I embedded a label (Generic Annotation) into some families that is only shown on plan views. Is there any Label that can be shown in the Room elevation views. I attached a simple familie with a label.
View 1 RepliesI have some generic labels inside families to display parameters. These work but they seem to randomly disapear.
I thought it was only happening when families were joined as when I unjoined the offending families the labels were visible again but then after closing and opening the view some of the labels have disapeared again.
If I copy this family to a new location the labels will be visible.
i want to create a schedule that will show which views are visible within a Revit 2012-2013 plan view. Any way to do this or a work around?
View 7 Replies View RelatedI created few families then loaded into project when i placed them all one of the type was not visible in Level view.
View 2 Replies View RelatedRevit Architecture 2012 Callout "Reference other views" is not filling in Callout Labels. I am picking the scale and the picking a View in the "Reference other view" pulldown. The callout labels do not fill in. Just "-". The View I am referencing is a Callout View from a Section already called out on a sheet.
View 3 Replies View RelatedWhy am I getting different dimensions and locations in plan and section views for stairs?
View 4 Replies View RelatedI started a new project. I linked a revit file. I copy monitored key levels from the linked file. The color of the level heads is black and this indicates that there are no associated plan views. My question is, what is the best way to create plan views from the copy monitored levels?
View 1 Replies View RelatedI am working in a project where I need to represent the reflecting ceiling edges in the plan view. I put the first floor plan as underlay, and selected the RCP projection but I don't see the dropped ceiling lines to select them with the linework command. I have done every thing possible with the view range but I don't see the lines.
View 7 Replies View RelatedWe would like to make the transparency of glass-materials visible in views and section-views by using the "realistic style". During a 3d-view our glass-material looks like transparent. Isn't it possible for REVIT to display the transparency of materials in views ?
The workaround to hide "glass" by using "overriding visibility" is not possible for us because some of our families and project families are using glass-materials inside (Showcases f.e.).
Software (German) :
RAC 2012+2013
Inventor Pro 2013
AcadM 2012
MaxDesign 2013
Sketchup 8 Pro
I created a keyplan as a generic annotation family, with masked regions representing the various segments of the building. For some reason, my palette of hatches within this family template is very limited, and I cannot choose a dotted pattern for the masked regions, which is an informal company standard.
From what I've seen, adding new hatches is a cumbersome process. Since a simple dot pattern is available in project files though, is there a simple way to add that hatch to this family file?
I have a problem with point codes in section views in civil3d 2013. They are not showing at all. Drawing was made in civil3d 2012 and all point codes with defined styles were displayed correctly in section views and now they are all gone. Just link codes are shown. Is there something in setup of code styles that has to be changed?
Even if i set up new code and new label style it does not show up in section view after rebuild. Just in assembly.
If i do the same for link label it does show both in assembly and in section views.
Since the end of Aug. 2012 I've been making families for a manufacturer. I left Friday evening with good families. This morning I am finding all the families I checked with a problem.
When I move the cursor across the various views it doubles the views. Rolling the mouse wheel one click either way to zoom in or out cleans the view but on the next time the cursor goes across the view it doubles it again. Now there are 4 views overlapping each other. The next time it is possibly 8, and so on. It is difficult to count them because they are overlapping but it looks like they are doubling each time.
The software is Revit Architecture 2011 and the computer is a Dell Precision T3500.Are the families corrupted or is it the computer? Is there a toggle I hit that I shouldn't have?
I am trying to take a countertop that I have in this bathroom remodel floor plan and place it onto a separate sheet so that I can send it out for pricing. I created a new sheet "countertop details" However, it is not letting me add it - I keep getting this warning "Can't create this kind of element in this view in the current mode." I know the answer is in one of the parameters but I am still trying to get used to this program and teaching myself.
View 3 Replies View RelatedAre there any known methods (work-arounds or otherwise) for linking cad files in families?
View 1 Replies View RelatedI have a pile family where i have created a Shared Text parameter under Identity data called Vert Load. I have nested this into a pile cap family in several locations and have the same Shared Text parameter. If i select the pile in the pile cap family i have the option to put a value in the properties dialogue box under Vert Load. The pile cap family is now loaded into my project and the parameters shared in the project. When i select the Pile cap in my project then i have the option to add a value for the Vert Load but in this pile cap i have 3 piles and i want to give different values for each. When i select an individual pile within the Pile cap family then the Vert Load value is greyed out.
I want these vert Loads to appear in a schedule... I've attached a couple of images.
I am doing a window nested family with two windows that have three voids to perform the wrapping of the stucco layer and the gypsum layer independently, but in the nested family I get a wall sleeve between both windows. I have used voids with parameters in the nested family, but when inserted in the projects the voids don't cut anything. See the images.
View 9 Replies View RelatedIf i delete a family from the project browser, under families expanded folder group, will this delete them from the project and reduce the file size?
Best way to delete just unwanted families that have been loaded into the model?
I know of purging the model but i believe this will potentially delete tags i may want and other information that just not being utilized at the time of purge.
