Am a new user to LR and having a problem when importing .mov files into LR4.2. RAW & JPEG files import fine but the .mov files [from my Oly E-M5] show up as a solid green thumbnail. Imported the latest Quicktime, have a 64bit Vista system. why the .mov files are not importing properly?
View 2 Replies
How to unite the red and green parts of the leaf into one solid green leaf? See attached “Leaf” file. (How do I attach the AI file?)
I tried the Pathfinder UNITE command and the Live Paint MERGE command.
I imported some pictures to who knows where?
So where is "show all in catalogue" so i can survey quickly?
Otherwise I'm going to have to go thru every single folder?
I am very news to photoshop and I am using CS4 and have experienced a problem today that I have not encountered before.l When cropping a picture just a small green box with the normal red outline exists in Navigator howeverf if I click on Histroy the original pictgure will show back up on photoshop.
for the first three weeks I did not have a probloem with this issue, I am trying to get a fell for photoshop and then upgrade to the newest edition.
I am a Silkypixs (SP) user and have a trial copy of Lightroom 3.6. Two questions for this audiance....
1) I have a pentax k5 and it produces AVI files for video. Lightroom cannot open these files in thumbnail and produces an error message that stalls the import process. IP there something that can be done about this? This is a critical issue to me and my impact my final purchase decision.
2) I am not used to using an import process. SP would open the files in the existing drive and then process the files. I would then write to an alternative drive. If I am reading the LR process correctly, I am opening in the existing drive then importing to a designtate drive before processing the raw images. Then I write the resulting images to another drive. If that is the case, I am creating two copies of the image (one raw, one jpeg) on my hard drive. Is that correct?
i am importing my raw files and then there is no thumbnail and no picture at all
View 2 Replies View RelatedWhy can't Windows Explorer show thumbnail previews of DNG's on my Windows 8.1 64bit Pc. I assume is has something to do with not having the DNG codec. However, on Adobe's website it says their DNG codec only works on Windows 7.
View 4 Replies View RelatedThis message comes up when I try to import to light room. A box comes up that says "Import Results" then the error message shows with a group of file numbers that wouldn't import.
View 1 Replies View RelatedI have LR loaded on my MacBook Pro and everything was alright in terms of LR operation. I use a 5D MKII camera and always shoot in RAW (CR2). I always download images from the Card to the HDD and then import it to LR. However, CR2 Raw files are not getting imported and I am getting the following error message - "The files appear to be unsupported or damaged".
I can still import other files like .tiff and .jpg files.
I've just started learning AutoCAD and came across my first obstacle I don't know how to work around. Here's what I'm trying to do.
I draw two lines and two circles and then trim the excessive parts as in the picture (in general it can be an area composed of various types of lines, straight lines, arc, and likely with rounded corners).
Then extrude to the height 2. This makes 4 surfaces (green). Now I build a solid 'around' the surfaces. In this example I draw a rectangle and extrude to the height 1 (red). And my question is: how do I remove the part of the solid that's enclosed within the green surfaces? Subtraction doesn't work as I don't subtract solid. Slicing doesn't work either as it's more than one surfaces. For the same reason I can't turn it into a solid.
acad02.jpg
After importing folders into LR, are there any issues with going into those folders and moving out .png, .gif, .pdf and other files that LR does not import?
View 1 Replies View RelatedAfter I updated to 3.6 I could no longer preview the pictures on the card or camera regardless of the format. Prior to 3.6 I had no problem.. I did not change ,y preferences but I checked them to be sure and can see nothing that deals with this.
View 3 Replies View RelatedI'm now getting the error message: "The following files were not imported because they could not be read (189)." Not sure why this would appear after years of successfully importing.
View 7 Replies View RelatedI recently had a number of old transparencies scanned at a local service bureau and delivered as jpegs on disc. The images import just fine into Lightroom from the disc, but when I try to rename them, I get a dialogue box telling me I can't rename them "...because they are missing or not writable." Thinking, perhaps, that Lightroom was somehow trying unsuccessfully to rename them on the source disc, I tried downloading them to my computer first, ejecting the disc, then importing them into Lightroom. Same result. What am I doing wrong? How do I rename these images?
View 1 Replies View RelatedI have a foler with just over 5065 images that I am trying to import, but when the imprt dialogue window comes up, it only shows 4995. Have tried unchecking the 'dont import duplicates' and have trried multiple times, but for some reason it only registers 4995 images. Where the other 75 could be hiding? all the other folders in the main folder imported fine..
View 9 Replies View RelatedFirst time I have gotten this error while attempting to import.
View 2 Replies View RelatedI'm using LR 4 on a Mac.I've been an LR user for three years.I few days ago I imported 500+ images from a folder in Apple Finder into LR.The import was successful because I deleted a few photos and made adjustments to a few right after finishing the import.
Today I went back into LR to continue working on the remaining images and the folder I imported them into is not visible.When I search using a filename and Find under Library in LR, I'm told that no Photos match.Trying to re-import the images results in a message that the photos are already in LR!
