AutoCAD Inventor :: Area Of Part From Drawing View
May 21, 2013
Is it possible to get the "actual" calculated area of the face of a part from a drawing view? I looked at the drawing view object in the api but didn't find what I was looking for. What my goal is, I want to calculate the actual square foot of this piece and then subtract it from the overall square foot so I can calculate waste. Perimeter's of pieces can be in multiple forms, radial, straight or a combination of the two. See image below.
View 1 Replies
ADVERTISEMENT
Oct 13, 2013
If you've had to use different design view representation of the same PART on a drawing in multiple Views at the same time, you already know that whenever you suppress completly a feature, the representation loose the condition stated in the model view and if the suppressed feature is reactivated, it then appear in all view. You have to right-click on the view and select "Apply design View" to reset it, or re-select the design view representation in "Edit view".
Recently I faced a case where i had to build a iLogic multi-body part representing a crate made of either sheet or bar, with a removable top and variable solid for top, sidewall and base, driven trought a in-drawing form! Reason being the customer wanted a easy, useable model for the shipping clerk to generate a custom crate drawing for the crate contractor, therefore freeing precious time for the drafting departement. Usually I would have used occurence visibillity from a assembly, but the document management part of the deal, was too much for the computer illiterate user... So, off i went creating a multi-body part, only to face the aforemention problem with view changing representation due to complete solid suppression.
So here's How-to Set representation view for part in drawing:
The trick is to set every view to it's representation by using the edit window interface code.
The iLogic line to set a View to a specific Design View Representation:
ActiveSheet.View("1").View.SetDesignViewRepresentation("View5", False)ActiveSheet.View("1").View.IsRasterView = FalseThisApplication.ActiveView.Update()
I use this code in "IF" statement. You must repete the code for each view, removing the "Raster" line force a raster only reaction on the view, and the update must be placed after each view, otherwise it only update the last one.
Example:
If TYPE_COUVERCLE = "AUCUN" Then
ActiveSheet.View("2").View.Suppressed = TrueActiveSheet.View("1").View.SetDesignViewRepresentation("View5", False)ActiveSheet.View("1").View.IsRasterView = FalseThisApplication.ActiveView.Update()ActiveSheet.View("3").View.SetDesignViewRepresentation("View2", False)ActiveSheet.View("3").View.IsRasterView = FalseThisApplication.ActiveView.Update()ActiveSheet.View("4").View.SetDesignViewRepresentation("View1", False)ActiveSheet.View("4").View.IsRasterView = FalseThisApplication.ActiveView.Update()
Else If TYPE_COUVERCLE = "CONTREPLAQUÉ" Then
[Code]...
I'm telling the model that the disapearing element "TYPE_COUVERCLE" is driving the representation, only when it change does it fix the view, regenerating or changing the Design View Representation (the TYPE_SIDE and TYPE_BOTTOM are always active or always suppressed in their respectives views, therefore not influencing their respective appearance in other view). If you had multiple dissapearing solid or feature you would have to build a similar code for every one of them...
View 1 Replies
View Related
Sep 21, 2011
I thought I kind of understood level of detail and master views but apparently not. I have an I-Beam that I have cut and bent in the part file. In the drawing I would like to show the beam both full length and in the bend configuration. From my reading I thought I would be able to create one view with the part in final shape and one view where I suppress all the bends and show the part with the cuts in it but all flattened out. I created view1 with the part bent, I then created view 2 and supressed all the bends. Unfortunately the bare does not toggle back and forth in the part, and when I place the part in a drawing. I am still not bale to have a difference in the part in the drawing with the two configurations either. What is the proper method of obtaining the two different views?
Also is there a way to request software enhancements?
We create many large assemblies where the shop uses a cut sheet to make the parts. Since many of the parts have secondary opperations like forming or cutting done to them i like to create a second sheet with the piece parts dimensioned on the sheet. In SolidWorks i would simply create the views, create an assembly BOM and link the balloons to that BOM, end of story. Not in Inventor! And creating a million LOD views to hide all but the one part in each view is not an answer for a professional CAD program.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
View 2 Replies
View Related
Sep 16, 2013
We put several parts on a single drawing sheet and ,to include the part number in the drawing view label, we must edit each view label and change the type to Properties_Model and the Property to Part Number. Is there a way to set the default of a drawing view label to include the Part Number? I tried modifying the styles to include <PART NUMBER> but it the text "<PART NUMBER>" came in instead of the value. To get the value, I had to edit the view label and hit the X with a down arrow to get the part number to show up, which is not much different than having to edit the label and change type and property. I'm looking to avoid all the view label editing as much as possible.
