AutoCAD Civil 3D :: Corridor Code Set - Feature Line Selection
Nov 27, 2012
Is there a way to be able to choose a desired feature line when extracting from a corridor? For example, when subgrade and finished grade are on top of each other, it seems subgrade is always coming as default for extraction. I'm not getting the option to select the desired point code as usual for some reason. The best way I found is by turning off the subgrade feature line from the corridor properties, which is a bit tedious.
View 3 Replies
ADVERTISEMENT
Nov 7, 2013
How do i get the feature lines in my corridor to change their style based on the code set style selected?Whats the point of defining featureline styles in the code set style if they don't change in the corridor? They only get used when you first create the corridor?
Is there something I am missing or is this the intended workflow?
View 9 Replies
View Related
Jan 7, 2014
I am building a corridor with the right side of the pavement fitting to the existing surface.The subassembly used to link the edge of pavement to the existing ground is LinkSlopeToSurface.
On the corridor created, the feature line (code P2) of the corridor surface (top) starts from the station 0+025, instead of 0+000.
I was wondering why there is no feature line P2 for station range 0+000 to 0+025? Does that mean the linkage to the existing ground surface not exist for the slope defined in the subassembly?
View 2 Replies
View Related
Apr 6, 2013
I've been researching the options to deal with tessellation of my corridor. I see the option to extract feature lines from the corridor and to maintain a dynamic link.
I've now found a link in the docs for converting tessellated lines to arcs. Can I use this command with a dynamically linked FL? And will it maintain the dynamic link? [URL] ....
View 2 Replies
View Related
May 16, 2013
I have a corridor with the two daylight points marked as BOUL BOUR.
View 2 Replies
View Related
Jun 1, 2012
I created an assembly using BasicLaneTransition. When I apply it to my corridor I am not getting a feature line at the crown (center) of the road. I have used this subassembly on several other projects and have not had this issue. The only difference I can think of is that the other projects we started in C3D 2009 and this one is in 2012.
How do I get my feature line to show without adding a marked point?
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
View 3 Replies
View Related
Nov 3, 2011
I have created Road 1 and assigned Feature Line Styles in the Feature Lines tab of the Corridor Properties and it looks as I expected.
When I go to Road 2, 3 etc I have to manually assign the Feature Line Styles again, so the question is can these feature line styles be assigned via a code set or something.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 4 Replies
View Related
Sep 21, 2012
I cant seem to target a corridor FL and keep it linked to the corridor. Is this the expected behavior? I would think you should be able to, no? For that matter I would think you should be able to pick the cooridor link directly, no?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
View 2 Replies
View Related
Oct 1, 2012
I have daylight_cut at say station 100, then sampled every 20m, however it connect from station 100 all the way to 1000 for example. because there is no such code in between. why can't it create seperate features lines? the thing is sometimes it does it and sometimes it doesn't.
see the redline cutting across the corridor? shouldn't be there.
View 5 Replies
View Related
Apr 4, 2013
I was looking through the docs and all it says is that this eliminates tessellation. I understand that and that's what I'm looking to do. But the docs don't give any guidance on what these numbers are for.
I'm talking about the three options under the "Smoothing" group - "Horiz Deviation", "Weeding" & "Arc Inclusion" (I'm looking at the 2010 docs as that's all I could find at the moment).
View 1 Replies
View Related
Feb 22, 2013
I have grading style set up to create a cut/fill boundary and the same thing for my corridor. I made surfaces from my grading and corridor and no longer need them. I need to keep the cut/fill lines for my design. How can I extract these lines from these objects? I tried keeping the grading/corridor on one layer and lines I wish to use on another so I can turn pieces of the grading off. However, it will not print the cut/fill boundary without printing all the feature lines created from a grading.
View 1 Replies
View Related
Jun 10, 2012
Can you reverse the direction of an auto feature line generated from a corridor in C3D 2012?
View 4 Replies
View Related
Mar 13, 2012
I have a feature line, and a labels table created for it. The table has the following columns: Line or Curve #, Station, Segment Start X, Segment Start Y, Segment Start X, Bearing/Delta, Length, Radius, Grade Ahead.
what code I need for the table to display the station of the feature line at the start of the segment?
I also have an alignment with the same stationing over top of the feature line, but Im not sure how to code a reference text into the table either. I can create an end segment reference text for the plan view labels but even if I copy that code into the labels table it doesn't work.
View 4 Replies
View Related
Aug 31, 2012
Why am I getting images like these two when I tried to render and visualise my corridor through the Code Set Style?
View 3 Replies
View Related
Nov 24, 2012
I have a problem with editing in link code because it didn't appear in corridor section view as you can in attached files.
View 9 Replies
View Related
Mar 14, 2012
Is there any way to do that (workaround method).
View 3 Replies
View Related
Jun 14, 2010
I am using the Mill&Overlay sub set to overlay an semetrical road and a crown offset of zero. I one file the crown point feature line has gaps in it and in another file it zig zags along the road.
