AutoCAD Inventor :: Wires Are Not Displayed As Rendered After Created With Harness And Wire

Nov 13, 2013

After I create a wire it will not be displayed as a rendered wire. There is no indication of error in the wire (to sharp angle) and this is also happens for a straight wires with no turns.

I have made multiple revisions of an assembly and in older reviosions I can make the wires and they are shown as rendered. But in the latest revision it is not possible. In a older revision I had a harness assembly than deleted it could this have any affect?

Also is there any setting that hides rendered wires that I might have turned on accidently?I have a student licence and the assembly has about 700 parts if that makes any difference.

View 4 Replies


ADVERTISEMENT

AutoCAD Inventor :: Electrical Harness Wires Missing?

Oct 7, 2013

why some of the wires are not showing up in my idw? The segments are there but the wires are a "no show"..

View 1 Replies View Related

AutoCAD Inventor :: Cable And Harness - Root Multiple Wires Along Same Path

Jul 30, 2013

Is there a relatively easy way to root multiple wires along the same path, with a predefined distance between them so there's no interference between them? Something similar to the attached picture... or packed even closer together.

I got in a hole lot of trouble to get the result from the picture and I was hoping that there is an easier way... a workaround... something.

Using segments is not an option (only maybe as an intermediary step) but in the end I have to have all the wires as separate entities.

View 4 Replies View Related

AutoCAD Inventor :: Cable Harness Rendered View

Nov 5, 2013

I have a bit of problem that've been cracking my head. I create a wires, segments using cable harness environments in Inventor. After I created those, I want to see rendered image, but only centerlines appears. I have already change the harness settings into real image(rendered) but still centerlines appears. 

Weird thing is that I create other assembly, it all works perfectly. But I cannot recreate my design, it is already so much work.

View 8 Replies View Related

AutoCAD Inventor :: Wire Wrapped Around Wire On A Pole?

Sep 19, 2013

how to mesh wire together in a pattern on a pole of say 60mm diameter and 1 metre length?

View 9 Replies View Related

AutoCad :: Draw Intersection Wire Like Half Circle Passing Over Other Wire?

Sep 7, 2011

how to draw the intersection wire like a half circle passing over the other wire.

View 9 Replies View Related

AutoCAD Inventor :: Printing White Wires

May 19, 2009

I am working in Inventor Professional 2008, using the harness package. I have a few white wires in the model I am trying to print off as a nailboard and in a routing diagram. The problem is simply that white wires do not print well on white paper. I can print pdfs using "print all colors as black" but then all greyed out components print poorly.Is there a way to print an outline on these wires, for example?

View 1 Replies View Related

AutoCAD Inventor :: Overlay Wires Texture

Aug 31, 2012

where i could find an overlay texture to imitate wires.Want to apply to a solid so as to give the appearance of "electrical windings".

View 2 Replies View Related

AutoCAD Inventor :: Making Electrical Wires Between Connectors?

Oct 2, 2013

I have 2 pipes with connectors on each end...How do i make a realistic shape wire to go from each connector....there will be a wire between a connector on 1 end of the pipe and it goes to a connector on the end of the other pipe....would this be constructed in the assembly and saved as a part to a folder....also can the wire be made as a part and then placed in the assembly...no pipe and run as would prefer to either make as a part or create in the assembly and save as a part

View 3 Replies View Related

AutoCAD Inventor :: How To Create FLEXIBLE (Rope / Cable / Wires)

Nov 30, 2011

I am trying to create a FLEXIBLE object (like rope/cable). Diameter = 10mm, Length = 3m.How do I do it?

View 3 Replies View Related

AutoCAD Inventor :: Cable Harness Renders

Feb 20, 2012

I have these cable segments in my models. The problem I have is that when I render them or zoom out all of the work points and segment points become visible. It's only when zoomed in that they disappear.Look at the attached images for an example.I would really like my rendered videos to not have bright yellow spots.

View 2 Replies View Related

AutoCAD Inventor :: Cable And Harness Tab Missing?

Jan 30, 2012

I might be going mad but I seem to be missing Cable+Harness tab from the ribbon!!! Pipe+tube is there! but I seem to have lost the ability to do cable

View 1 Replies View Related

AutoCAD Inventor :: Editing Harness Properties?

