AutoCAD Civil 3D :: Corridor Style-getting Points To Show In Plan View?
Dec 31, 2013I'm not too familiar with corridor styles. How can get points to show on my cooridor in plan view?
View 4 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Showing In Plan Points From Assembly / Corridor
Aug 13, 2013I've been working on a proposed ditch relocation.
I made an alignment, profile, build an assembly with it's constraints (2:1 until a certain elevation and then 3:1 to the existing ground), and made a surface from that corridor.
Now i wanted to know this : How do i generate a polyline with the assembly information ?
Using : Autodesk Civil 3D 2012
OS : Windows 7 - 64 bit pro
AutoCAD Civil 3D :: Label Corridor Links In Plan View
Jan 18, 2009Is there a way to label corridor links in plan view ?. I would like to show my pavement cross slopes from corridor in plan view.
View 5 Replies View RelatedAutoCAD Civil 3D :: Profile View Style X Plan Production?
Jul 9, 2013I'm working with plan production sheets and having some trouble. My vertical exaggeration makes me want to split the profile, but when I do it, they get glued together. My left vertical grid numeration stays on the middle of the grid and I get a lot of information overlapped. What I need is to put some gap between these, or split'em. Other issue is that the axis offset of my Profile Style isn't being applied, as well as other configs.
View 2 Replies View RelatedAutoCAD Civil 3D :: Show Inside Diameter Of Structure In Plan And Profile View?
Jul 9, 2013how to show the inside diameter of structure in plan and profile view. Do I have to make sump and wall thicknesses 0 to do so?
View 5 Replies View RelatedAutoCAD Civil 3D :: Projecting Linework On Design Plan To Corridor / Surface?
May 13, 2013My company had always used LDD until we were mandated to switch, our first project in Civil 3D is in the works. So far we have gotten through the beginning stages (alignments, profile, corridor, assemblies) but we are having a major issue with where to go from there. Right now I am trying to complete the design line work on the plan (wheelchair ramps, driveways transitions and signage) As of now I cannot get anything to line up easily with the corridor. I have been able to snap to the corridor so I can create a line at that exact spot to be correct, but then when I offset it will not change the elevation, I tried doing feature line and projecting the feature lines to the surface and some of it works but it becomes very buggy. My transition lines don't transition and some other lines I would expect to be at the same elevation have major grade changes. How to create the luinework at the correct elevation and with correct transisions along your corridor and surface?
View 2 Replies View RelatedAutoCAD Civil 3D :: How To Make A Label In Plan With Sections Slopes From Corridor
Jan 18, 2013I saw on you tube channel [URL].........
How to make this label where I can show the design slope in plan.
AutoCAD Civil 3D :: Working Back And Forth From Plan View And Profile View
Jan 18, 2013I was given a horizontal centerline of a 5 mile bike path. We have to stake all the even stationing every 50 feet and all the VPC's and VPT's with vertical elevation. I have created the horizontal profile and also the vertical profile including all the vertical curve information. Is there an easy way to incorporate the elevation information back into the plan view so I can create points that carry x,y & z points that I can transfer out of autocad as a .txt file so we can upload it on our gps equipment?
View 9 Replies View RelatedAutoCAD Civil 3D :: Add An Object From A Profile View To A Plan View
May 29, 2013Is there a way to easily add an object from a profile view to a plan view? I have developed a pipeline profile that has high and low points and I would like to show these points on the plan views.
View 9 Replies View RelatedRevit :: Possible To Show Symbols In A Plan View
Jan 17, 2013I'm currently looking into switching from Vectorworks to Revit due to a job application I'm being offered. What I really want to know is if the following floor plan is possible to make in Revit. I just want floor plans to be with color to better show the different things on it and make them more clear.
I also want to know if it is possible to show symbols in a plan view other than just a rendered hidden line view of the 3D part of it, so I can have a simplified version for the plan view and a detailed object for the 3D. Like you have a 2D-plan component for the plan views and e 3D component for all other views.
