AutoCAD Civil 3D :: How To Make Labels In Plan To Show Names Of Region
Oct 6, 2013I need to make labels in plan to show the names of the region I make in corridor.
View 3 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Alignment Superelevation Labels In Plan View
Dec 30, 2013Is there a way of adding superelvation data such as full superelevation cross slope to an alignment curve label in plan view?
In my case we add a label for each horizontal curve with critical curve data such as PI Station, Delta, Degree of Curve, etc... but I can't seem to find a way of adding any superelvation information to the plan view as a label. Ideally I would like to be able to add the maximum cross slope value and superelevation critical stations to the label.
There is a way of adding the superelevation critical stations a labels to the alignment similar to how PC's or PT's are labeled, but it does not give the cross slope value.
AutoCAD Civil 3D :: Plan Production - Pipe Network Profile Labels Are Missing In Sheets
May 6, 2012In plan production, I have created the sheets (plan & profile) as a seperate drawing.
when I open the sheets, the pipe network profile labels are missing in model & paper space. (attachment 01)
I tried to on/off the annotation visibility tabs in the lower right corner (attachement 03)
Note: While creating the sheets, I select the tabs for pipe network & copy pipe network labels to destination drawings (attachment 02).
AutoCAD Civil 3D :: Show Earthwork - EG And FG On Plan And Table
Dec 5, 2013I need to show earthwork (+ or -), EG and FG on a grid. cogo points do not seem to have reference text functionality. surface labels seems to be able to do it, but cannot give me a table.
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
AutoCAD Civil 3D :: Can't Get Point Labels To Show Up
Jun 11, 2012I cannot get the point labels (Point #, Elevation and description) to show up beside my point markers. Looks like those labels are set to "true". Got to get my drawing to engineer in next day and he needs to see the shots.
I have attached my dwg that I have already inserted the points to. Kind of new to importing points to CIVIL 3D I have been pulling topo from contour lines in the past.
AutoCAD Civil 3D :: How To Make Skewed Corridor Region For Bridge Project
Sep 24, 2012I'm trying to figure out how to make a skewed corridor region for a bridge project (just one assembly I need to skew) the rest of the corridor is split into regions, the approach slabs and bridge deck assemblies are at about a 30 degree angle to the alignment.
View 5 Replies View RelatedAutoCAD Civil 3D :: Corridor Style-getting Points To Show In Plan View?
Dec 31, 2013I'm not too familiar with corridor styles. How can get points to show on my cooridor in plan view?
View 4 Replies View RelatedAutoCAD Civil 3D :: Imported Shapeline - Show ESRI Labels
Dec 11, 2013I'm running AutoCad 2012 Civil 3D and I've imported a shapefile and would like to show the ESRI labels in AutoCad. The shapefile is a maze of pipelines in an oil field and the owners and sizes of the lines are in my GIS table.
View 1 Replies View RelatedAutoCAD Civil 3D :: Point / Label Styles To Show Trees On Survey Plan
Apr 20, 2013I am trying to set-up point and point label styles to show trees on a survey plan. The point styles is set with a block, and a label is a regular label style that shows a point number and elevation. The problem comes when the label is positioned outside of the block that represents the point. What I need is sort of fixed offset from the center of the point.
View 9 Replies View RelatedAutoCAD Civil 3D :: How To Show 1500 Feet Of Stationing In Plan And Profile Sheet
Feb 21, 2013When I run my production sheets I'm only seeing 1300 feet of my profile and I like to see 1500 feet of my profile at 50 scale. Is there a way to show 1500 feet of profile?
View 9 Replies View RelatedAutoCAD Civil 3D :: Show Inside Diameter Of Structure In Plan And Profile View?
Jul 9, 2013how to show the inside diameter of structure in plan and profile view. Do I have to make sump and wall thicknesses 0 to do so?
View 5 Replies View RelatedAutoCAD Civil 3D :: How To Make Contour Labels Visible
Jan 7, 2013I am trying to make my contour labels visible, indepently of the Visible status of the contours in the surface style of the original surface that I am working on. I have to do this due the final topo looks strange in the borders so I am displaying another contours -that do not have elevation- and make look the drawing better. The problem is that if I turn off the Visible property of the contours, the labels turn off even that they were created in a different layer and attached to a label style with its own layer property.
View 6 Replies View RelatedAutoCAD Civil 3D :: How To Make A Label In Plan With Sections Slopes From Corridor
Jan 18, 2013I saw on you tube channel [URL].........
How to make this label where I can show the design slope in plan.
Revit :: Add Color Region To Family In Plan View
Nov 28, 2011Is it possible to add a color region to a family in plan view? I need to add a color region to the plan view of a single flush door family for training purposes (several co-workers see color filled areas better than black and white single lines with the projector we have). I would like to add a color region to the door and frame in plan view of the door family.
View 1 Replies View RelatedRevit :: Plan Region Cut Plane Is Set To Lower Level
Jan 19, 2012I am using Revit Architecture 2012 and I am having some issues with plan regions. I am not able to get my stairs to show up sometimes and I cannot figure out why. I have attached 2 images of my drawing to show the issue. The 2 floors in this image are a basement and lower level. I am on the basement level and the plan region cut plane is set to lower level and it is cut @ 4'. The top is lower level @ 7'-6" and the bottom and view depth are on basement @0'-0". If I turn the underlay on to show the lower level the stairs show up.
View 9 Replies View RelatedAutoCAD Civil 3D :: Background Masks For Line Labels / How To Make Them Visible
Apr 13, 2012I have some Line Labels that got exploded, and they contained Background Masks.
