AutoCAD Civil 3D :: Link Code Hidden In Corridor Section View
Nov 24, 2012I have a problem with editing in link code because it didn't appear in corridor section view as you can in attached files.
View 9 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Section View Not Displaying Corridor?
Dec 7, 2012Using 2012, latest SP. I have a master drawing @ 1:500 with alignment, prof's, corr, etc. I have a second drawing @ 1:200 to be used for section views. I've data referenced the alignment, prof's, srf's, etc. I've created the section views in the section view dwg and xref'd the master dwg.
My problem is that the corridor model will not display in section views anywhere along a spiral in the 1:200 dwg. It displays fine everywhere else along the alignment. Just not spirals.
I have section views in the master drawing that will display the corridor just fine in section view at these same stations along the spirals.
AutoCAD Civil 3D :: Corridor Section Editor View Settings?
May 25, 2012How do I access the Corridor Section Editor view settings and copy them from one drawing to another?
View 1 Replies View RelatedAutoCAD Civil 3D :: Section View Properties - No Corridor Surface?
Apr 30, 2012I changed my Corridor Prop : From "Specific Code" : Top to Datum as shown below
and afterwards my section view Don't have the corridor in it !!
I tried to creat a new one but in the Section Creation tool i could not find surfaces :
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
AutoCAD Civil 3D :: Unable To Get Back To Regular View From Corridor Section
Aug 31, 2012Edited a corridor section. Hit some button (not sure what) now I can't get back to my regular view. If I select the "Top" view, now all that shows up is one contour, and the top of one cross section, like it's only showing stuff that is at one elevation.
View 1 Replies View RelatedAutoCAD Civil 3D :: Code Set Style Not Consistent In Section View
Mar 29, 2012I've been having the issue with code set style and making the section view to look the way I want. I created a new code set style and it shows perfectly the way I want in the assembly. When I create the section views, I specify the sections to have the same code set style, but for some reason, it shows up in a different color.
I provided an example showing the fence line as an assembly and in section view. For "mysterious" reasons, the color is different in the section view than in the assembly. And I've checked many time in the section view properties and assembly properties to make sure that both are displaying the same code set style.
AutoCAD Civil 3D :: Can't See Corridor Section In Section Views Only Existing
Mar 5, 2012I think I just haven't done this in a while and can't find the right setting.
I have existing sections.
I have section views.
I created a corridor.
How do I add the corridor section to my existing cross-section in the section views?
I can view them in the corridor section editor. But I should also be able to add the corridor section to my section views, right?
To plot them, do I NEED to do this through Sheets Sets? I don't have experience with sheet sets yet.
I don't use Civil 3D often enough anymore. Still learning much about the new interface and pulling a design together.
AutoCAD Civil 3D :: Corridor Section Editor Not Displaying A Section
Mar 8, 2012I've got a corridor where the section editor does not show a section that the corridor has created. My frequency is set to 25' with high/low points along curves. At station 22+75, in the model space the corridor shows a section being created (image #2). However, I cannot edit or even see that section in the section editor (image #1). The first screen shot shows the list of stations for the corridor in the editor while the second screenshot shows the model space at the problem station. This is in the middle of a region, so there shouldn't be any issues with other assemblies or regions.
In the section editor, Sta 22+74.91 is listed, skips 22+75, then lists 23+00. I am needing to manually adjust the cross slopes of my lanes. If I view the surface there is a weird dip because at station 22+75 the default slope of my lane is -2%. I cannot edit station 22+75, so I cannot adjust the cross slope of the lanes.
What is causing the section editor to not even recognize a section? How can I edit the cross slope at station 22+75 if the editor doesn't even display that section?
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
AutoCAD Inventor :: Section View Without Hidden Features
Feb 4, 2013When I create a section view in the idw, hidden lines are visible in the cutting part ! How disable these hidden lines and show only the hidden features ?
View 3 Replies View RelatedAutoCAD Civil 3D :: Corridor Code Set - Feature Line Selection
Nov 27, 2012Is there a way to be able to choose a desired feature line when extracting from a corridor? For example, when subgrade and finished grade are on top of each other, it seems subgrade is always coming as default for extraction. I'm not getting the option to select the desired point code as usual for some reason. The best way I found is by turning off the subgrade feature line from the corridor properties, which is a bit tedious.
View 3 Replies View RelatedAutoCAD Civil 3D :: Render And Visualize Corridor Through Code Set Style?
Aug 31, 2012Why am I getting images like these two when I tried to render and visualise my corridor through the Code Set Style?
View 3 Replies View RelatedAutoCAD Civil 3D :: Corridor Feature Lines Don't Update With Code Set Style
Nov 7, 2013How do i get the feature lines in my corridor to change their style based on the code set style selected?Whats the point of defining featureline styles in the code set style if they don't change in the corridor? They only get used when you first create the corridor?
Is there something I am missing or is this the intended workflow?
AutoCAD Civil 3D :: Corridor Surface Ignoring Vertical Link?
Nov 6, 2013For some reason the surface created by my corridor is ignoring the vertical link on the edge of the subassembly. How can I get it to include that?
View 4 Replies View RelatedAutoCAD Civil 3D :: Corridor Section Labeling
Jun 21, 2012how label only the top of my road surface in section view? The road slopes -2% towards a ditch but my my code set labels both the top of road(-2%) and what I assume is the bottom of the road surface (2%) which I don't want to show.
Is it also possible to label my side slopes as 4:1 instead of 25%?
