In AutoCad 2012 I have a large drawing with 30000 entities in it. Most times (althoguh not always), after saving, the crosshairs then vanish and I have to exit the drawing and open it again to get them back.
It doesn't happen in all drawing files, as far as I can tell it is just this large one.
on newer drawings ( amonth or two old) my crosshairs disappear in paper space (model space is fine)....but on older drawings (some are years old) the crosshairs works fine. neither the older or newer drawings were started by me so i can;t be sure of how they were set up, but (i think) it must have something to do with the way these newer dwgs were set up.
i was using C3D 2011 when the issu started and upgraded to C3D 2013 and i still have the issue. I've loaded the latest service pack but no change.
C3D 2013
windows 7 pro
service pack 1
64 bit
intel xeon 3.07 ghz
12 gb ram
Settings: Inventor 14 - Student version / Window 7 64bit
When I save parts in the library on my harddrive the file does not show subsequently. But if I try to re-save it, I get the statement that the file already exist.
I cannot find the file anywhere, not even with the windows search function. The file is missing, but somehow present below the surface.
Besides this did Inventor create several versions of my previous parts (0001, 0002, 0003... etc.)
Why do "Quick Profiles" disappear after I save my drawing?
Civil 3D 2007, SP1
Dell Optiplex GX620
XP Pro SP2, Intel P4 3.4 Ghz, 2 GB RAM
256 ATI Radeon X600 Dual Display
I just installed AutoCAD 2010 Civil 3D on a 32 bit Windows 7 machine. When I open a dwg sent from a surveyor I can see and manipulate all the linework, contours, points, and SRF breaklines in the drawing. When I proceed to save the file to my computer and reopen it, the contours and points disappear; however all linework and surface breaklines remain. The two files that I have been working with were saved originally in 2004 and 2007 format. I have tried saving to their respective versions but that has not worked.
The only way that I have been able to retain these objects is by first exploding them and making them into a block and later inserting them into the other drawing. If I try to make them into a block without exploding them they also disappear.
Is there a way to retain all drawing objects directly from saving?
I used the Block Properties table in dynamic block editor. I picked 3 out of 6 atributes to include in the Block properties table and I inserted the predefined values. When I view the block in testblock edditor everything works. Everything works also in the same drawing were the block was created. I can choose the predefined block vallues from the dropdown list.
The problem is that when I save the block in the block edditor as new drawing, for the purpose to use this and include this block in another drawing, then the attributes witch were associated with the Block Properties table are missing. They are also missing when I open the block editor in the new drawing. The attributes that were not associated with the table exist.
I have added 2 files. 1 with the block created in the same drawing and another where the block was saved an inserted to a new drawing.
I just completed my first topo using Civil3D 2013 (yay!) and now I want to send it to a client. However, when I save it as an ACAD 2007 file and go to open it using ACAD 2007 the spot elevations and all text and symbols associated with them disappear. I can't imagine that you have to have Civil3D to view a Civil3D file. Is there something I can do here?
I did not create a survey database with these points, just imported the .txt file from the field.
My layers disappear when I try to save in Photoshop CS6. They disappear when I get to the last step before saving(where you can select the quality and stuff). The effects stay, but they become kind of crappy. I was just working on some pictures one by one, and then suddenly, it started happening. I did nothing differently.Reinstalling didn't work either.
View 10 Replies View Relatedway to commit layer effects? I try and save a jpeg, png, tiff (without layers), etc. the effects disappear.
View 13 Replies View RelatedIs there a way to commit layer effects? Every time I try and save a jpeg, png, tiff (without layers), etc. the effects disappear. What causes this and is there a way to fix this?
View 1 Replies View RelatedI started using GIMP on a PC a couple of months ago after developing skills in PS over the years on my Macs at home and at work.
I like GIMP and it's stable nature along with everything else... in addition to allot of standard photo editing and graphics creation, I recently used it for some of the animation filters, which are nice.
The only problem I'm having is that when I create a path, or multiple paths, and have them in the paths palette, after I save and close the file that contains the paths, the next time I open that file my paths are gone... completely disappeared.
Cropping and saving makes my images disappear in CS5 Extended
View 4 Replies View RelatedI have work to do on a bathroom group that is rotated at 18 degrees. How do I rotate my crosshairs to make this easer to work on?
View 4 Replies View RelatedI was drafting away, and all of a sudden my crosshairs and pickbox disappeared. Once I move the mouse there's nothing in my drawing plane. I can type commands, and when I move the mouse up to the menu area I can pull down menus. I've opened up other drawings and the crosshairs and pick box are there.
What can I do to resolve this? Of course it happens during a deadline.
Using Autocad version 2009, windows 2007, Professional
I opened a multi-tab CAD document, and my crosshairs disappear when I go into a viewport from paperspace. I can still select things, but I can't see what I'm selecting because the crosshairs are gone! The viewports in the other tabs are fine, I can see my crosshairs in those. I've looked for some setting that accidentally got changed, but can't figure it out. I'm running AutoCAD 2010.
