both PC and Mac. On my pc if I save a Photoshop file on it as a save as, it does not open the file immediately. I have to close the original file, find the file then open it. Very time consuming and also confusing if you are working fast. On my Mac if i save a document in Photoshop, doing a save as, it saves the doc, and opens it right there and you just continue to work.
View 7 Replies
View Related
Jan 23, 2014
Using Elements 6 or 11, (a purchased copy), when I add text and then save the text disappears in the saved copy but remains in the Elements copy. I've spent hours on this being very careful that the save location is where I want it. The photos shown in the bin do contain the text. ??
View 1 Replies
View Related
Sep 22, 2013
CorelDRAW X6 has been lovely and fast for me these last few months but the reason I quit Corel for a number of years was that, after a while it seemed to slow down. Now, suddenly, when I save a file of exit the program freezes for approx 35 seconds before finally closing. It makes no difference where I save the file (on my SSD C Drive or elsewhere). I have a 6 core, 32gb RAM etc and, as I was saying, it worked until today but suddenly this.
View 8 Replies
View Related
Aug 7, 2013
I have a problem. I use AutoCAD 2010. I want  to know the use click save or discard button when close the document. I know the "Saved" Property of  AcadDocument can tell me the result. However, I could not use the AcadDocument Class. Because there is another plug-in, when i use the com class just like AcadDocument , it will tell some error.so i only can use .net Class just like Document. Is there any Proprty to get it ?
View 3 Replies
View Related
Sep 4, 2012
I am working with an action macro to be able to use the EXPORT PDF option (save into current folder as DWG with no user input) / save the current drawing / and close.Â
At present i am able to get the macro to export the pdf and then (user input to directory to save and to overwrite the previous file) then save the file but cannot close the drawing.
View 1 Replies
View Related
Mar 25, 2013
Whenever I edit (a copy) of an image in Photoshop CS6 from Lightroom 4.3 (Photo/Edit-In), after I save and close the image in CS6 the new psd image does not show in Lightroom. In order to see the image in Lightroom, I need to close Lightroom and then reopen Lightroom. It is almost like Lightroom needs to "refresh". Any solution that does not require me to close Lightroom? I have tried to use View/Sort by extension, filename, edit time, etc. with no effect.
View 4 Replies
View Related
Feb 24, 2007
How do I check to see if jpg images have been saved at a resolution of 300 dpi?
What if my original jpg image resolution is less than 300 dpi and I require 300 dpi; Is it possible to resave them to a smaller image size and in doing so increase the dpi?
What if a jpg image says it is ‘.jpg @ 25%RGB’ and I am supposed to save the files in CMYK; What is this ‘Mode’ setting and can it be changed through resaving the jpg somehow, or is it changed to CMYK when you open it in Photoshop and choose CMYK in the'Rasterize Generic PDF Format' window?
I am using XP and Photoshop 7.
View 1 Replies
View Related
Aug 2, 2011
I use CorelDRAW on a daily basis and recently the program takes a lot of time to open/close/save my files, or sometimes it'll simply freeze.
View 6 Replies
View Related
May 11, 2008
I opened and modified several JPEG images with Photoshop CS2. Now none of these files can be opened by Photoshop or any other program. All of the files seem to have a non-zero size, but when I try to open them in Photoshop, it does not generate an error, it merely offers to create a new file with the same image properties (size, etc) as the saved image on disk.
I've also tried several other programs to open these files, and none of them can open them. FYI, one thing that all of the files have in common is that they are all saved with the absolute minimum compression settings.
View 1 Replies
View Related
Apr 25, 2013
I have been using Elements 9 for more than a year. Today it started doing something crazy. When I edit a photo (did this using "guided edit"), instead of saving the edited version (in a version set), all I get is a grey screen with an hour glass. When I go to my hard drive, I find both the original and the edited version saved, but it no longer shows up in Organizer.
View 5 Replies
View Related
Sep 9, 2013
I cannot save images from Photoshop CC as a dialogue box opens with "cannot save image.....as you do not have write access
View 2 Replies
View Related
Apr 30, 2013
I have some code (below) that will open my embedded excel spread sheet and it works great.  Now I need the code to save and close the excel file after it’s been open.The embedded excel spreadsheet pushes some stuff the model and does a couple other thing. So all I really need is for the excel file to open, save, and close when the rule is run.Imports Inventor.
OLEDocumentTypeEnumExcelApp = CreateObject("Excel.Application")Dim ExcelFile As ReferencedOLEFileDescriptorExcelFile
=hisDoc.Document.ReferencedOLEFileDescriptors.Item(1)ExcelFile.Activate(kEditOpenOLEVerb, ExcelApp)
View 4 Replies
View Related
May 8, 2012
my default process is Adobe RGB. If I save a RAW image (Nikon D200) as a jpeg after adjustments in PS5.5, and I uncheck the "save as Adobe RGB" box, will the image be saved as an sRGB jpeg?
View 4 Replies
View Related
Aug 24, 2013
I recently saved an image on Photoshop CS6 as a PNG file so I could send it as an attachment to a client (who uses a Windows computer). They told me the file wouldn't open and instead showed as an "Unknown File".
Â
I tried opening the file on my Windows computer, as well as a JPEG version to test out, but both came up as "Unknown Files".
Â
The only way I could transfer the files I saved in Photoshop was to export them as PNG through the 'Preview' application.
Â
Is there a reason why these normal formats won't open properly?
View 3 Replies
View Related
May 26, 2010
how to make a routine for zoom extents, save all, and close all open drawings in a single routine?
View 3 Replies
View Related
Jul 1, 2012
When saving images in CS6 I can see them as preview icons of the image in finder by itself, but if I open a file in photoshop to find an image, i only have titles and not the images. ALSO when I go to upload an image to blog or facebook, again I have no image icon of what is there, only a blank space and a file name. I HATE THIS as it makes it takes too much time to figure out where the picture is. I am a graphic artist and a painter and I cannot work like this. Does not matter what type of file.. tiff, png, jpg etc... there is no image to see when opening through photoshop or any upload situation. I am able to see the images from FINDER by itself or if I am placing them into MUSE or INDESIGN.Â
Â
Why I cannot see them to load on blogger or facebook or to open them in photoshop.
Â
Mac OS X lion 10.7.4  NVIDIA GEforce 7300 GI 256 MB    2x2.66 GHx Daul Core Intel xcon  10 GB 667 mhz ddr2 fbdimm
View 3 Replies
View Related
Apr 4, 2013
Images opening from LR to PS6 are opened as CR2 files (canon) and then saved in PS - the resulting saved images are PSD files. These files are not added to the LR catalog without re-importing them. This behavior is different than it was in CS5 - in CS5 they are opened as PSD and immediately added to the LR catalog. I want the same bahavior in CS6. In LR I have set preferences to open files as PSD but they are not PSD until they are saved in PS.
View 9 Replies
View Related