I just installed Lr4 on my laptop. When I plug in my Nikon D7000 and try to import photos, I just get a message "The following files could not be imported because they could not be read". Then it lists the file names of the various files. Message displays regardless if I try .NEF or .JPEG files. The photos appear in the library module, so I know Lr is pulling them from the correct place (camera). When I plug the camera into my desktop PC where I also have Lr installed, all works fine.
View 1 Replies View RelatedLightroom stores all my imported files by date and I cannot get it to recognize them by name.
View 10 Replies View RelatedI must have accidentally ticked something because all of a sudden Lightroom 4.3 has started to import an original filename.tif file and also copy it to filename -2.tif, doubling up each file. What do I have do to change to stop this?
Using a 64bit Windows 7 PC
I have an issue with the fact that i spend time setting up my camera for the rite white balance and exposure to get a quality image that might use some spot removal in post but thats about it, to have the images become dark, dull and lifeless in lightroom when imported. when i try to bring the color back its just not the same. why is this happening and how can i fix it. i am glad that i saved the files elsewhere first, the raw images look fine in other software its just lightroom that is doing this. here is an screen shot of the same image side by side the one on the left is raw exactly how it looks in camera with canon software and the one on the right is in lightroom. at first it looked the same but 2 seconds later it was dull and imo ugly.
View 18 Replies View RelatedIn CS6 I work with .tiff files and then export them to LR4 for editting. When I try to export the files back to CS6 they are converted to .jpeg files. Why?
View 4 Replies View RelatedMy RAW files are imported as Black & White images. Did I click on something by mistake?
View 6 Replies View RelatedI imported many files that were tiff & jpeg pairs (with the import preference box checked 'Do Not treat as seprate files when file names are the same') into LR3. Since then, i have been unable to write new metadata, such as captions, keywords, etc., to both the JPG and Tif files. LR3, and now also LR5 both only seem to want to write to the tiff files. How do i get the metadata easily saved onto the jeg files as well? (preferably without re-importing as separate files).
View 5 Replies View RelatedI am trying to crop and straighten my 35mm slide scans. When I imported the scans the average file size was 5mb but after cropping and straightening the scans in lightroom 5 and exporting them, the average file size was 15mb! There is no increase or decrease in quality.
View 1 Replies View RelatedWhen working in lightroom 3.6 or 4.0 (I have both) use mostly 3.6 if you have finished working with a group of imported files and want to clean up all the libraries in the left column knowing that I would just re-import the photos if I chose to work them again from scratch, HOW DO YOU CLEAN UP the lirary. Most times I work with photos and do not need to save the library or catalog or whatever you call it that stores the settings done to a group of photos imported.
View 6 Replies View Related1. "Failed to find a place for the imported files"
2. "not recognized"
I'm having a problem seeing a file in LR 4.2 when it is in the folder where I want it to be.
I created a composite tiff image from two raw files that reside in two different folders. I had exported the two raw files from LR as tiffs, opened the tiffs in Photoshop CS5, then combined them into a multi-layer tiff to create a 600+MB composite file. That composite was saved in Photoshop under a new file name using "Save As" . I knew the new composite file would not be in the LR catalog until I imported it. When I imported, the image went into a new date-named folder (call it folder "A"). So far, it all made sense to me.
From this point on things got funny. Working within LR, I tried to move the uniquely named composite from folder A into the folder that one of the component files came from (call it folder "B"). The Move failed. Instead, I got an error message saying the file already existed in "B." I could not see the file in "B" using lightroom, but MS Explorer revealed that the file was indeed there. I don't understand how it got there.
Still trying to get my composite in "B" recognized by LR, I first deleted the composite from "B" using explorer, then went into LR and moved the file from "A" (where LR recognized it), into "B". Still no good. LR does not show the file in "B", yet it appears in explorer.
I suppose I could live with this composite file in its own folder, "A," but that is not really where I want it. More importantly, I don't understand why I can't see it in LR in the folder where i want it.
- Is my catalog file damaged?
-Might the XMP files have anything to do with this?
-Is the size of the file (>600MB) a factor?
Win 7, LR 4.2, PS CS5.
Had the operating system of my Macbook cleared, then reinstalled my copy of LR3. After first import from Nikon 7000, received message that raw files of this camera are not compatible with my LR. Puzzling, for I have loaded on this computer with this copy of LR3 from this camera thousands of raw files.
View 3 Replies View RelatedHow do I stop LR4 from organizing imported files into a folder by date. Most times when I import files I have already created a folder and sub-folder structure tyat I want to use. I then right click the desired folder and choose import into this folder option. Why does LR4 insist on organizing my already selected destination into a sub-folder with a date by default?
View 4 Replies View RelatedLR 4.6 shows wrong Date (1988-02-07) and time after importing. Explorer shows the exact date and time of craeting the file. File type is MOV, camera Leica M (240).
View 1 Replies View Related
