AutoCAD Inventor :: Macro Resets Displayed Names In The Browser
May 16, 2013
We have the following problem (on AIS2010): we often recycle existing designs with small changes/adapting, means: the (sub)assembly is saved with a new name and part number, and the subcomponents that need to be changed, get a new part number and file name too. So we save a copy, save the parts need changes and then replace the "old" parts in the new assy.
Doing so unfortunately retains the "name" of the component in the model browser tree. Why is that in the first place.
But I'm trying to write a macro that resets the dspalyed names in the browser.
What I found so far, is that under BrowserNodeDefinition, there's a Label property which contains the displayed name, and this does not get changed when the part is replaced. So I thought, I can just compare these BrowserNodeDefinition.Labels with the actual file names and forge a new Label from the new name and the sequence number, however, the BrowserNodeDefinition object is read only, can't be changed.
I haven't found anything else that would contain this name that is displayed in the browser.
View 8 Replies
ADVERTISEMENT
Jan 26, 2012
We are having an issue when we replace a component in Inventor Pro 2012. When we replace a component, the name in the browser does not update to the new component. We've even tried to close and re-open the Inventor assembly and that does not work. We end up manual double clicking the name in the browser and type in the new component name.
Inventor Product Design Suite Ultimate 2012
Dell Precision T7500 Workstation
Xeon Processor
16 GB of RAM
Nvidia Quadro FX 5800
Windows 7 x64
View 4 Replies
View Related
Jul 26, 2012
Thumbnail icons ( iDrop) not displayed within content browser catalog, why is this?
View 1 Replies
View Related
Oct 29, 2012
I opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies
View Related
Apr 8, 2013
I am trying to use the Browsernode.addchild method to add an occurence to an empty browser folder. The code fails at this point and I gett an error pointing to the line "Call oTargetNode.AddChild(oSourceNodeDef)". I can add the occurence with the browserpanes.Reorder method without issue if the folder is not empty. The code is pasted Below.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 29338 StartFragment: 314 EndFragment: 29306 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimPrcsTpAsStringPrcsTp=InputListBox("Process Type?", MultiValue.List("ProcessType"), Parameter("ProcessType"), Title :="Select Process Type", ListName :="Process Type")DimRtgNameAsStringRtgName=PrcsTp&"-"&Parameter("NoRtgsInc")+1MessageBox.Show(RtgName, "Title",MessageBoxButtons.OKCancel)DimoAsmAsAssemblyDocument=ThisDoc.DocumentDimoMatrixAsMatrix=ThisApplication.TransientGeometry.CreateMatrixDimoOccAsComponentOccurrenceoOcc=oAsm.ComponentDefinition.Occurrences.AddVirtual(RtgName, oMatrix)DimoCompDefVirtualAsVirtualComponentDefinition=oOcc.Definition'CREATE AND SET THE
[code]....
View 1 Replies
View Related
Nov 7, 2011
When I press F1 Inventor opens the help on my default browser (Chrome), but when I click the bynocular it uses Internet Explorer.
Is it possible to force Inventor to use a browser of my choice or the default browser?
View 1 Replies
View Related
Dec 30, 2012
I have been using the addin "Save Run Macro" to automatically run a macro every time the "Save" button is pressed.
Any of the following questions about "Save Run Macro"?
1] When I protect the macro from viewing (so I can protect my code) "Save Run Macro" does not see the macro.
2] When I save the part for the first time (ipt, iam or idw/dwg) the macro does not run. I always need to run the macro again.
View 1 Replies
View Related
Jun 5, 2013
I am able to customize my quick access toolbar in Inventor 2014; however, when I close Inventor and re-open it again the quick access toolbar has been reset to what it was before. For example I will add "open from vault" and/or "iProperties" options to the QA toolbar but when I re-open Inventor I have to add them all over again.
View 1 Replies
View Related
Feb 21, 2013
I'm having troubles with the inventor 2013 shortcuts.
Actually, i have to confirm my selection when i have 2 aliases starting with the same key (for example : D for dimension, and DF for discussion forums).
