Lightroom :: Group Of Imported Files And Want To Clean Up All Libraries
Jul 19, 2013
When working in lightroom 3.6 or 4.0 (I have both) use mostly 3.6 if you have finished working with a group of imported files and want to clean up all the libraries in the left column knowing that I would just re-import the photos if I chose to work them again from scratch, HOW DO YOU CLEAN UP the lirary. Most times I work with photos and do not need to save the library or catalog or whatever you call it that stores the settings done to a group of photos imported.
View 6 Replies
ADVERTISEMENT
Dec 18, 2012
This message comes up when I try to import to light room. A box comes up that says "Import Results" then the error message shows with a group of file numbers that wouldn't import.
View 1 Replies
View Related
Nov 19, 2012
I have LR loaded on my MacBook Pro and everything was alright in terms of LR operation. I use a 5D MKII camera and always shoot in RAW (CR2). I always download images from the Card to the HDD and then import it to LR. However, CR2 Raw files are not getting imported and I am getting the following error message - "The files appear to be unsupported or damaged".
I can still import other files like .tiff and .jpg files.
View 2 Replies
View Related
Jul 11, 2012
After importing folders into LR, are there any issues with going into those folders and moving out .png, .gif, .pdf and other files that LR does not import?
View 1 Replies
View Related
Jun 20, 2012
After I updated to 3.6 I could no longer preview the pictures on the card or camera regardless of the format. Prior to 3.6 I had no problem.. I did not change ,y preferences but I checked them to be sure and can see nothing that deals with this.
View 3 Replies
View Related
Jul 7, 2012
I'm now getting the error message: "The following files were not imported because they could not be read (189)." Not sure why this would appear after years of successfully importing.
View 7 Replies
View Related
Oct 7, 2013
I recently had a number of old transparencies scanned at a local service bureau and delivered as jpegs on disc. The images import just fine into Lightroom from the disc, but when I try to rename them, I get a dialogue box telling me I can't rename them "...because they are missing or not writable." Thinking, perhaps, that Lightroom was somehow trying unsuccessfully to rename them on the source disc, I tried downloading them to my computer first, ejecting the disc, then importing them into Lightroom. Same result. What am I doing wrong? How do I rename these images?
View 1 Replies
View Related
Nov 28, 2011
I have a foler with just over 5065 images that I am trying to import, but when the imprt dialogue window comes up, it only shows 4995. Have tried unchecking the 'dont import duplicates' and have trried multiple times, but for some reason it only registers 4995 images. Where the other 75 could be hiding? all the other folders in the main folder imported fine..
View 9 Replies
View Related
Nov 20, 2011
First time I have gotten this error while attempting to import.
View 2 Replies
View Related
Aug 9, 2012
I'm using LR 4 on a Mac.I've been an LR user for three years.I few days ago I imported 500+ images from a folder in Apple Finder into LR.The import was successful because I deleted a few photos and made adjustments to a few right after finishing the import.
Today I went back into LR to continue working on the remaining images and the folder I imported them into is not visible.When I search using a filename and Find under Library in LR, I'm told that no Photos match.Trying to re-import the images results in a message that the photos are already in LR!
View 1 Replies
View Related
May 20, 2012
I just installed Lr4 on my laptop. When I plug in my Nikon D7000 and try to import photos, I just get a message "The following files could not be imported because they could not be read". Then it lists the file names of the various files. Message displays regardless if I try .NEF or .JPEG files. The photos appear in the library module, so I know Lr is pulling them from the correct place (camera). When I plug the camera into my desktop PC where I also have Lr installed, all works fine.
View 1 Replies
View Related
Jun 4, 2012
Lightroom stores all my imported files by date and I cannot get it to recognize them by name.
View 10 Replies
View Related
Feb 1, 2013
I must have accidentally ticked something because all of a sudden Lightroom 4.3 has started to import an original filename.tif file and also copy it to filename -2.tif, doubling up each file. What do I have do to change to stop this?
Using a 64bit Windows 7 PC
View 4 Replies
View Related
Mar 13, 2014
I have an issue with the fact that i spend time setting up my camera for the rite white balance and exposure to get a quality image that might use some spot removal in post but thats about it, to have the images become dark, dull and lifeless in lightroom when imported. when i try to bring the color back its just not the same. why is this happening and how can i fix it. i am glad that i saved the files elsewhere first, the raw images look fine in other software its just lightroom that is doing this. here is an screen shot of the same image side by side the one on the left is raw exactly how it looks in camera with canon software and the one on the right is in lightroom. at first it looked the same but 2 seconds later it was dull and imo ugly.
View 18 Replies
View Related
Sep 3, 2012
In vbs, I import a illustrator file with this way
Set importedGroup = appRef.ActiveDocument.GroupItems.CreateFromFile(dest)
after i duplicate them
Set dupItem = importedGroup.Duplicate(newGroup, aiPlaceAfter)
but i don't know how to "ungroup" or "unmask" the importedGroup?
I have looking to use clipped but it seems to not working.
View 6 Replies
View Related
Sep 17, 2012
In CS6 I work with .tiff files and then export them to LR4 for editting. When I try to export the files back to CS6 they are converted to .jpeg files. Why?
View 4 Replies
View Related
Feb 11, 2014
My RAW files are imported as Black & White images. Did I click on something by mistake?
