AutoCAD LT :: Crosshairs Get Slow And Jumpy Near Dim Lines?
Apr 29, 2009
when working at this workstation, the crosshair gets very 'Jumpy' and slow as it gets near or cross over a dimension line. is there possibly a setting that is on or off that is causing this. It has nothing to do with the file. It happens on any file on this computer, but if i switch to a different workstation all is well. And this is a much faster workstation than the other. The issue also happens to a much lesser extent when crossing any drawing object. The cursor (crosshairs) will pause slightly. It is a very long pause when near the dim lines though. it is almost impossible to select or snap to an object or line if it is near a dimension line.
I am using an ati 6950. (yes i know its not a suggested card) but it runs great other than after 20minutes to an hour worth of use it will freak out when you hover over an object and that object turns to dashed lines. The crosst hair will turn into like 50 diagonal lines and start smearing on the screen. I went in and changed to options from DASH to THICKEN on hover. This has been working for about an hour now.
When I am in ISO view and chose anything other than wireframe, like "Realistic" panning and zooming are very slow. Even a smaller drawing does not act normal. I use a 3rd party software for modeling ductwork and piping, the drawings work fine on our other machine, so it's not the modeling software. It's also not the drawing file, I have tried other drawings that I had no past issues with but it still bogs down.
I have tried the following:
Updated video driver.
Tried different settings under "Options" "Display" and "3D Performance"
Ran AutoCad repair.
Checked and turned off all snap settings and grid.
AutoCad 2011 Intel Core i5 3.60 GHZ 16GB ram Windows 7 Profesional 64 bit NVIDIA Quadro FX 1800
I have Corel VideoStudio Ultimate X6 and am having problems rendering clips in slow motion.
I have recorded at 50p in full HD. In Video Studio I have slowed the clips down to 25%, and when I do a preview in the editor, it looks fantastic. However when I render to a MP4 file it looks terrible. You can see every frame.
How do I render and get at least the same quality as I get in the preview window?
Here is the video I am talking about. [URL]...... through to about 30 seconds to see the jumping.
I work on a mac and run parallels for autocad. My issue is while working the autocad the crosshairs drag behind my hand movement. when the pointer is moving thru menus it works fine and when i go back to the work space the crosshairs drag behind.
im currently using Autocad 2013 and it is running painfully slow when drawing lines and copying lines and objects... my experience on autocad is very minimal and how to speed things up a bit. also icons appear next to lines when i join 2 or more line, one for each join, but i suspect they may also be causing my drawing to lag.
My aperture / crosshairs seems to have a magnetic attraction to all objects in drawings. Over an empty area, motion is smooth. When crossing over any object(s), be they in Model Space or a Layout, the cursor is attracted to objects. Is this an AutoCAD setting that I'm not aware of, or is this a graphics card / hardware acceleration issue?
I have a sluggish jerky cursor (and it’s not the operator) when you are NOT in a command and while you are creating your selection set in the command. The cursor jumps and reappears @ ~1 sec intervals so you have to anticipate your mouse move to do anything. OH...and it's only happens in model space.
I tried several settings I found on the internet but nothing works. It's only doing it in 3 drawings right now. The latest one was working fine until ~10:00 this morning, then it started in...no issues before this.
It really makes AutoCAD 2011 basically unusable as it takes 5X longer to complete each command!
I am using AutoCAD 2011. I am taking an ellipse from CAD and converting to DXF and then placing the DXF into a CNC program (Partworks). When the program is run on the CNC router the ellipse is segmented. I have worked with the CNC program and know that the problem is in the CAD or DXF programs. If you can change the size of the segments of an ellipse when it is created or if there is something else I can try?
I am testing out ACAD LT 2013 I've narrowed it down the the hatch. why theres no issue with Autocad LT 2010 using the same hatch pattern. Tried making the adjustments. Turning off the hatch is really working the best
Running Win 7 , 64 bit quad core AMD 2.2 gig processor 4gig ram Gigbyte MB with on board graphics
i am trying to do this in gIMP. The closest i can get is checking angle/direction in the dynamic editor but it doesn't quite look right at all. Almost, but no. It is almost like the lines are lagging or slow to pick up on my mouses direction? If that makes any sense. i want it to look exactly like that video or if you don't want to watch it, a treasure map effect.
I've been using the CC version of AE on my MacBook Pro since the evening it came out and all seemed similar to previous AE versions on my home and work Macs, but I just switched to a high-powered Windows workstation and was surprised to see how indexed (not smooth) the CTI was on RAM-Preview. I couldn't care less about UI animation except that it is pretty distracting when watching animations play back aa there is a vertical red line jumping 15 frames at a time. The playback is smooth and previews aren't set to skip frames.
Why is this behavior so different than the OSX version? Can I fix it?
I was drafting away, and all of a sudden my crosshairs and pickbox disappeared. Once I move the mouse there's nothing in my drawing plane. I can type commands, and when I move the mouse up to the menu area I can pull down menus. I've opened up other drawings and the crosshairs and pick box are there.
What can I do to resolve this? Of course it happens during a deadline.
Using Autocad version 2009, windows 2007, Professional
I opened a multi-tab CAD document, and my crosshairs disappear when I go into a viewport from paperspace. I can still select things, but I can't see what I'm selecting because the crosshairs are gone! The viewports in the other tabs are fine, I can see my crosshairs in those. I've looked for some setting that accidentally got changed, but can't figure it out. I'm running AutoCAD 2010.