I recently got revit 2012. It installed fine, however I see no templates or revit family in the following folder
C:ProgramDataAutodeskRAC 2012
How should I get the families and templates for revit?
I'm putting various doors together, and we have a variety of frame types / door leaf combinations - including occasions where door leafs are inserted in glazed screens (These are timber doors / screens).
It seems to make sense to have the door leaf as a family, then nest those into hosted door frame / screen family. This would allow the 3 or 4 different door leaf types to be switched into the frame / screen combos.
The principal seems to work - but before embarking on the process of putting these together, are there any consequences that should deter me, or that I need to take into consideration ?
What determines the default elevation when inserting familes? I have a wall hosted family that always defaults to 4'-0". I have tried setting the default elevation in the family but it always defaults back to 4'. I have this issue with other familes as well.
I know I can set the elevation when I insert it but having to so that every time seems pointless when the elevation will never change for a family.
Windows 7
RAC2012
I'm trying to work out how to modify an existing, out of the box Revit family, a window, to create a new one, and struggling with it.
What I'm looking to do is to take the family (from the metric uk template) "Windows_Sgl_Horz_Bars.rfa" and add a second window bar in. What I'm finding is I can copy the window bar extrusion easily enough, but getting it to constrain to the sides of the window frame as the middle one has been done (position not changed from the original) , it doesn't work, when I flex the model I keep getting "constraints are not satisfied" warnings.
When I move the copied extrusion to the sides it looks like it is snapping to the constrain line of the pre-existing window pane, I don't understand why the new alignment with an existing one doesn't work.
I had been looking to generate a lot of new family content by modifying what has come out of the box, if I can't fathom it, its going to be a lot of work.
I'm a new Revit user and can't seem to get the hang of fill patterns.If I go to Manage>Additional Settings>Fill Patterns Ise a list of a couple of dozen or so fill patterns with the Drafting Button selected.
But when I try to modify the fill region in a family I'm only given a choice of about six of the patterns.how to "load" the other pattern types.
How to restore families purged from a project? Specifically, a new user purged everything not in use from the model, and is now unable to place a 2x2 ACT ceiling. Drawing one in another file and pasting into the model has no effect. This family is not listed in the Imperial Library; is there some other location for these system families?
View 2 Replies View RelatedI have a family that has over thirty types and I need to update a single parameter value across all types to be the same value. Is there a global way to perform this task instead of the current copy/paste/paste/paste method I am doing. I thought about exporting to a catalog and modifying the text file in Excel, but I lose my formula when I do that.
If this isn't possible, this would be a good wishlist item, Autodesk - where a family has global parameters that are consistent throughout the family, regardless of type.
how to get rid of English system families in country specific project template? The problem is that originaly that project template was made in English version of Revit with English template. Since it is very custom template I have just translated English families into local language when we moved to localized version but I was not able to do that with system families like System Panel for Curtain Wall, basic Mullions and also I had trouble with Solid hatch.
View 1 Replies View Relatedknow a way to automate reloading families in a file?
I would like to automatically reload or reload multiple famiiles in our default template file.
still on this family quality control audit... i've come across some new and entertaining behavior.
several fmailies (face based) flip host sides with their flip controls as expected, but if i mirror them , instead of flipping along the mirror line as an accurate reflection, they ALSO flip top to bottom, AND around the face.
the right family in both views is the original, the left is the new mirror. (plan and elevation views in wire frame included) you can see it landed within the wall, and upsidedown.
I am trying to produce a Camera symbol to indicate the position of where a photograph has been taken on a site plan. I also want to be able to rotate the symbol to indicate the direction of the view and further to have a horizontal tag that shows the photograph number. Therefore I have been trying to create two families, a Camera Symbol and a Camera Tag so that the former can rotate and carry other information such as Date, Title etc., whilst the later needed to be kept horizontal. In trying to do this I started trying to create a 2D Model Family for the Camera but you cannot, it appears, to create a 'filled region' in a model family but it does appear that you can have a Symbol imported into the family. This I have tried to do by creating a Camera Symbol but when imported it remains invisible despite the visibility setting for annotations being set to visible. Since an annotation cannot reference an annotation, is there any way that I can create a Camera Symbol that does what I wish? I feel that I might be missing something fundamental.
View 9 Replies View RelatedCreating a particular object for use in a revit project. I have attached a group of images.
In short, it is an arched wall that is made up of a series of masonary objects (6types), each with the same dimensions, the only difference being they have different openings. The objects just need to be represented as a solid masonary for now. The individual objects need to be shuffled around the arch to test different configurations.
Would the best approach be to develop the objects as generic model families?
Is there something I have to do to load basic window and door families?
Or do I have to get individual families like Pella to get any windows?
Basically the question is if it is possible to explode families similar to blocks in AutoCAD.
Here is an example: A Family made for placement in the model has 2 nested families. Once placement is done is it possible to eliminate the initial family so only the nested families remain? All the parametric values can go away that’s fine and the nested families are also shared if that matters.
Since I come from AutoCAD and started with Revit v2012 it is basically like a block within a block which you could just explode so much until only lines are left.