AutoCAD Civil 3D :: Corridor Section Points Report
Feb 23, 2012When creating a Corridor Section Points Report using the Toolspace>Toolbox>Reports Manager in Civil 3D 2012, the stations get listed but only a few contain point information (see attached).
I am trying to generate stake-out data for a proposed road. I was able to get this report to work successfully in one of the Civil 3D tutorials, so I assume that nothing is wrong with the utility. The problem may be related to my corridor.
AutoCAD Civil 3D :: Limit Frequency On Points From Corridor
Jun 4, 2012I am using the COGO Points from Corridor command but would like to limit the freqency of the created points to only every 50 ft (half station) or so. Is there a command I can change to make this happen ??
I've checked the CreatePointsFromCorridor command setting and it doesn't seem to be there...
AutoCAD Civil 3D :: Corridor Section Points Report
Dec 27, 2013I have a problem with the corridor section points report on Civil 3d 2014. It only presents the first station on the corridor.
Attached image.
Revit :: Create Non-plottable Line Style That Is Only Visible In Plan View?
Feb 23, 2012Is it possible to create a non-plottable line style that is only visible in a plan view? I want to use something other than the invisible line.
View 3 Replies View RelatedAutoCAD Civil 3D :: Cogo Points Plan Readability
Sep 5, 2013My delima is regarding cogo point readability. I'm used to LDD so this may be the issue. I set a cogo point but I want it to stay in the same orientation. if I use orbit or dview the cogo point data reorients (rotates) to line up horizontally. I would like the data to remain as set originally. I tried changing plan readabilty in label styles but when I drag the point it rotates to the current view orientation. Is there a way to control the rotation once dragged so it does not reorient if I change the orbit or dview?
View 9 Replies View RelatedAutoCAD Civil 3D :: Cannot Get Corridor Surface Boundary From Daylight Points
Jun 22, 2012Cannot get corridor surface boundary from daylight points. Is there another way so that I do not have to trace the outer limits?
View 3 Replies View RelatedAutoCAD Civil 3D :: COGO Points Duplicating Along Crown Of Corridor
Mar 19, 2012I have created COGO points from my corridor, there seems to be 2 sets of points ontop of each other along the crown of the road. They are different numbers, so its not the same point twice, why it would do this?
View 4 Replies View RelatedAutoCAD Civil 3D :: Change Corridor Section Points Report
May 16, 2013I am trying to find out if there is a way to change the code for the Corridor Section Points Report. See attachment.
In page 1 of the attachment you will see the names that we prefer for the different zones in our assembly as per our Standards.
On page 2 is the default names that C3D spits out as defaults (under String Cut).
We are running C3D 2012.
AutoCAD Civil 3D :: Corridor / Surface Style To Display Slopes
Jun 6, 2013I am looking for either a corridor style or surface style to display slopes while in plan view while working on a corridor. I know you can turn on slope arrows as a surface style, but I am actually looking for the grade to be displayed next to a slope arrow. Hopefully I am explaining it properly.
I just am looking for a better way to spot errors before putting surfaces into machine control without checking station by station in the section editor.
AutoCAD Civil 3D :: Render And Visualize Corridor Through Code Set Style?
Aug 31, 2012Why am I getting images like these two when I tried to render and visualise my corridor through the Code Set Style?
View 3 Replies View RelatedAutoCAD Civil 3D :: Change Codes For Corridor Section Points Report?
Nov 7, 2013I would like to have my corridor section points report to have different labels for the points like Edge of Shoulder or EOP instead of labels like P2 and Hinge. Is the only way to do this to somehow change the codes in the stock subassemblies?