View 9 Replies View RelatedMy crosshairs are not moving smoothly in my workspace. They are jumping big spaces. I typed "snap" and click "OFF" but it had not effect. I can't click on objects.. or draw from.. my mouse moves smoothly in every other application of my computer..just not in CAD workspace.
View 9 Replies View RelatedI have recently been fighting an override of some sort that doesn't want to go away. As an example, for basic copy command, I would normally select my object to copy, type C, hit the space bar, and select my object again to copy to new location. With this override, I select my object, type C, hit the space bar, and in the command line, this appears:
Command: c COPY 1 found
Current Settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] : c
when working at this workstation, the crosshair gets very 'Jumpy' and slow as it gets near or cross over a dimension line. is there possibly a setting that is on or off that is causing this. It has nothing to do with the file. It happens on any file on this computer, but if i switch to a different workstation all is well. And this is a much faster workstation than the other. The issue also happens to a much lesser extent when crossing any drawing object. The cursor (crosshairs) will pause slightly. It is a very long pause when near the dim lines though. it is almost impossible to select or snap to an object or line if it is near a dimension line.
View 9 Replies View RelatedI am working with files from an architect and when I open a file with xrefs they all have these big crosshair/boxes all over them. I can choos edit in [lace and delete the crosshairs but there are a lot of xrefs and it will take for ever. They are not on the original drawings that I can see. One with crosshairs and one without.
View 2 Replies View RelatedI have a co-worker that wants to rotate the UCS ICON and the CROSSHAIRS in model space but not the actual view on the screen. On my machine this is what it does when I use the UCS command. On their machine it rotates everything. Is there a "variable" that controls this?
View 3 Replies View RelatedI work on a mac and run parallels for autocad. My issue is while working the autocad the crosshairs drag behind my hand movement. when the pointer is moving thru menus it works fine and when i go back to the work space the crosshairs drag behind.
View 5 Replies View RelatedMoments ago my crosshairs in the model space decided to rotate. I tried to undo, but apparently the damage is done.
I came across a thread on another website about trying UCS, world & plan etc which I tried.
While this did rotate my crosshairs to be straight and normal again, it rotated all of my drawings I have numerous sections on the page and unfortunately they all became rotated.
Is there a way to rotate the crosshairs and not change my drawing?
why my crosshairs stutter after I select an object? I first noticed it after the AutoCAD release that added vertex control options to plines. Crosshairs hang for a second or two after selecting an object that has vertices. Seems like CAD is evaluating the vertices.
View 4 Replies View RelatedWe have just installed ACA 2012 on one of our workstations and randomly the crosshairs will disapear in paperspace. We will still get the cursor icon if we hover over properties and paletts etc. We have the latest service pack and ribbon hotfix. Searching hasn't come up with much.
View 4 Replies View RelatedWhen I open ACAD A14, the workspace is displayed black (I had it set on white). When I zoom out, the screen is white again, but when I move the cursor, the crosshairs are displayed as a black square and leave a black trail, like for example Internet Explorer on the old Windows systems. I can use all functions normally, however my drawings are not properly displayed through the black. I had it running today already, without any problems, but my laptop was not connected to the internet, now it is. Things I tried: Reinstalling AutoCAD Restarting my PC Disconnecting my laptop from the internet and reopening AutoCAD A screenshot is attached. I am a first semester student and the plan is for a supporting structure of a hall that is due on friday, so its nothing that takes up a lot of computing power or anything.
View 1 Replies View RelatedI recently installed AutoCAD 2012 and have noticed that my crosshairs are moving as if a grid is turned on. I checked my settings and have turned everything off however, the crosshairs continues to move in "jerk-like" movements.
How do I change this?
On occasion when on a layout tab and making a few changes in model space and I preview while model space is still active, crosshairs disappear when I exit preview. So I then save, close and reopen, it is then back to normal.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
One of my co-worker has this problem with his cursor's crosshairs. When he moves his cursor the crosshairs are like blinking or sort of flashing. It's not that big of a problem but it's just getting anoying in a short while.
View 9 Replies View RelatedWhen I insert a X-ref overlay, everything seems to work, but giant cross hairs with a circles appear dotted all around on the X-refed drawing, similar to spot levels (minus the hatch).
Attached an image X-ref image.jpg
How to stop this or why it seems to be scaling up the crosshairs .
I am using an ati 6950. (yes i know its not a suggested card) but it runs great other than after 20minutes to an hour worth of use it will freak out when you hover over an object and that object turns to dashed lines. The crosst hair will turn into like 50 diagonal lines and start smearing on the screen. I went in and changed to options from DASH to THICKEN on hover. This has been working for about an hour now.
View 3 Replies View RelatedI have a large drawing with 5 meter contours that are 2D polylines on elevation. In Civil 3D 2012, when the crosshairs touch a polyline the drawing hangs for quite awhile. I've cut a piece out of the drawing so it is 28mb instead of 121mb and now the hang time is much less but it still does it. It does not happen in AutoCAD 2012.
Windows 7 x 64
Intel i7-4770 CPu @ 3.40 GHz
24 GB RAM
NVIDIA Quadro K2000D
Civil 3D 2014 (i.108.0.4, SP1)