I forgot to mention that the triangles and the cross section look as expected. trouble is I want the crown profile
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
View 3 Replies
View Related
Apr 17, 2012
I have a road corridor with feature lines connecting the road edges (cyan), ditchline (dark green), daylight_cut (yellow), daylight_fill (green) and daylight (white). At certain random locations along this corridor I am getting feature lines which span from one station to another, ignoring all of the corridor sections in between. The image below shows a daylight_fill line spanning over 60m, even though there is a daylight line through this region.
In this area a ditch line and a daylight_cut start at 4+110, skip over the next cut section at 4+120 and jump over a hundred meters to the next piece of ditch at 4+280..This corridor builds clean - no error messages reported.
View 9 Replies
View Related
Sep 10, 2012
Is this the only way to extract feature lines from a corridor i.e. selecting each one - it gets a bit tedious.
Is there any method to select a corridor and extract all the feature lines that are set to display?? I think third party software (Sincpac?) can do this but this is not an option for me and I am not well versed enough in .NET to write something to achieve this myself.
View 3 Replies
View Related
Feb 19, 2012
No feature lines in offset corridor
View 3 Replies
View Related
Nov 13, 2013
We have recently started using a feature code library with our tremble survey gear and have been processing the linework and exporting the lines as a DWG and the points as a CSV and when iput them in the same DWG in Civil3D the point and Line Vertices are exactly on top of each other. Does any know how to fix this? I dont know if its to do with rounding, LSF, or projection to Cartesian?
View 1 Replies
View Related
Jun 11, 2013
How do I make my corridor feature lines to change color? I want daylight cut to be red and daylight fill to be green.I've checked under "Toolspace/Settings/General/Multipurpose styles/Feature line styles/Corridor daylight line - Cut" but it doesn't work.
View 4 Replies
View Related
Oct 2, 2012
Is there a way we can support a duel feature code ?In the field the surveyor would enter into his file “ EWD[*TB[“ .This code indicates the beginning of the “Edge of Woods” and “Top of Bank” .
Each shot after that would be along the edge of woods and top of bank . “EWD*TB” -- This code indicates shots taken along the “Edge of Woods” and “Top of Bank”
The surveyor would end this feature with “ EWD]*TB]“.This code indicates the ending of the “Edge of Woods” and “Top of Bank”
View 3 Replies
View Related
Sep 20, 2013
My corridor Feature Lines for Daylight Jump across in different areas (see attached PDF)
when I look at it in 3d it looks ok but the plan view the jumped lines show up.
View 4 Replies
View Related
Dec 11, 2012
I needed to remove a feature line that I used as a break line when creating a surface. When I removed the feature line from the definition of the surface, the grading did not change. It appears the points created by the feature line remain which is why grading didn't change. The only work around was to delete these points.
I noticed the same thing happens when I removed the surface boundary and inserted a new boundary. why these points remain and how to remove when I delete boundary and feature line from surface?
View 9 Replies
View Related
Jan 11, 2013
i have a corridor. the corridor feature line that is supposed to hit the proposed centerline is following my existing grade instead of where the profile is. in other words, the corridor line i need at the centerline when i do "feature lines from corridor" is following my existing grade instead of the top of my road. did i accid. change something? i need it to follow the top centerline of my road. the red arrow is the line i need at the top centerline.
View 3 Replies
View Related
Oct 24, 2012
The company I work for uses Illinois DOT linework Codes.They had been using Microstation. But the office Im in uses Civil 13. Any linework code set that I need to process field to finish?
View 1 Replies
View Related
Jun 22, 2013
I have problem with corridor surface boundary , in curve boundary line is jumping on daylight fill , but i have created surface on wearing layer ,also when i am adding boundary there is only 3 types of adding , corridor extends , polygon and interactively , photo attached.
I am using Civil 3D 2014
View 4 Replies
View Related
Sep 26, 2013
Is there any way to project feature lines into a profile when the plan view is xref'd? I have my plan view "existing topo" with all existing features/Figures and a existing surface.
My profile is a separate dwg with plan view xref'd and surface a data shortcut. Of course there are feature lines and Survey Figures in the existing top I want to project into the profile, but can't because it is an xref. Besides copying .
View 1 Replies
View Related
Oct 31, 2013
C3D 2012. I am trying to get the distance from the start of a featrue line to a selected point. My object is "FLobj" and my Point is PT1. I am using the method Get2dDistanceAtPoint. This is the line of code.
(vlax-invoke-method FLObj 'Get2DDistanceAtPoint pt1 'pDistance)
I keep getting "too many actual parameters".
View 2 Replies
View Related
May 19, 2013
I am wanting to add the name of my feature line to a label style. I am trying to create a label style that will show Lot Number and Area. I know i can create parcels, but i dont want to! I have also created a map table that can do exactly what i want on polylines, but will not work on an xref. Labelling featurelines does work in xrefs.
how to add the name into a label style?
View 4 Replies
View Related