Civil 3D 2014
AutoCAD Civil 3D :: Edit Corridor Surface Manually By Editing Points
Oct 4, 2013I was trying to edit a corridor surface manually by editing points and tin lines but for me its much easier to edit the contours itself so I explode the surface into polylines and fix the contour issues but when i make it into a new surface the Surface does not look clean anymore. When I look at it in the object viewer it looks rough and jagged and doesn't look like a road at all, however my original corridor surface did look clean with perfect roads and cul de sacs i just wanted to fix the contours outside the road. I tried extracting it like i should have done in the first place but when i add the contours to a surface it still looks ugly and jagged. Another thing is that when you look at it in 2D or plan view the contours look exactly the same but when i look at it from a perspective view or 3D that's when you see the difference.
View 3 Replies View RelatedAutoCAD Civil 3D :: Quick Profile Of Corridor - How To Turn Off Assembly Points
Oct 21, 2012I've attach a profile of a corridor.
I don't know how to turnoff the assembly points .
I may send another inquiry after this it has to with corridor surface and boundaries.
AutoCAD Civil 3D :: Surface Slope Style Plan Read?
Jan 22, 2012Using Civil 3d 2012, I have a slope label with mult lines, and set to plan read.
When I rotate the label, the goes to plan read, but the bottom line text is on the top, top on the bottom.
I hope it would be simular to mirror.
I look at the expression, but didn't see any way to get the label angles.
AutoCAD Civil 3D :: Corridor Feature Lines Don't Update With Code Set Style
Nov 7, 2013How do i get the feature lines in my corridor to change their style based on the code set style selected?Whats the point of defining featureline styles in the code set style if they don't change in the corridor? They only get used when you first create the corridor?
Is there something I am missing or is this the intended workflow?
AutoCAD Civil 3D :: SAC- Marked Points / Creating Corridor With Custom Assemblies On Two Alignments
Jan 7, 2014I am creating a corridor with custom assemblies on two alignments. the alignments are not parallel and graded independently.
Between the two assemblies I would like to fill from one assembly to the other with a dynamic link. I can't do this as a target to featureline etc as it is within the same corridor. We have created the link with a target but this was done by creating a non-dynamic featureline from the corridor and using that as the target. This is obviously not great as far as keeping the corridor dnamic is concerned.
So I would like to customise a subassembly to allow it to target a marked point on an adjacent assembly.how the SAC tools (Get marked poinit or set marked point etc.) can be used to do this. The help file is less than useful. I am still on 2012 and dont have access to the 2014 SAC yet but will do shortly.
AutoCAD Civil 3D :: Show Earthwork - EG And FG On Plan And Table
Dec 5, 2013I need to show earthwork (+ or -), EG and FG on a grid. cogo points do not seem to have reference text functionality. surface labels seems to be able to do it, but cannot give me a table.
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
AutoCAD Civil 3D :: Does Style Setting Plan Readability Work For General Notes
Mar 15, 2013Does the Style setting Plan Readability work for General Notes? I've been thinking we should use notes for all our text so that they react the same as all the other Civil 3D labels. But they don't seem to. They scale correctly but stay parallel to the UCS.
I've tried this in a fresh drawing from a simple template and from an OOTB template. They never rotate in a layout. Is this the normal behavior or am I missing a setting? This is how I have it set in my style:
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
AutoCAD Civil 3D :: 2013 / Changing TOP View To TOP-Front View For 2 Overlapped Points
Sep 23, 2013I created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies View RelatedAutoCAD Civil 3D :: How To Make Labels In Plan To Show Names Of Region
Oct 6, 2013I need to make labels in plan to show the names of the region I make in corridor.
View 3 Replies View RelatedAutoCAD Civil 3D :: Section View Not Displaying Corridor?
Dec 7, 2012Using 2012, latest SP. I have a master drawing @ 1:500 with alignment, prof's, corr, etc. I have a second drawing @ 1:200 to be used for section views. I've data referenced the alignment, prof's, srf's, etc. I've created the section views in the section view dwg and xref'd the master dwg.
My problem is that the corridor model will not display in section views anywhere along a spiral in the 1:200 dwg. It displays fine everywhere else along the alignment. Just not spirals.
I have section views in the master drawing that will display the corridor just fine in section view at these same stations along the spirals.