The fact is i never use the DF shortcut, and want to clean it up, or at least change it. When i do, it works well, until i restart inventor.
When i restart Inventor, shortcuts configuration resets and i have to do the change again.
I found a way to not spend that much time on changing them, with exporting/importing settings, but it's still annoying to import every time i start Inventor.
Dell precision M6600
Quadro 3000M
Windows 7 64 bits
French version of Inventor
intel i7
View 4 Replies
View Related
Nov 28, 2011
I'm in the process of creating 3D points (as an overlay) on some laser scanned data (using RiScan, it's just 3d dimensional data, with a northing, easting and RL) and unfortunately the only export option is to export to .dxf... Which is fine but when I export, the information has the point ID as the layer name.
I am aiming at getting this data into another program to analyse and it needs the point ID or name to be my annotation, as opposed to the layer.
So what I need is a way of converting the names of each individual points layer, to the point ID.
View 4 Replies
View Related
Oct 11, 2012
Inventor is displaying the "male symbol" instead of a carriage return. It only does this once in a while, maybe once in 50 dimension edits, and if I edit the dimension again, backspace out the return and replace it then it will display correctly.
I'm using a Quadro 600 with an AutoDesk certified driver. Memory isn't pegged, only using half of my installed 8GB. Bug?
View 8 Replies
View Related
Mar 16, 2012
In one of the columns, for different parts I have value *Varies* displayed instead of iproperty value that other parts display. Why?
View 3 Replies
View Related
Oct 17, 2011
I have installed Autodesk in a new computer but for some reason when I access to the program, "History tree" is not showed by default.
I have tried a lot selecting options in "tools" and "preferences" but I can't locate where the option for displaying "history tree" is located.
View 1 Replies
View Related
Dec 11, 2012
See the jpeg: 1.345 is a regular dimension, .875 is a hole note. The hole note is wrong.
(the part doesn’t have to be scrapped. It can be dis assembled, sent back for rework, refinished and reassembled.)
View 9 Replies
View Related
Jul 20, 2012
I wish to find out why Inventor 2012 simply refuses to display that main edge tha's on top..
View 1 Replies
View Related
Jan 10, 2014
I have attached a screen shot. I created this base plate as A572-50 steel and it is displayed as galvanized. The only thing on this assembly that is from the content center are the bolted connections and a few pieces of A53 pipe that is not shown in the image. All of the other parts and sub- assembly's and their parts are created with their appropriate grade of steel and also displayed as Galvanized. When they are place into the same assembly their materials and display are exactly like they are on the part level itself.
When I place the base plate from my project the initial preview of the the part shows it to be as it is in the part itself, A572-50 and galvanized. The problem comes when you actually drop it in the assembly. The material of the part is reverted to the Steel, Galvanized and is displayed as Generic. This causes a problem in my BOM and then some.
View 1 Replies
View Related
Feb 3, 2012
Looking at using ilogic to display and populate a custom field of available finishes for my products.. I'm using the InputListBox message box and its working BUT I would like to know how to make the actual list box larger (wider to be exact).
sadly running 2014 Product Design Suite Ultimate
Windows 7 64 bit
90G OCZ SATA 3 SSD (My SSD is faster than your HDD)
Core I7 920 processor, ATI HD6970 graphics card, 12G Corsair RAM
View 2 Replies
View Related
Apr 22, 2013
I have Inventor 2012. When I open a file of a part or assembly that had been modeled the piece is displayed not centered nor fully visible. I have changed the document settings for modeled part to make the displayed area larger that the default 3.937" wide x 1.969" high which sort of works sometimes.
The model Origin seems to be centered while the modeled part is displayed off the screen. Is there a setting to have the model file open with the geometry extents displayed and centered? The thumbnail for the file looks correct. It seems like the template files would control this feature.
View 8 Replies
View Related
Apr 12, 2013
With the new install of 2013, the stress contours are not displayed on the part. The part is blank, but the scale is displayed. Settings in Display Contour Shading or Stress Anylisis Settings have no effect. see attached screen plot.