Aug 29, 2006

Is it possible to edit harness properties, for instance, RefDes, of electrical components via API? We need it for integration of Inventor Professional with local ECAD software.

View 4 Replies View Related

AutoCAD Inventor :: Placing A Label On Harness

Nov 15, 2011

How to place a label on a harness.

i have created a label in library, modified and saved.  WHERE IS THE BUTTON TO INSERT????

Maybe i have this mixed up.  Are we talking about a virtual label or a real label (textbox describing label)?

I would like to add a 1-12" plastic covered adhesive label at each connector to identify the connector. Usually we place a text box with an identifier and a table with the label data on the drawing.

This is what i am trying to do. Is this not right?  Is this the nailboard label that inventor is talking about or am i out to lunch?

Windows 7 64 bit
Inventor 2012 Professional
Dell T1600 CPU E31245 @ 3.30GHz
8 GB RAM

View 4 Replies View Related

AutoCAD Inventor :: Add Mass Of Wires And Cables To Assembly (C&H Library Objects)

Dec 6, 2013

Seems like Inventor ignores wires and cables when calculating mass of the whole assy.

View 1 Replies View Related

AutoCAD Inventor :: Cable Harness In Drawing Will Not Hide

Dec 19, 2011

I have created a cable/harness in my assembly.  I have to edit the cable to change visability to centerline display in order to turn off visibility in a drawing view. The issue is that on one sheet of my drawing I need to show the cable, but not on the others. As soon as I turn the rendered display on, the cable shows up on all sheets and the visiblity command has no affect. Is there a hotfix for this? I don't remember a problem like this in 2011.

View 2 Replies View Related

AutoCAD Inventor :: Cable And Harness Length Control

Jan 17, 2013

I'm creating a wire assembly and i already have in me a length for my wire.

How can I apply this in my assembly for Inventor? It seems only the diameter can be specified but not the length.

View 3 Replies View Related

AutoCAD Inventor :: 2010 Harness Visibility Won't Turn Off In DWG

Aug 29, 2011

In Inventor dwgs when I turn the visibility of the harness assembly off (the icon turns gray) the harness still remains visible in the View on the dwg. My co-worker is having the same problem. This is happening on several different inventor dwgs where the harness is not visible (the visibility is turned off) but once an edit is made to the assembly (such as making a part visible) the harness becomes visible even the the visibility is turned off in that View. I don't know if this is related to the recent installation of service pack 4 for inventor 2010 as this problem recently began occurring.

View 2 Replies View Related

AutoCAD Inventor :: Cable And Harness - Virtual Parts In BOM

Jul 19, 2013

I would like to include Terminals and other virtual parts in het BOM on my drawing. For this I need to generate a report. I have defined my own virtual parts but somhow their properties are not accessible. You can see 88 items but this is the total of all segements and pins. Somehow partnumbers show as "---". I have included the report configuration file I am using.

View 2 Replies View Related

AutoCAD Inventor :: Can't Write To Cable And Harness Library

Nov 26, 2013

When I try to create a custom ribbon cable I get a message that reads:

"The cable and harness library is being edited by another user or is marked as read only. The Cable and Harness Library will be opened in read-only mode. No changes can be made to the cable and harness library, but wires and cables can still be inserted into the harness assembly."

In my project file I made "use style library" to = Read-Write

System Specs:

Windows 7 Pro
Autodesk Product Design Suite Ultimate 2014
Autodesk Vault Basic 2014

View 1 Replies View Related

AutoCAD Inventor :: Cable And Harness / Virtual Parts

Apr 18, 2012

How do I ad my own terminals, seals etc. under Connecter Pin Propertiesvirtual parts, and how do get this information on the nailboard.

Alternatively, I would to put this information(seals and terminals that are to be used with the connector) directly on the connector that i publish to content center, some sort of property/text, that I can retrieve on the drawing/nailboard.

View 1 Replies View Related

AutoCAD Inventor :: Cable And Harness Color Change?

Sep 16, 2011

I am working on a model that uses a few lanyards to attach some pins to a plate.  For the cable in the lanyard I used the cable and harness to create an assembly from segments.  I just now need to know how to change the color of the wire from blue to green and also how to remove the yellow outline.  I want to use the images in a manual so I want them to look correct.