My crosshairs are not moving smoothly in my workspace. They are jumping big spaces. I typed "snap" and click "OFF" but it had not effect. I can't click on objects.. or draw from.. my mouse moves smoothly in every other application of my computer..just not in CAD workspace.
In AutoCad 2012 I have a large drawing with 30000 entities in it. Most times (althoguh not always), after saving, the crosshairs then vanish and I have to exit the drawing and open it again to get them back.
It doesn't happen in all drawing files, as far as I can tell it is just this large one.
I just rendered a video slide show that liberally uses pan and scan zooming for every photo and it looks like garbage. It's jumpy and jerky with almost every pan and scan. I used the highest mpeg conversion quality but didn't mess with much else. Is there something I can do to make it not do that? It seems like it gives you the option to use a different mpeg rendering engine if you want...
What a drag. It took me 2 weeks to put this thing together and the final version looks like crap.
I have recently been fighting an override of some sort that doesn't want to go away. As an example, for basic copy command, I would normally select my object to copy, type C, hit the space bar, and select my object again to copy to new location. With this override, I select my object, type C, hit the space bar, and in the command line, this appears:
Command: c COPY 1 found Current Settings: Copy mode = Multiple Specify base point or [Displacement/mOde] : c
I am working with files from an architect and when I open a file with xrefs they all have these big crosshair/boxes all over them. I can choos edit in [lace and delete the crosshairs but there are a lot of xrefs and it will take for ever. They are not on the original drawings that I can see. One with crosshairs and one without.
I have a co-worker that wants to rotate the UCS ICON and the CROSSHAIRS in model space but not the actual view on the screen. On my machine this is what it does when I use the UCS command. On their machine it rotates everything. Is there a "variable" that controls this?
Moments ago my crosshairs in the model space decided to rotate. I tried to undo, but apparently the damage is done.
I came across a thread on another website about trying UCS, world & plan etc which I tried.
While this did rotate my crosshairs to be straight and normal again, it rotated all of my drawings I have numerous sections on the page and unfortunately they all became rotated.
Is there a way to rotate the crosshairs and not change my drawing?
I’ve been using very happily been using x2 for a number of years to make a lot of movies from my standard definition camera, I’ve loved the programme, and it has generally been able to do everything I wanted, and made for an enjoyable editing process. However, the camera has finally given up and I’m now going down the HD route, and the old x2 version just keeps crashing with any new clips. So I have recently downloaded the trial version of x5 (5 days of trial left), with the intention of trying it out and then purchasing it.
Unfortunately however I have found it to be jerky and jumpy when editing clips together, particularly when using the overlay tracks, the more overlays the worse it gets. This happens when I want to watch the edit, and while the sound runs ok the video just freezes on a frame then jumps ahead a few seconds and freezes etc etc. Impossible to watch and edit to really.
I am using the smart proxy to get the files to a manageable size, and I can see the separate proxy files in explorer. Smart proxy enabled. I have all the acceleration on that can go on (the ”Enable Hardware Encoder Acceleration” is greyed out so I can’t tick it). When I share/render the movie it comes out just fine, so it’s only with the editing process that is jumpy. I have really enjoyed x2, and could get good results really quickly, and I enjoyed the editing interface and process with Corel VS, but am now thinking I might need to change to a different video editing programme.
Computer- HP Elitebook 8560w Everything is just running off the laptop’s hard drive. I’ve installed The CVS x5 Service Pack 1
The project has only two clips – the first from a canon d550 as below
why my crosshairs stutter after I select an object? I first noticed it after the AutoCAD release that added vertex control options to plines. Crosshairs hang for a second or two after selecting an object that has vertices. Seems like CAD is evaluating the vertices.
We have just installed ACA 2012 on one of our workstations and randomly the crosshairs will disapear in paperspace. We will still get the cursor icon if we hover over properties and paletts etc. We have the latest service pack and ribbon hotfix. Searching hasn't come up with much.
When I open ACAD A14, the workspace is displayed black (I had it set on white). When I zoom out, the screen is white again, but when I move the cursor, the crosshairs are displayed as a black square and leave a black trail, like for example Internet Explorer on the old Windows systems. I can use all functions normally, however my drawings are not properly displayed through the black. I had it running today already, without any problems, but my laptop was not connected to the internet, now it is. Things I tried: Reinstalling AutoCAD Restarting my PC Disconnecting my laptop from the internet and reopening AutoCAD A screenshot is attached. I am a first semester student and the plan is for a supporting structure of a hall that is due on friday, so its nothing that takes up a lot of computing power or anything.
I recently installed AutoCAD 2012 and have noticed that my crosshairs are moving as if a grid is turned on. I checked my settings and have turned everything off however, the crosshairs continues to move in "jerk-like" movements.
On occasion when on a layout tab and making a few changes in model space and I preview while model space is still active, crosshairs disappear when I exit preview. So I then save, close and reopen, it is then back to normal.
Civil3D 2013 Windows 7, 64 bit Intel i7 2600 @ 3.40Ghz 16 GB RAM Nvidia Quadro 600
One of my co-worker has this problem with his cursor's crosshairs. When he moves his cursor the crosshairs are like blinking or sort of flashing. It's not that big of a problem but it's just getting anoying in a short while.