View 4 Replies
View Related
Apr 16, 2012
1. I have a centrifugal pump assembly in which the color is Blue.How can i save the same Pump which can be available with 5 different colors.other then the Blue.This would save me changing the color of the parts in the assembly everytime i want the Pump to display a different color
2. Part-0 attached. Can the chrome color be displayed without the reflections?
ver.2012
View 6 Replies
View Related
Jun 20, 2011
Recently we have switched from VBA to iLogic code. We have stripped out all of the VBA code, but when parts and assemblies are opening there is a big delay and the words "Loading VBA Project" is displayed at the bottom of Inventor.
Is iLogic or some facet of Inventor 2012 still using VBA Projects? If not, then can I disable this to shorten the amount of time it takes to open models? If possible how would I do this?
Using Inventor 2013
View 5 Replies
View Related
Sep 27, 2011
I am trying to add some text to the face of the part, no issues other than the projected edges are displayed as well, can the projected stuff be hidden?
View 1 Replies
View Related
Nov 29, 2012
Yesterday I tried to make a table-driven I-feature of a few drilling paterns.
I want to use this for drawing steel manifolds. The I-feature is used to insert standard drilling paterns, for example a patern to fit a standard flange.
The only problem is, for the thread I used the thread feature, otherwise it doesn't show up in the I-feature.
But when I make a drawing of a part were this I-feature is used, the specification of the thread doesn't show up when I create a hole table, because in the I-feature, the thread is a separate feature.
View 1 Replies
View Related
Jul 23, 2013
I would like to change the way a linetype appears for a specific part, globally throughout my drawing package. How is this done?
I am currently selecting the part in the model tree in the browser and changing it that way, but I have to do it on multiple views, for multiple pages .
View 2 Replies
View Related
Nov 13, 2013
After I create a wire it will not be displayed as a rendered wire. There is no indication of error in the wire (to sharp angle) and this is also happens for a straight wires with no turns.
I have made multiple revisions of an assembly and in older reviosions I can make the wires and they are shown as rendered. But in the latest revision it is not possible. In a older revision I had a harness assembly than deleted it could this have any affect?
Also is there any setting that hides rendered wires that I might have turned on accidently?I have a student licence and the assembly has about 700 parts if that makes any difference.
View 4 Replies
View Related
Dec 5, 2011
Is there a way to accomplish this without editing styles, and changing names in Content Center?
For example, I like my drawings to show STEEL, MILD instead of Steel, Mild in the BOM. Is there an option I can set to make all materials and Content Center parts' names capitals? I think one should perhaps be given this option during installation...?
View 2 Replies
View Related
Aug 27, 2012
I'm trying to get the filenames of some drawings in a folder. I've got the following code, but it's not working. I get a file count from the line "filecount = objFiles.Count", so it's recognizing "objFiles" as the collection of files in the folder, but everything after that simply does nothing. Oddly, I can change the "If" statement from "<>" to "=", and it still reads the "Then" statement in both cases. However, the FileName is blank.
Dim objFile As FileDialogs
Set objFile = New FileDialogs
objFile.Title = strFolderName
objFile.StartInDir = "C:Documents and Settings"
strFolderName = objFile.ShowOpen
[Code] ...........
View 6 Replies
View Related
May 29, 2013
When you place a part (let’s say structural steel part) from content center as a custom part and later change the part size, the browser still shows the old part name which makes it very confusing when scanning through the browsers when you're trying to find something. It makes it almost unusable if you can’t trust the description. How do others handle this? I know about browser rename but that won't work because it defaults back when you close and reopen.
View 4 Replies
View Related
Nov 1, 2013
I am getting the i symbol in front of my 3D sketch in the browser bar. Unlike a 2D sketch which I can open and run sketch doctor, I am unsure how to resolve issues with this sketch.
View 1 Replies
View Related
Nov 15, 2012
I have many symbols next to the bolted connections in my browser in Inventor 2013 which I do not see changing. what these stmbols mean and why there are there ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 4 Replies
View Related
Aug 4, 2013
it is possible to change the Authority name in Project tab under iProperites? I do not want to add a custom field though. We are using the Authority as a quantity field to over ride the drawings quantity.
View 1 Replies
View Related