View 9 Replies View Related

AutoCAD Inventor :: Link IProperties To Harness Properties

Aug 29, 2013

I am looking for a way to link custom harness properties to equal i-properties for an electrical connector, My end result is I would like the Cable and Harness report generator  gather "description"  but I will not recognized the i-property " description" but if I create a custom harness property "description" it will report that.  I would like the custom harness property to equal the i-property of the part, or am I going about this the wrong way?

View 1 Replies View Related

AutoCAD Inventor :: Importing Solidworks 2011 STEP With Only Construction Group Wires

Jan 10, 2013

import this Solidworks 2011.STEP. Can turn this .STEP into a usable inventor part?

I'm using Inventor PRO 2012 64-bit.

View 1 Replies View Related

AutoCAD Inventor :: Cable And Harness Center Lines Not Visible

Dec 31, 2011

I have an assembly that I want to put some wires in, but every time I create a wire between pins, or a segment, or anything through the Cable and Harness tool, the centerlines don't show up. The rendered wires can appear, but without any sort of way to get at the centerline, I can't set its path or anything like that.

I was wiring up components no problem in a sub assembly, but for some reason it just won't work in my top level assembly. I thought it might be a problem with how I added pins to the components, but even trying to create a wire between 2 connectors from the content center gave the exact same results.

View 3 Replies View Related

AutoCAD Inventor :: Harness Segment Sweep Operation Failed?

Jan 19, 2012

I am using Cable and Harness (Autodesk Inventor 2012 64 bit on Win7 64bit) and when trying to create the segment I only get the error message "The sweep operation failed for the harness segment Segment1 Adjust the segment geometry and try again". It does not matter what data for diameter and bend radius I am using under "Harness properties", it never works. When checking the "Bend radius" for violation it says nothing. I am attaching the files.

View 2 Replies View Related

AutoCAD Inventor :: Unable To Find Cable And Harness Template

Apr 20, 2013

I have a client that is trying to use the Cable and Harness feature, but receives the following error:

"The Cable & Harness template was not found. The specified location for the project is:
[C:Workspace|Design DataCable & Harness|en-US]
Please verify that the template file exists.

He has Inventor installed on his D drive, along with most of his other programs. OS, etc are on the C drive. I have verified that he has harness.iam and a Cable&HarnessDefaultLibrary.iwl in the following location for Inventor 2013

C:UsersPublicPublic DocumentsAutodeskInventor 2013Design DataCable & Harnessen-US. As a stab in the dark, I had him copy those files over to his workspace, and re-start Inventor, but same result. Latest updates are installed.

View 2 Replies View Related

AutoCAD Inventor :: Check Space Available In Segment In Cable And Harness

Aug 12, 2013

Am looking for the feasibility to check space available in Segment.I've assigned a segment diameter as 2 mm, and i have 2 wires have .9 mm dia each, Now i want to know what will be the remaining space available in the segment.

in another way around, if am adding more wires in the segment will inventor give any error message stating that there is no space for route more wires in that segment,

View 2 Replies View Related

AutoCAD Inventor :: Unable To Generate Report Cable / Harness

Mar 22, 2013

When I try the generate a report within Cable & Harness the button stays depressed and no window pops up.  I have tried to generate the report on 2 other stations with the same result.   

View 3 Replies View Related

AutoCAD Inventor :: Building Suite Ultimate 2013 - Harness Capabilities

Jul 11, 2012

I have recently upgraded my system from a Stand-Alone version of 2009 Professional to the Building Suite Ultimate 2013 Licensed Version from my office.  I am looking for the ability to use the Harness tools.  Can't find them, is this option is available in Inventor. 

View 2 Replies View Related

AutoCAD Inventor :: How To Set Wire Direction At Pin

Oct 5, 2011

is it possible to define a 'natural direction' at a pin, in which a wire should start when connected to that pin? This would seem to be natural for me.

As the attached picture shows, my wire is connected at this pin in a weird direction (because I need to route it through the indicated segment).

What is the best strategy to do it correctly?

Another question: I increased the diameter of the segment, hoping that it means that the wires are constrained within the segment, but are free to move withini this. But they all seem to be constrained to the centerline. What I want is that all my wires pass within this 'tube' of 30mm diameter.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved