I’m creating an assembly that makes an automatic berm when the cut height in not enough, so then I need a berm. The problem is for some reason I can’t get the link code for the assembly.
View 5 RepliesI have some code that edits the breaklines of a surface. Everything works correctly, except for the surface rebuild when finished.At the end of the command I use:
surf.Rebuild();
But when the command completes I still need to manually rebuild the surface to see the result of my command's edits. This is in both 2013 & 2014. I shouldn't need to do this and was just wondering why the Rebuild() method doesn't always work.
Also, is it possible to toggle the Automatic Rebuild option for surfaces in code?
it is possible to define point/link codes using some conditional expressions. When I try to write in an expression under "Link Codes" I get an error. Is there a way to create conditional codes without the use of "decisions"?
View 1 Replies View RelatedI have a problem with editing in link code because it didn't appear in corridor section view as you can in attached files.
View 9 Replies View RelatedWe have a data folder on the server mapped as network drive to the clients. The data folder contains all cad data stored from productstream professional.
Due to an over 10 year old environment the data folder contains a huge amount of cad files, library parts, iParts and so on.
Due to historical growth of the environment there are some missing parts (not available on the file system anymore), because they were deleted, are corrupt, and so on. At the root of the data folder there is located the typical cmpinv11.ipj inventor project file.
If you open an assembly either from productstream or via inventor (without productstream) directly from the data folder and the assembly has an unresolved child component because the file isn't there anymore it takes a very very long time until the dialog box for unresolved link comes up (waiting time several minutes 1...10min). Once reached this point one can skip and repair the assembly, of course.
But the question is, how to speed up the time for getting the unresolved link dialog?
The network connection itself is quite OK und the project file itself is also OK. The project file list of every user is pretty small (only cmpinv11.ipj and some standard ipj's).
We think inventor internally scans the whole project-file folders to ensure that the component is really missing but due to the huge environment this takes many minutes and is annoying.
Any bypass for that? Is it possible to apply a temporär setting before opening a potential inconsistent assembly? Or is there a setting like skip unresolved components by default or by a defined timeout?
Because it is Inventor 2010 (Productstream PRO 210) there is no File open Option Auto-Skip unresolved components (like in 2012) but even if it was I guess it wouldn't reduce the time to get the dialog either.
If I have calculated the superelevations and then edit the alignment (for example,I modify the length of spiral), the superelevations doesn´t recalculate. Why?
The guitar (superelevations) in profile view is old. If I load again the style profile view, the data are the same about superelevations.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
I am looking to calculate the volume of an existing berm from a TIN surface. I have read through some of the Civil 3D tutorials, and realize that I will need to have two surfaces (base and comparison), but need to figure out how to create the comparison surface.
View 9 Replies View RelatedI have a corridor with conditional assembly for all 200 sections. One conditions which stretches 200 feet I can not get the daylight link to show in the sections.
View 9 Replies View RelatedI have a site, on which I've created both a berm and a retention pond to contain runoff. I now need to see if this is retaing enough water at a certain surface elevation.
The existing site is one surface and the berm/pond are another surface.
Is there a way to do this?
I have a sketch on a component. That component is being used in an assembly. The assembly drawing (.idw) does not show the sketch on that component. I have made them visible on the component, but don't want it visible on the assembly model. (only the assembly drawing)
View 1 Replies View RelatedEverytime I go to 'save as' the dialogue box does not show. All that it will do is ask me what file format I want and to type in the path (see pictures).
View 4 Replies View RelatedI am having trouble with getting certain pieces of text to show up in my viewport in paperspace. There is text and linework on the same layer. However, only the linework shows up in paperspace, not the text. I have seen this before and don't remember how to fix it. It is a setting somewhere but I don't remember where.
View 7 Replies View RelatedI'm on Civil3d 2010. I have a drawing where i have background masks on most of my text - everything works great. Then I did a "Save As" to give the drawing a new name. After working in it for a day or so, I noticed that all of the text masks don't show. When I hover over mtext (or blocks with mtext), a border shows around the text (only when hovering). But bottom line is the background mask doesn't show at all or print. The original drawing is still fine.
I've checked and this has nothing to do with line merge in the pc3 file etc.