AutoCAD Civil 3D :: Corridor Assemblies In Section Views
Sep 25, 2012I created a base drawing for sections that references an alignment. I xrefed in the drawing where my corridor was created. When I create the section views, the corridor shows up perfectly.
I then created a blank sheet and xrefed in my section view base drawing.In this sheet drawing, only parts of the corridors are visible.I have a C&G on one assembly and a shoulder on another assembly that aren't visible. (see pics)The first pic is my section base drawing.
AutoCAD Civil 3D :: Corridor Section Points Report
Feb 23, 2012When creating a Corridor Section Points Report using the Toolspace>Toolbox>Reports Manager in Civil 3D 2012, the stations get listed but only a few contain point information (see attached).
I am trying to generate stake-out data for a proposed road. I was able to get this report to work successfully in one of the Civil 3D tutorials, so I assume that nothing is wrong with the utility. The problem may be related to my corridor.
AutoCAD Civil 3D :: Section Views (Assembly And Corridor)
Aug 8, 2012I am doing public works type project. A simple road widening project. I created an alignment, surface, profile view and basic road assembly (from tool palettes) and corridor.
I created a corridor and referenced it to my "profile view", "alignment" and to "basic road" assembly. When I created section views, it shows only existing grade based on the surface and the basic road assembly is not showing on my sections. I can't figure out how to do it.
AutoCAD Civil 3D :: No Corridor Section Editor Display
Jun 22, 2012C3D 2012
When I open the Corridor Section Editor, the Ribbon changes to the Section Editor ribbon, but the section window doesn't come up. If I pan around, parts of the drawing disappear. If I close the editor and regen, everything comes back.
AutoCAD Civil 3D :: Corridor Section Editor - Status
Oct 4, 2013Below is the current status of our working view in the 2014 Corridor Section Editor. I can't see us getting any value for our investment into Civil 3D 2014, before Civil 3D 2015 comes out now.
The polar opposite is actually true, we had too much downtime encountering, analyzing and reporting product defects, and it affected profitability and capability.
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
AutoCAD Civil 3D :: Single Errant Corridor Section In Cul De Sac
Feb 6, 2013I have a single corridor "section" that extends from the 'tip' of my cul-de-sac back to the start of the alignment.I scoured the group before posting and didn't see anything quite the same.Would it have something to do with the corridor line being parallel to the alignment?
View 2 Replies View RelatedAutoCAD Civil 3D :: Corridor Section Points Report
Dec 27, 2013I have a problem with the corridor section points report on Civil 3d 2014. It only presents the first station on the corridor.
Attached image.
AutoCAD Civil 3D :: Adding Cross Section To Section View Group?
Jul 17, 2013Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
AutoCAD Civil 3D :: Section / Section View Of A 3dpolyline Along The 3d Polyline
Oct 12, 2012I am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line
View 1 Replies View RelatedAutoCAD Civil 3D :: Conditional Point / Link Code In Subassembly Composer
Jan 10, 2013it is possible to define point/link codes using some conditional expressions. When I try to write in an expression under "Link Codes" I get an error. Is there a way to create conditional codes without the use of "decisions"?
View 1 Replies View RelatedAutoCAD Civil 3D :: Overlapping Section Lines In Corridor Because Of PI In Alignment
Nov 13, 2013Because there is a PI in my alignment, the section lines in my corridor are overlapping creating problems with the surface. Is there anything that I can do in this situation?
View 6 Replies View RelatedAutoCAD Civil 3D :: Corridor Section Editor Vertical Exaggeration
Apr 30, 2013Is it possible to adjust the vertical exageration of the section view in the corridor section editor?
View 1 Replies View RelatedAutoCAD Civil 3D :: Change Corridor Section Points Report
May 16, 2013I am trying to find out if there is a way to change the code for the Corridor Section Points Report. See attachment.
In page 1 of the attachment you will see the names that we prefer for the different zones in our assembly as per our Standards.
On page 2 is the default names that C3D spits out as defaults (under String Cut).
We are running C3D 2012.
AutoCAD Civil 3D :: Corridor Running On Different Alignment Than Section Editor
Jul 26, 2013I have 3 alignments running: EB, WB, and Center alignment. My corridor runs along the EB alignment. Is it possible for me to develop section views for this corridor along the Center alignment?
View 6 Replies View RelatedAutoCAD Civil 3D :: Green Crosshairs In Corridor Section Editor
Aug 24, 2012How do I get rid of the green circles in cross section editor? I have looked in the code set styles, and I have found nothing that will resolve this.
View 2 Replies View RelatedAutoCAD Civil 3D :: Create Multiple Section Views From A Corridor
Apr 16, 2012I am attempting to create section views from a corridor. I have about 80 sections total that I would really like to stack 3 high...then just across the page. Any step by step that make this process easy to understand?
Right now I get 10 high then across the page (using 'draft' option). I've tried to make a dwt at a 10 scale, (setting the viewport at 10 scale and viewport as a 'section' in the properties), but when I use that, the sections start overlapping (this is using the 'production' option).
AutoCAD Civil 3D :: Corridor Section Editing And Subassembly Overrides
Aug 13, 2013Anyway, I'm trying to build a corridor that targets the existing surface with a linkslopetosurface sub. It works just like I want it to, but there are areas where I want to override the target and have it target an existing curb return alignment. Is there a better sub I should be using that will target one first and then a second if the first doesn't work right?
Also, with my corridor section editor, can I adjust the vertical scale to be exagerated? It's really tough to edit the 1:1 ver./hor. scale.