View 9 Replies
View Related
Nov 7, 2013
I frequently use the "Make Components" feature in order to derive assembly parts from solid bodies in a single master part file. Then I can quickly align the parts in the assembly with the "Ground and Root Component" utility. However, when the part is placed at an angle, the derived part becomes misaligned in the viewports of my idw files after the part gets rotated to a new angle. Then I have to manually reset the rotation by editing each viewport and selecting "View Face." If the angle has changed only slightly, sometimes I won't notice the difference, and I'll forget to re-align my viewports. Is there some way to automatically keep a viewport aligned with an specific face on a part?
If that's not possible, I guess the simplest method would be to place each part into its own assembly and constrain it to the global UCS, but I don't want to have to do that for every angled part in my assembly.
I also considered drawing only sketch blocks in my master file for the angled components, and deriving the sketch blocks to create parts that are properly aligned with the origin planes in their respective ipt files, but with that method I'd end up with a more complex master file with lots of exported parameters and extra working geometry, and I'd have to constrain these parts manually instead of using "Ground and Root Component."
-Using Autodesk Inventor Professional 2012
View 2 Replies
View Related
Feb 7, 2012
I need to show a particular part in a drawing view so that it's clearly visible. I mean, I can see it fine, but I would like it to pop out a bit more than it does and not blend in with other lines around it. Is there anyway to do this? I know you can make an entire view colored, but I just want one part colored within that view.
If not, then how do I remove the lighting from a particular view so that the parts will show as solid colors in a drawing view? They currently show with like a white reflection or sheen and a sort of gradient coloring to them.
IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
View 2 Replies
View Related
Dec 8, 2011
I can't get the cable to show up in any drawing views.
View 3 Replies
View Related
Apr 11, 2013
My customer is having trouble with the part list feature inside the Inventor 2D drawing.
For example, He has a car assembly file with 4 wheels and alot more subassemblies, then he creates a view representation which only visible for 1 wheel.
When he generates the part list in Inventor 2D drawing, he go to part list >filter setting and set to ‘’Assembly view representation’’ but the quantity for the part list is still showing as 4 as per attachment.
change the value manually inside the part list table?
View 5 Replies
View Related
Oct 23, 2013
I order not to hide components, i want to make a break sketch and remove a piece from a part from an assembly in the isometric view in a drawing. can i do that?
View 4 Replies
View Related
Oct 4, 2012
To create my new part, i used the deriven part of another part, and used only ‘Body as work surface’ before inserting in my new part.
When I create the drawing of my new part, why is it that I still see all the ‘Body work surfaces’ of the direven part?
When I make it on my other computer I dont see it... so it is surely an option…
View 1 Replies
View Related
Apr 12, 2012
Possible to display Part Area in a Column in a Parts List on an idw?
View 3 Replies
View Related
Apr 26, 2013
In most cases threaded parts are designed without true surface (just cylinder with texture) thus part surface area is calculated wrong (less than it is i real world)).
any automatic way to get true value of threaded surface which is modeled in traditional (simplified) way?
View 6 Replies
View Related
May 6, 2013
Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies
View Related
Sep 27, 2013
After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
View 3 Replies
View Related
Nov 25, 2008
Each time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?
View 4 Replies
View Related
Apr 16, 2013
My question is to find the dimension in the drawing area
for example
If we observe in the drawing left hand site we can see alphabets in the border area and number at top border area
if the dimension lies between "A" on left hand side and "1" on top border srea
then i want a message the dimension lies on A1
View 1 Replies
View Related
Apr 1, 2012
Does view rep work in part file. I remember few months before some one wrote saying not in part file and it works only in assembly file. Is it still the case. How to turn off few parts in my drawing.
View 1 Replies
View Related
Oct 17, 2011
How do I calculate the area for a section of an extruded profile and display it in a drawing note? I see how to add a field <AREA> in the text dialog box, but it comes up as N/A in my text box in the drawing. This is also the case for <MASS> and <VOLUME>. How do I get the drawing fields associated with the physical properties of the model?
View 2 Replies
View Related
Jun 12, 2013
I'm laying out a drawing with all tabletops used in our project for a linolium- fitter to set a price on covering the about 12 tabletops in total.
I dont know if this is correct English or if it make sense at all, but what I was wondering about was: Could you retrieve the total m2 of all the tabletops in a drawing? Or do I have to go back to the aim and get them one by one?
View 3 Replies
View Related
Apr 2, 2013
Is there a quick way to detail parts from an assembly without having to browse to a part and then search through and select a part and insert a Base View?
For instance from within SolidWorks you can insert a view of an assembly and if you need to detail any part within that assembly you can simply click/select on the part in an assembly view and right click insert view then your View Menu pops up and you are moving forward. If you have to detail several parts you can spit out their Base Views in a matter of seconds. Even if you are making a seperate sheet just for the parts it is easier to insert an assembly view off the sheet and select the parts from there insert all of your part views then delete the assembly view if you want. You can also go to the properties of each view and link the balloons to your assembly BOM.
It is very useful if you are generating drawings such as I do with most parts for the assembly being detailed on the same sheets.