When I make a plot, the mask plots a dark rectangle.
How can I make the masks visible so that they can be erased? Is there a variable for that? What type of entity (name?)are they?
When I make "wipeouts" visible, you still can not see the masks.
C3d 2010 (no SP)
Win7
AutoCad 2D :: How To Create Attribute - Drawing Floor Plan With Different Room Names
Jan 2, 2012I know how to create a block and all that is fine, but looking for detailed simple lesson on how to create a Attribute. ( I guess thats what they are called). For instance, drawing a floor plan with different room names and etc, I know there is a way to make a circle or polygon, or square and then when it is inserted in the drawing, you just have to type the new name of the room, or the window symbol, or door number and etc.
By the way, I am using a student version of AutoCAD 2010. Also, if you could also add the keyboard shortcut alias's too would be a great deal.
AutoCAD Civil 3D :: Make Sure Annotated Surface Labels Spot Elevations From 3D Design Drawing
Dec 19, 2013How can I make sure the annotated surface labels spot elevations from my 3d design drawing which is being xrefed into a new Precise Grading Breakout Sheet plots screened?
The Label Style which I created for the annotated surface label spot elevations has all its properties set to be ByLayer for example its color and lineweight. The Layer I assigned the Label Style was assigned to a layer with a color and plot style that should plot any object screened. Color 8 and Plot Style Screened.
What other steps am I missing to assure myself that this Label Style will plot screened in my new Precise Grading Breakout Sheet?
I also made sure that the xref drawing in which this Surface spot elevation has the correct colors and lineweights and Plot Styles in my new Precise Grading Breakout Sheet.
AutoCAD Civil 3D :: Surface Slope Labels - Rise:Run Custom Labels?
Dec 27, 2013I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
AutoCAD Civil 3D :: Why Does Not Consider Curve Labels As A Part Of Alignment Labels
May 3, 2013I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
Revit :: Embedded Labels Into Families - Only Shown On Plan Views
Jul 10, 2013I embedded a label (Generic Annotation) into some families that is only shown on plan views. Is there any Label that can be shown in the Room elevation views. I attached a simple familie with a label.
View 1 Replies View RelatedRevit :: Masking Region Not Working When Show Link File?
Apr 26, 2013Why masking region and filled region not working (bicome)transparent when I attach link file. If I hide the link file ,maskin region and filled region works fine. Visual style is hidden line.
View 4 Replies View RelatedAutoCad :: How To Make Drawing As Region That Cover Close Area
Aug 1, 2013How to make my drawing as region that cover the close area. When i select the circle object and tooth object, it not become a region . I already connect all the line but its not working.
View 9 Replies View RelatedRevit :: Draw Filled Region Boundary Lines That Show Up In Any Color?
Jan 23, 2012How to draw filled region boundary lines that show up in any color other than gray? it is hard to distinguish the lines I am drawing from the lines that are already there while creating or modifing a boundary. Can I change the color of the Invisible Line (can't find that line modify)? OR does every line created thru manage line style have to have a weight (am I able to make a zero line weight or even a pattern that shows nothing.
View 1 Replies View RelatedAutoCAD Civil 3D :: Assembly That Make Automatic Berm / Subbasembly Doesn't Show Link Code
Feb 11, 2013I’m creating an assembly that makes an automatic berm when the cut height in not enough, so then I need a berm. The problem is for some reason I can’t get the link code for the assembly.
View 5 Replies View RelatedAutoCAD Inventor :: Show Column Location In A Plan
Sep 14, 2012I need to show column locations in a Plan (overhead) view. The columns are so small that they don't show up very well. Is there an "automagic" (I'd prefer not to have to manually place some kind of sketched symbol on each columns linework) way to do a PART REP (so-called) in a drawing?
I'm using 2012 Premium.
AutoCad :: Show Circulation Patterns On Landscape Plan
Feb 22, 2011If AutoCAD 08 has the ability to create wire frame arrows without building them from scratch? I'm trying to show circulation patterns on a landscape plan. I'd like to be able to click and drag like a polyline etc.
View 9 Replies View RelatedAutoCad 2D :: Show 2 And 5 Gang Light Switch In Electrical Plan?
Jan 16, 2013Objective: to show in an electrical plan view a 2 and 5 gang light switch box.
Problem; I have both a 2 and 5 gang light switch plates in separate locations. I need to show in an electrical plan that there are both a 2 and 5 gang switches in these particular location without crowding the wall with switch symbols.
Photoshop :: Creators Names Doesn't Show Up
Apr 24, 2013I was using photoshop when an error came up about my Nvidia. I didnt read it and i just clicked on OK. Whenever i click on photoshop the blue box thing with all the creators names does not show up. All other adobe products work fine. The version of photoshop i use is CS6.
View 4 Replies View RelatedPhotoshop :: Show Names On Slice On Template?
Nov 9, 2006I Have a Template that im editting and want to save the slices but there is too many slices in the template.
How do I see the names on the slices, so that I can delete the slices that Do Not have names?
This is how I usual export slices, Is there a better way?
In Image Ready
I go File> Save As Optimized As> Save as Type (Images Only) Settings as on Default > And Slices are set to ALL
AutoCAD Civil 3D :: How To Crop A Corridor Region
Jul 31, 2013As you can define a target for a lane width (for example) it would be possible to define a crop or limit? Civil 3D (2013) how much you have to improve....
View 4 Replies View Related