VideoStudio :: Slow Motion Rendering Is Jumpy?
Jun 19, 2013
I have Corel VideoStudio Ultimate X6 and am having problems rendering clips in slow motion.
I have recorded at 50p in full HD. In Video Studio I have slowed the clips down to 25%, and when I do a preview in the editor, it looks fantastic. However when I render to a MP4 file it looks terrible. You can see every frame.
How do I render and get at least the same quality as I get in the preview window?
Here is the video I am talking about. [URL]...... through to about 30 seconds to see the jumping.
View 3 Replies
ADVERTISEMENT
Oct 4, 2010
I have the DSLR 7D and it has these wonderful 720/50p module which could offer some amazing slo-mo, if you use it. Is this possible to do with my program, or do I need a better program like Vegas from Sony?
View 2 Replies
View Related
Nov 23, 2011
I am currently filming with Panasonic TM700 1080 50P. I want to creat a slow motion video. I know FCP Cinema Tool can change 50P to 25P slow motion.
Is there any way that I can do this with Video Studio Pro X3.
View 4 Replies
View Related
Sep 19, 2013
I am a user of VS X4 Pro but I have not used it for a long time until now...
When I loaded a video from my camera into the library and from there into the timeline I got a problem. When editing in clip-mode the clip appears in slow motion with a noisy sound! When running in Project-mode the clips appear OK. When rendering the result is OK but it is difficult not to work normally in clip-mode.
What can be the problem? Have I changed by mistake any parameter in preferences? I can´t remember that I have had those problems before...
View 3 Replies
View Related
Dec 26, 2012
Using Videostudio Pro X5. Captured video using GoPro at 240fps. Video imports fine. I want to edit the video in slow motion. I'm using the "speed/time lapse" option - I set the speed at "25%".
However the outcome is that the video is choppy as if it's throwing away frames. At this setting I should be getting decent smooth frame rates but this is not the case. I'm looking to end up with at least 25-30 fps.
View 7 Replies
View Related
Mar 6, 2012
Is there a way to apply slow motion to just a couple of seconds or so of a clip without having it apply to the whole clip?
View 3 Replies
View Related
Jun 27, 2011
I experimented with slow motion of a water fall video clip from Letchworth State Park of New York where we visited recently. The original clip is 1080p24fps. I used virtualdub, avisynth, mvtools method to change the video clip from 24fps to 96fps, and 144fps. This method smoothly builds additional frames between each of the 24fps appropriately and the method works great to create smooth slow motion that plays in VLC slowing the 96 and 144 clips fluidly slow. Inserting the three clips into VS works fine and play normally. Selecting the inserted 96fps clip, and slowing it by 25% plays jerky, and renders as 1080p24fps the same way. Same situation with the 144fps clip. I played with all the parameters: frame and % and I could not make VS X4 play the clips smoothly. I am hoping I don't understand how to use this new Time lapse/Speed feature. BTW, I also own Premiere Pro, and it does the slow down of these clips perfectly. You can see the three clips in VIMEO done with Premiere Pro: [URL]
EDIT: I just tried Microsoft Movie Maker that comes free from Microsoft, and it does the slow down correctly. I am thinking this is a problem with VS X4
View 3 Replies
View Related
May 13, 2012
I created a 30min video, with a lot of photos mixed with live video, transitions, music, etc. Now, when I try to reopen the file for futher editing, it appears the software needs to re-render all the thumbnails in my video track stream. As I mentioned, I have a lot of photos in there, so it's taking forever.
With the previous software I used (Pinnacle Studio), I could flush the cache and have the program rebuild (and store) all the thumbnail info for faster loads in subsequent sessions.
View 7 Replies
View Related
Apr 29, 2009
when working at this workstation, the crosshair gets very 'Jumpy' and slow as it gets near or cross over a dimension line. is there possibly a setting that is on or off that is causing this. It has nothing to do with the file. It happens on any file on this computer, but if i switch to a different workstation all is well. And this is a much faster workstation than the other. The issue also happens to a much lesser extent when crossing any drawing object. The cursor (crosshairs) will pause slightly. It is a very long pause when near the dim lines though. it is almost impossible to select or snap to an object or line if it is near a dimension line.