So is there a quick way to get the parts detailed?
View 9 Replies
View Related
Jul 6, 2012
An IDW view is showing a second iteration of a part instead of one of each. I have tried turning the visibly on / off in the ipn. I have also toggled the associativity on / off. The view shows the correct image during its preview, but when the view is done being created, it shows the wrong part again.
View 6 Replies
View Related
Sep 11, 2013
For some multibody parts I use view representation in order to show for example one or more bodies only. For that I lock the view representation. Usually I have more than 3 of them. The part can have different configurations. The problem is that when a new solid is made, it will be visible in the locked view representations also. I thought the lock option should work in the same way like for assemblies, because if you lock the view in an assembly new parts wont be visible.
AIP 2014
Windows 7 x64
Dell Precision T7400 Intel(R) Xeon(R) CPU X5472 @ 3.00GHz (4 CPU's), 8Gb RAM, NVIDIA Quadro FX 5600 1536MB GDDR3
View 5 Replies
View Related
Oct 10, 2013
I have a macro to change the thumbnails of a part, but my parts have not always the "Master view" active.
How can I activate a view by code? Get control of your sheet metal files at [URL]
View 1 Replies
View Related
Oct 26, 2011
Is it possible to show hidden lines in one part of a .idw view while the rest of the view does not show hidden lines? In the attached image I want to show the pull handle and towel bar through the glass in the door. The only way I know how to show this currently is to turn off the visibility on the glass.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 2 Replies
View Related
Feb 26, 2013
Is there any way while using position views to have a part that is adaptive resize? It's easy enough in master view to change placement of parts and have adaptive parts update, but when I try it with position views, the parts will not adapt. Can it even be done with a positional view?
Right now I am using position views and level of detail to suppress two different parts, when I would prefer the same part just update in size. I need the position views so i can show different positions without making new assemblies, but cant get the adaptive parts to work in a positional view.
I just want two parts to move position, and the part between them to update in size depending on the distance. Easy in master view, and so far undo able in position views.
View 5 Replies
View Related
Apr 22, 2013
I have Inventor 2012. When I open a file of a part or assembly that had been modeled the piece is displayed not centered nor fully visible. I have changed the document settings for modeled part to make the displayed area larger that the default 3.937" wide x 1.969" high which sort of works sometimes.
The model Origin seems to be centered while the modeled part is displayed off the screen. Is there a setting to have the model file open with the geometry extents displayed and centered? The thumbnail for the file looks correct. It seems like the template files would control this feature.
View 8 Replies
View Related
Jul 10, 2012
When placing or creating a new part in an assembly it is visible in every view rep which is a huge pain the proverbial.
Is there a setting to tell Inventor to only make newly inserted/created parts visible in the active view rep.
I am so tired of having to go through all my view reps every time I add a new part to an assembly.
View 4 Replies
View Related
Mar 8, 2013
I have a cylindrical shaft passing through a bearing. I have a section view showing a cut-away of half of the shaft and bearing. Automated hatching results. I bring the bearing out of the section view (Rclick > Section Participation > None), and the hatching of the shaft remains visible, through the bearing. An image of this is shown below:
I would like to hide that hatching that shows through the bearing, so that it looks like the image below:
How can this be done?
View 8 Replies
View Related
Dec 27, 2012
Seeing that creating axonometric views is possible in a 2D drawing view, how to create and save a customized axonometric view in the 3D modeling environment?
Currently the only options are front, back, top, bottom, left, right, isometric and random...
View 4 Replies
View Related
Dec 1, 2011
I have an assembly with a subassembly in it. The subassemblies bom structure is set on Normal so that the subassembly number shows on the main assembly BOM and not the individual parts.
However when I place the parts list on the .idw of the main menu it keeps on selecting the parts structure for the BOM, I need it to select the structured view. How do I get it to select the structured view on the BOM so that the BOM does not show the individual parts of the subassembly?
I have made sure that the parts view on the BOM in the source assembly is disabled.
View 4 Replies
View Related
Oct 18, 2012
Inventor 2013 sp1
i want to control the scales of my idw views based on the parts size.
Heres a short intro to what we do, using design assistant we copy an existing project to a new project folder and start designing using the old project as a "template" for the new job.
So, lets say the project i just copied has a part that is 100" "tall", on my drawing sheet the view scale is set to .05 and the view fits nicely on our 8 1/2x11 portrait layout.
Now, the new project's part is only 24" "tall" and using a scale of .05 is no good at all, i need to scale the view up so it will fit nicely in the same layout. This also applies to the associated detail and section views that are on the same sheet.
OK then, Im thinking there should be a way to say if dimx is >=100 then view scale is x and so on if the part is smaller and i would like to do this with the details/sections.
As the pics show, when i change to a smaller size/dia, the views scale needs to be increased. How can this be done... (we do not use vault)
View 1 Replies
View Related
