I'm running AutoCad 2012 Civil 3D and I've imported a shapefile and would like to show the ESRI labels in AutoCad. The shapefile is a maze of pipelines in an oil field and the owners and sizes of the lines are in my GIS table.
View 1 RepliesI cannot get the point labels (Point #, Elevation and description) to show up beside my point markers. Looks like those labels are set to "true". Got to get my drawing to engineer in next day and he needs to see the shots.
I have attached my dwg that I have already inserted the points to. Kind of new to importing points to CIVIL 3D I have been pulling topo from contour lines in the past.
I need to make labels in plan to show the names of the region I make in corridor.
View 3 Replies View RelatedIs it possible to export a DTM (TIN surface) to ESRI's ASCII grid format (for ArcGIS)?
I've attached an example file.
Failing that, is it possible to export to a simple XYZ point file?
I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
I have a Civil3D file with Drawing Settings = WGS84 UTM-Zone44 North Map3D coordinate system = WGS84 UTM-Zone44 North a USGS DEM from HYDROsheds data set (tile = N40E80) also note this DEM is a folder of multiple ADF files when using FDO provider the DEM comes in just fine but it lands in the wrong location thousands of kilometers away.
When I load the same shape files into ArcMAP10 with spatial reference as WGS84 UTM-Zone44 North everything lines up perfectly.
The header prj.adf file is this:
PROJECTION GEOGRAPHIC
UNITS DD
DATUM WGS84
PARAMETERS
so how do I make it come into Map3D correctly?
Previously i`m using version 2009 and importing Google earth image and surface works fine. However, recently i tried with version 2010 and i`m having some problem here (imported surface / contour seems ok but the image is too large like 3x or 4x). How to solve that?
View 3 Replies View RelatedI imported some pictures to who knows where?
So where is "show all in catalogue" so i can survey quickly?
Otherwise I'm going to have to go thru every single folder?
i have just started using revit. i imported a 3d dwg file into generic model family and loaded into my project.for some reason, the model shows in section, elevation and last level of my floor plan and site plan as well, but it is not showing in my 1st to 2nd last floor plan. can some people tell what are to possible reason for this?how can i get it show show in the plans?
View 3 Replies View RelatedI'm a hobbyist photographer with lots of personal photos and some I might use for work related projects. I'm just getting started with LR and want to make sure I start right.
1. What metadata fields should I consider using that may be useful in the future? None of my images currently have metadata applied.
2. Will star ratings and labels from Bridge show up in LR?
Am a new user to LR and having a problem when importing .mov files into LR4.2. RAW & JPEG files import fine but the .mov files [from my Oly E-M5] show up as a solid green thumbnail. Imported the latest Quicktime, have a 64bit Vista system. why the .mov files are not importing properly?
View 2 Replies View RelatedI'm working with many geometry like closed polylines, mpolygons and topology; in all cases, exporting to esri shp, 95% of exported geometry has a kickback point (always first and last point).
Doing map clean solve the problem in the dwg file, but the issue come back again when export.
Client is using straight up AutoCAD.
Wants to bring ESRI information into a DWG (actual data not just linework).
I know MAP and C3D does this with no problems and you can go open the file in AutoCAD. Problem is the data is not visible when you open it in AutoCAD. Switch back to C3D or MAP and you can see it again.
Just want to make sure I cover all resources before I tell them it can't be done without scripting something for AutoCAD.
2012 C3D
2012 MEP
I am trying to label my drawing (bearings and distances) and am having a bit of trouble. . First, the precision isn't right. I keep trying to set the precision but whenever I add a parcel label it comes up with the wrong precision. Also, I can't get the scale of the labels right. They are too big and I can't seem to size them down any smaller.
View 2 Replies View RelatedWhen generating a line of contour labels with Contour-Multiple, most of the labels are orientated properly but some of them on the line are rotated 180 degrees. Why aren't they ALL orientated in the same direction?
Also, sometimes, all of them will be orientated in the wrong direction such that they are, essentially, upside down. Is this a bug or is there a setting to adjust?
I am trying to create a label for slope ratios. I want to have the label show only whole numbers if it is a whole number and go to the 10th place only when necessary. Is there a way to use the label editor to do this? I would think it would work something like
IF(<General Segment Grade>=0|1|2|3|4|5|6|7|8|9 then <[General Segment Grade(FRun|P0|RN|AP|GC|UN|SD|OF)]> else <[General Segment Grade(FRun|P1|RN|AP|GC|UN|SD|OF)]>)
but I'm not even sure I'm going in the right direction.