I have a typical storm sewer pipe network in a drawing by itself with an alignment. I data referenced both of these into another drawing. I draw the pipe network in the profile view I created and the pipes that run with the road show up fine. Every once in awhile there is a lateral storm sewer pipe that runs across the road. When I draw these in the profile view they show up, but, only the pipes that are skewed to the alignment show up. If the pipe is perfectly perpendicular to the alignment it does not show up. I have two styles setup. One main one that shows the inner and outer pipe walls and another one for overrides for the crossing pipes and that stlye has crossing pipe walls turned on.
Why is it though only the skewed pipes show up as ellipses in my profile view but the perpendicular pipes do not?
I have a fairly simple corridor, however, I had to modify the alignment, rebuild the corridor and resample cross-sections. Now my right daylight slope won't show up. It shows up in the section viewer, but not the cross-section. I had this problem once before and fixed it, but now I can't remember how I did...I have all targets, sections sampled match corridor sampling etc.
Civil 3D 2012 SP1
Windows 7
LISP code to link to a scr.file.I would like to run ACADDOC.lsp with abobe code everytime I open a drawing.But I want to link the KISP file to script file of mine like C:
View 3 Replies View RelatedIs there a way to make a label in model space for an assembly's name? To keep track of which assembly is which, I have been creating a MTEXT object and just type it in below my assembly. I would like to know if there's a way to make a label just show up with the name so I don't have to create all these text items manually. This would be just for reference only, not used for any final plans.
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
I need to make labels in plan to show the names of the region I make in corridor.
View 3 Replies View RelatedI cannot get the correct code from Facebook to link to LR4. The publish manager displays the plug is installed and running, but then when I try to publish, I get a message from Internet Explorer and Firefox it does not know what to do with each particular protocol.
View 5 Replies View Relatedhow to show in the message box the assembly name or part name in the model browser without selecting it using vba?
View 7 Replies View RelatedI have assembly file in which I have created a work plane "Work Plane19" . Now I wanted to create a new work plane which will be paralle to workplane "WorkPlane19" & offset by 10.5 mm in same assembly document through VBA subroutine. I have tried with following code but getting error,
Public Sub NewWorkPlaneCreate()
Dim oAssly As AssemblyDocument
Set oAssly = ThisApplication.ActiveDocument
[Code].....
I try to develop a vba code to get the coordonates of each part of an assembly and after export them to an excel file.
I build this :
Public Sub Export_Layout_COG()
If MsgBox("Cette Macro va exporter les coordonnées du COG de chaque layout, continuer ?", vbYesNo) = vbYes Then
Dim RefDoc As Document
Set RefDoc = ThisApplication.ActiveDocument
Refdocdisplayname = RefDoc.DisplayName
[Code]...
The code return an error on the red line, I don't catch why?
I want to make a vba code to calculate the Interferences between all parts of an Assembly.
First I modify all holes with thread. Next with de CommandManager I Launch the AssemblyAnalyzeInterferenceCmd. And finaly I modify all holes with thread back.
My question is :
How to wait until the AssemblyAnalyzeInterferenceCmd is finished to continue the code.
Sub Interferences()
Call BeforeAnalyzeInterference
ThisApplication.CommandManager.ControlDefinitions.Item("AssemblyAnalyzeInterferenceCmd").Execute
Call AfterAnalyzeInterference
End Sub
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
i have problem with vba sendcommand method, which i use to send publish command. vba code doesn't wait to finish this command, but continues. i need to wait for finish publishing and then continue.
View 3 Replies View RelatedI want to show one entity middle of the screen and highlight it? Maybe use zoom?
View 2 Replies View Relatedhow I can use VBA to select objects in the drawing, so that the grips are enabled/shown. The editing of the object will be done manually in AutoCAD. All I want for VBA to do, is to select them.
View 6 Replies View RelatedI have a iLogic rule for saving drawings (dwg) to a pdf file in a designated folder. Everything worked well until this Monday morning. Now I get the message: Error in rule: Save2PDF, in document: 13006-027 propflens-1.dwg Value cannot be null.
Inventor 2014 sp1 | Vault basic 2014 | HP Elitebook 8670W | win7 64b | 8Gb | GMT +1
How do i show and close the parts list iso-main menu with code?
View 1 Replies View RelatedI wanted to know if there is a way to restore the link between a part/assembly and a drawing so that the drawing will open when "Open Drawing" is selected from right clicking the part/assembly from the Model browser in Inventor.
View 1 Replies View RelatedI am trying to link a hole feature in a part in an assembly with the number of a particular feature in another part within the assembly. I have a base plate part with a coutersunk hole feature that I want to pattern by linking it to the number of bosses in another part within the same assembly.
View 6 Replies View Related