View 9 Replies
View Related
Sep 19, 2012
When I am in ISO view and chose anything other than wireframe, like "Realistic" panning and zooming are very slow. Even a smaller drawing does not act normal. I use a 3rd party software for modeling ductwork and piping, the drawings work fine on our other machine, so it's not the modeling software. It's also not the drawing file, I have tried other drawings that I had no past issues with but it still bogs down.
I have tried the following:
Updated video driver.
Tried different settings under "Options" "Display" and "3D Performance"
Ran AutoCad repair.
Checked and turned off all snap settings and grid.
AutoCad 2011
Intel Core i5 3.60 GHZ
16GB ram
Windows 7 Profesional 64 bit
NVIDIA Quadro FX 1800
View 2 Replies
View Related
Mar 21, 2013
can simple fade into slow motion or fade out of the effect ?
View 5 Replies
View Related
Jun 5, 2012
I just rendered a video slide show that liberally uses pan and scan zooming for every photo and it looks like garbage. It's jumpy and jerky with almost every pan and scan. I used the highest mpeg conversion quality but didn't mess with much else. Is there something I can do to make it not do that? It seems like it gives you the option to use a different mpeg rendering engine if you want...
What a drag. It took me 2 weeks to put this thing together and the final version looks like crap.
View 2 Replies
View Related
Jun 24, 2012
I’ve been using very happily been using x2 for a number of years to make a lot of movies from my standard definition camera, I’ve loved the programme, and it has generally been able to do everything I wanted, and made for an enjoyable editing process. However, the camera has finally given up and I’m now going down the HD route, and the old x2 version just keeps crashing with any new clips. So I have recently downloaded the trial version of x5 (5 days of trial left), with the intention of trying it out and then purchasing it.
Unfortunately however I have found it to be jerky and jumpy when editing clips together, particularly when using the overlay tracks, the more overlays the worse it gets. This happens when I want to watch the edit, and while the sound runs ok the video just freezes on a frame then jumps ahead a few seconds and freezes etc etc. Impossible to watch and edit to really.
I am using the smart proxy to get the files to a manageable size, and I can see the separate proxy files in explorer. Smart proxy enabled. I have all the acceleration on that can go on (the ”Enable Hardware Encoder Acceleration” is greyed out so I can’t tick it). When I share/render the movie it comes out just fine, so it’s only with the editing process that is jumpy. I have really enjoyed x2, and could get good results really quickly, and I enjoyed the editing interface and process with Corel VS, but am now thinking I might need to change to a different video editing programme.
Computer- HP Elitebook 8560w
Everything is just running off the laptop’s hard drive. I’ve installed The CVS x5 Service Pack 1
The project has only two clips – the first from a canon d550 as below
640x480 MOV
24 bits, 1848 frames
25.000 fps
73.92 secs
And the other from the net as below
MPEG-4 file
2890 KB
H 264 High Profile Video
989 frames
24 bits 640x480 4:3
30 fps
605 Kbps data rate
Project Properties
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Upper Field First
(DVD-PAL), 4:3
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
View 2 Replies
View Related
Dec 4, 2013
When I switch the display mode from "Wireframe" to "Realistic" or "Shaded" a strange thing happens.Whenever I make a change (say, position, size or color), the change can't be seen in real time. I have to use my middle button to either zoom or move my point of view, and then the viewport snaps to the change I made.
Also, when I change the color of the object, it takes very long (and in a fade in way) to turn to the desired color. Here again, I have to move around the object to see the real change take effect.How do I fix this so that I see the changes in real time?
View 1 Replies
View Related
Dec 30, 2013
Just as the headline says. I shot a wedding and accidently forgot to change the frame rate (Sony AVCHD, if it matters). I need the clip to get to 24fps without using slow motion (I need it to look real time) and I need the audio from the clip as well. So, clearly going to Interpret Footage>Frame Rate won't work because the audio and film slow down. Even unganging it as instructed by Adobe in the manual doesn't work quite right.
View 1 Replies
View Related
Jan 30, 2012
I have an animation of a wine glass breaking. I simulated it using mass FX and particle flow. I will import it to After Effects, add finishing touches and render out a super slow mo clip like you would see on Discovery HD or Time Warp. In essence, I want it to look like it was shot on a high speed camera.