Is there a way to add a field within a label style? I made a custom alignment label and I would like to add a field that references a sheet (I'm using SSM) i.e. "See Sheet 1-2".
View 6 Replies View RelatedI opened a project that i had not been into for a month and for some reason the surface and labels will not rebuild automatically anymore. Surface is set to rebuild automatic and i've gone in and changed the regenauto from on to off to on again, also rebooted the computer with no luck. I have a combination of feature lines and points. If I edit the elevations along the feature line the contours do not rebuild and the label does not change either. If I hover over the elevation node in the feature line it will show the new elevation but the elevation label for that point does not reflect the change, neither do the contours. If it is a point and I change it with the panorama window, the elevation tag will change but the contours do not rebuild until I tell it to rebuild. Any slope labels going to that point do not update with it though.
View 2 Replies View RelatedI need a style for intersection of alignments that automatically includes the abbreviations for Point On Tangent (POT), Point On Curve (POC), etc. I can create a style with the basic information of Station, Alignment Name, but adding the POT, POST, etc. in front of all alignment’s stationing and name doesn't seem available still in Civil 3D 2011.
View 9 Replies View RelatedI worked this out with C3D back in the day but for some reason I can't figure out how to renumber line tag label designations. What's making it tougher is that I need to create the tags in a block and try to create the line table OUTSIDE the block (this is so that I can have the block rotated to a deed bearing with dynamic labels in the block while retaining it's true orientation from state plane coordinates in model space). I have an old lisp file CLEARTAGS.lsp but this is not working. Perhaps this was made for 2010 or earlier. When I save the block, it jumps all the tag numbering way up for some reason.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
I seem to have a random, we'll say error for lack of a better term. I have a set of Point Styles with a Description Key set up for our survey points. When I import the points from a csv, I have 9 points that do not come in with the labels in the right spot. The label is supposed to sit next to the point style (see included image) Instead they sit 1 unit away. If you look at the included image you will see a point called COMH that is inserted correctly. Right above it is a point called WTMH that has the label coming in far to the right of the point style. Both the COMH and the WTMH have the same settings in the description key, and other than the block for the point, the same settings in the Point Style. I have completey re-written the description key, as well as re-created all the point styles, but this keeps happening. I have even re-created the block drawing and redefined the block in the dwt as well as an existing drawing.
P.S. I have added an image of the description key coding as well as the point style for the COMH andthe WTMH.
I am using Civil3D 2012 and have a drawing that will not allow me to add Contour Labels.
Unable to create contour labels
Issue You were unable to create contour labels. When you tried to create a single contour label, you could not select any of the contour lines of a surface. When you tried to create multiple contour labels, the contour label line disappeared after you selected the second point.
I have a directory that contains .dbf, .prj, .sbn, .sbx, .shp & .shx files. How do import or use this data in Autodesk Map?Also, I would like to know about obtaining GIS training.
View 9 Replies View RelatedI've got a drawing that shows the site boundary for a planning application, its just a polyline drawn round xref mapping. A client wants us to export this to a shapefile, or as ESRI format I've heard (its all a bit vague). I believe they want to have it as a Mapinfo layer.
The client has sent through some 'instructions' that are I've never even heard of ESRI format before.
acad c3d 2013
My sag and Crest profile labels disappear when opening the drawing.
On a road project I have an acquisition parcel that is matched across 2 viewports on one layout. I would usually slide the parcel label so it's only visible on one layout. Then I'd add a second label that would be visible on the second layout.
This line happens to cross the viewport near the end. If I add a label in the lower viewport that looks reasonable. It will overlap in to the upper viewport. I can drag the label to very near the end of the line but it doesn't look right there. I don't think it's good procedure to try and force one parcel label on to it's own layer so it can be frozen in that one viewport.
Any technique for handling this situation?
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
My sections are showing a label for some of my links that are coded as "top". My label style for the "top" link is set to none and some of the labels are still displayed.
The labels show in the sections, but not the assembly. We are running Civil 3D 2012.
First - the alignment station label text size when viewed in model space is fine but when viewed in paper space it comes in way to big. How do i adjust this so i see things in paper space as they are in the model?
Second - Would like to adjust the station label style from the defalt 0+00.00 to 0+000.000
Is it possible to create C3D labels that are non-associative? That is, they do not adjust font size, etc., with changes in viewport scale.
C3D 2014
I accidentally deleted the major and minor station labels along my alignment. Is there a way to re-insert them?
View 5 Replies View Related