View 6 Replies
View Related
Jun 28, 2013
I imported many files that were tiff & jpeg pairs (with the import preference box checked 'Do Not treat as seprate files when file names are the same') into LR3. Since then, i have been unable to write new metadata, such as captions, keywords, etc., to both the JPG and Tif files. LR3, and now also LR5 both only seem to want to write to the tiff files. How do i get the metadata easily saved onto the jeg files as well? (preferably without re-importing as separate files).
View 5 Replies
View Related
Jan 17, 2014
I am trying to crop and straighten my 35mm slide scans. When I imported the scans the average file size was 5mb but after cropping and straightening the scans in lightroom 5 and exporting them, the average file size was 15mb! There is no increase or decrease in quality.
View 1 Replies
View Related
Dec 21, 2012
1. "Failed to find a place for the imported files"
2. "not recognized"
View 2 Replies
View Related
Oct 31, 2012
I am running C3D 2010.
Somewhere along the line, someone in our office made our template import points into separate layers based on the RAW Description. I would like to un-do this. So far, I have deleted every point style & point label style except for 'Basic'. Inside of 'Basic', the layer is 'V-NODE'. However, some of my points are still coming in on layers like: 'V-Site-'(Raw Desc).
I'm about to start from scratch on the template, however, I'd like to avoid that because of the array of styles that are in it.
View 3 Replies
View Related
Feb 15, 2013
I'm having a problem seeing a file in LR 4.2 when it is in the folder where I want it to be.
I created a composite tiff image from two raw files that reside in two different folders. I had exported the two raw files from LR as tiffs, opened the tiffs in Photoshop CS5, then combined them into a multi-layer tiff to create a 600+MB composite file. That composite was saved in Photoshop under a new file name using "Save As" . I knew the new composite file would not be in the LR catalog until I imported it. When I imported, the image went into a new date-named folder (call it folder "A"). So far, it all made sense to me.
From this point on things got funny. Working within LR, I tried to move the uniquely named composite from folder A into the folder that one of the component files came from (call it folder "B"). The Move failed. Instead, I got an error message saying the file already existed in "B." I could not see the file in "B" using lightroom, but MS Explorer revealed that the file was indeed there. I don't understand how it got there.
Still trying to get my composite in "B" recognized by LR, I first deleted the composite from "B" using explorer, then went into LR and moved the file from "A" (where LR recognized it), into "B". Still no good. LR does not show the file in "B", yet it appears in explorer.
I suppose I could live with this composite file in its own folder, "A," but that is not really where I want it. More importantly, I don't understand why I can't see it in LR in the folder where i want it.
- Is my catalog file damaged?
-Might the XMP files have anything to do with this?
-Is the size of the file (>600MB) a factor?
Win 7, LR 4.2, PS CS5.
View 1 Replies
View Related
Aug 16, 2012
Had the operating system of my Macbook cleared, then reinstalled my copy of LR3. After first import from Nikon 7000, received message that raw files of this camera are not compatible with my LR. Puzzling, for I have loaded on this computer with this copy of LR3 from this camera thousands of raw files.
View 3 Replies
View Related
Mar 19, 2013
How do I stop LR4 from organizing imported files into a folder by date. Most times when I import files I have already created a folder and sub-folder structure tyat I want to use. I then right click the desired folder and choose import into this folder option. Why does LR4 insist on organizing my already selected destination into a sub-folder with a date by default?
View 4 Replies
View Related
Oct 21, 2012
Am a new user to LR and having a problem when importing .mov files into LR4.2. RAW & JPEG files import fine but the .mov files [from my Oly E-M5] show up as a solid green thumbnail. Imported the latest Quicktime, have a 64bit Vista system. why the .mov files are not importing properly?
View 2 Replies
View Related
May 20, 2013
LR 4.6 shows wrong Date (1988-02-07) and time after importing. Explorer shows the exact date and time of craeting the file. File type is MOV, camera Leica M (240).
View 1 Replies
View Related
Feb 17, 2014
When attempting to import photos from memory card, I see the preview, however when I select the files to import, I'm getting this message:
The following files were not imported because they could not be read. (221)
Files are in .cr2 format as always...see screenshot...
View 1 Replies
View Related
Oct 19, 2013
I just noticed yesterday that when I have RAW (DNG) files in my LR5.2 library, I can select the correct lens profile to apply. When I take three of those files and merge them together in Photomatix Pro they come back as a single TIFF file. Now LR only has one lens profile available, and it is the wrong one.
This is happening with my Sony NEX-7 and Tamron 18-200mm f/3.5-6.3 XR DI-III VC. With the RAW files, I have a list of Tamron lenses from which to choose, and the correct one is available. For the merged TIFF file, however, only a single Tamron lens is available for selection, and it is not the lens I used.
View 4 Replies
View Related
Jul 1, 2012
Video files from an iPhone 4S (5.1.1) are transferred onto my Mac (this story is true under 10.7.4 and under 10.8) via PhotoSync. In Finder, the files reflect the correct creation date. On importing the files to Aperture, the correct capture time and date is shown in the metadata. On importing the files to Lightroom 4.1, however, the capture time shows as plus-five hours from when actually shot. I can't think of any setting I might have tripped in Lr to cause this to happen on import (I understand how to manually change the capture time).
View 17 Replies
View Related
May 21, 2013
Is there a way to include template files and Custom Style Libraries when creating a Product Design Suite Deployment?
View 3 Replies
View Related
Jun 6, 2012
A new function of LR 4 is to import libraries from Aperture. How does it work? What do I have to do on the Aperture side? The LR side looks easy...
View 9 Replies
View Related