I tried a test render out of max at 960 fps and importing into AE at 25fps but the results aren't quite white I want.
My question is, what frame rate do I render the animation out inside 3ds max and what frame rate do I import/interpret it in After Effects?
View 3 Replies
View Related
Sep 28, 2013
I have a video I’ve edited (text captions etc) in CS6 - Can I somehow slow it down ie create a slow motion effect and then export that?
View 6 Replies
View Related
Dec 17, 2011
i have a red file to 120 fps and convert a Pro Ress File. i want a more slow!
View 1 Replies
View Related
Apr 5, 2012
I'm editing a music video, when apply time warp a one shot for example 25% for slow motion , the shot repeat the last frame, 4 frames.
View 4 Replies
View Related
Jun 17, 2013
My imported avi file plays in slow motion and staggers. just started AE but pretty ok with Photoshop. its AVCHD , 50 frames per second
View 7 Replies
View Related
Dec 31, 2012
i an having trouble accessing this function. I have CS6 (windows) and i can't access the 'speed/duration sliders' to slow down my clip to look like its in slow motion. I know this can be done
View 3 Replies
View Related
Dec 3, 2012
Is there a way to "render every Nth Frame" with a value of 0.5 oder 0.25 ?
To create a slow motion of the complete sequence without to use rescale time?
View 1 Replies
View Related
Feb 25, 2013
How do I increase cs6 3D rendering speed
View 1 Replies
View Related
Jun 6, 2012
I have a notebook with specification as mentioned below :
Lenovo Ideapad Y470P 2nd generation Intel Core i7-2670QM Processor( 2.2GHz 1333MHz 6MB) Windows 7 Ultimate x64 AMD Radeon HD 7690 2GB 8.0GB PC3-10600 DDR3 SDRAM 1333 MHz 750GB 5400
I'm using Adobe Photoshop CS6 (64 Bit) for doing my job.Right now, i have a task to create a banner with dimension 800 x 900 Centimeters with Resolution 300 DPI and Color Mode RGB 16 Bit.The file size when blank is about 56.1 GB.The problem is, when i add some text with Horizontal Type Tool and click on the Move Tool, the Rendering Type screen show up and take a very very long time to finished.
I have made some configurations to my Photoshop that i found on Adobe Forum, but the problem still persisted.
Some configurations that i've made is :
- Turn off the Automatically Save Recovery Information
- Set Maximize PSD and PSB File Compatibility to Ask
- Set the Memory Usage to 95%
- Set the Cache Levels to 8 and Cache Tile Size to 1024K
- Set the Graphics Advanced Settings to Drawing Mode Advanced, and Check the option Use Graphics Processor To Accelerate Computation, and Uncheck the option Anti-Alias and 30 Bit Display
- Set the Scratch Disk to another partition ( C:System D:PageFile E:Data F:Scratch Disk)
And after all of that configuration, my Photoshop still slow when Rendering Type.
View 9 Replies
View Related
May 27, 2012
Rendering video in new Photoshop Cs6 is very very very slow!!
Example:
(test on iMac intel 3,2 Ghz i3, 8gb Ram, 512 Mb video Radeon, 1Tb Hd)
1:40 (min:sec) video (no effect, no levels, only cut 5 sec.), rendering video (H.264 high quality) in 15 minutes!!!!!!!!!
Simply unusable.
View 4 Replies
View Related
Jul 30, 2013
i have the imac 27 680mx 32gb ram,when i render on cs6 takes very long time, the first one takes 8-10mins,when i do the second time its very fast 30seconds
View 7 Replies
View Related
Jan 13, 2014
It used to be that when rendering a timeline, there would be no lag between rendering the first and second videos. Now, between each video there is about a 30 second transition before the next video begins rendering. Anything that would have caused this, or is there anyway to prevent it? If I am rendering a timeline with 60 clips that need rendering, this can add a significant amount of time.
View 1 Replies
View Related
Sep 18, 2013
I just checked whether the update to 5.2 would improve speed of rendering images in the Develop module for Nikon D800 NEF files but alas, LR is still taking its time to render images and going back and forth between two or more D800 NEF files to check focus at 100% magnification remains an excercise in meditation....
I had initially hoped that the move from LR 4.x to LR 5 would improve things but this wasn't the case - so when will Adobe finally catch up with the development in cameras with ever bigger files? The Nikon D800 came out one full year ago...
View 3 Replies
View Related
Jul 29, 2013
Slow rendering image previews in import dialogue?
My LR 5 is as slow as a snail generating those previews.
Importing my RAWs form the EOS 6D (saved on a 95MB/s 32 BG SanDisk Extreme Pro) it renders only the 12 or 24 displayed previews and leaves out the rest (the next only when I'm scrolling down). For 12 images LR5 needs 8-10 seconds. LR4.4 does the same process for all 150 RAWs in 1-2 seconds.
It doesn't matter if I want to import to my workstation (Dell Precision T1650, 8core Intel Xeon E3-1240 V2, 16GB RAM, 64bit) via USB 3.0 (Reader & Port) or to my laptop (Dell Latitude E6400). So it must be LR, not my hardware.
Are there known issues with the Canon-RAW format? I just updated EOS firmware to 1.1.3, but the renderspeed stays the same. For 1 image 3-4 seconds single...
View 1 Replies
View Related
Feb 9, 2013
I have a question concerning Adobe Dynamic Links.
This is my problem : I work on After Effects. I have a composition that is rendered quite fast. (almost in real time...)
But when I open the linked comp in Premiere Pro, it lags as hell. Maybe 2x, 3x slower.
So I'd like to know why Adobe Premiere Pro is slow, while After Effects is fast ?
View 5 Replies
View Related
Jul 30, 2013
that is having really slow performance using AE CS6 or AECC and possibly AE CS5.5 I think i might of found out what the problem is.My System specs are below:
Dell T7600 Dual XEON E5-2687W 3.1/3.8GHz w turbo / Dell M6700 i7 -3940XM 3.9GHz
64GB Ram / 32GB Ram
Nvidia Quadro K5000 / Nvidia Quadro K5000M
Windows 7 x64
Here are the issues I was having
- Really slow performance when scrubbing along the timeline.
- Adaptive Resoltion wasn't working at all super slow previewing
- Multiprocessor rendering not working, or taking forever to start up, and sometimes it would work but still not the way it should it was hit or miss
- Disk Caching not working
- many others that I can't think of at the moment
SOLUTION for slow scrubbing of the timeline for Quad, Six and Eight core systems
Here is what I figured out after hours and hours of testing and configuring. I even went back to AE CS5.5 to see if all these problems existed in that version. Although some did but not all
From what I can tell it looks like certain plugins are not compatible to Quad, Six and Eight Core machines. The main plugin that has the problem is Keylight 1.2 that comes bundled now with CS6 and CC.
If you turn off the plugin on your layers scrubbing the timeline speeds up and works like it should. If you want to use keylight then do the following:
- under screenmatte, set the screen softness to 0
- shrink and grow to 0.
If you use any number other than these settings it causes scrubbing and rendering of the timeline to go extremely slow.
SOLUTION for all the issues above for Quad, Six and Eight core systems
After hours and hours of testing I have come to the conclusion that AE CS6 and CC don't work well with Quad, six and eight core systems in general and especially with the keylight plugin.
FIX: Go into your Bios of your computer and set your multiple core to either 1, 2 cores, theis will give you 2 thread or 4 threads. This will fix all the issues as stated below. I haven't tested 4 cores yet but soon will.
But I know that 6 and 8 cores definitely does not work it causes all the major issues above.
After setting my system to 1 or 2 cores, Ae is extremelly fast and responsive. Timeline scrubbing is super fast now even with keylight 1.2 and all it's settings. Adaptive resolution now works, Multiprocessing starts up
immediately and disk caching is working.
Conclusion
I am not able to set my system to use 8 or all cores in my bios, This causes so many performance issues in AE CS6 and CC and some in even CS 5.5. I need to use either 1 or 2 cores. As you might no this really sucks when I am limiting myself to only 4 threads when I could be using 32 threads. Pleas Adobe look into this issues with these systems that have 4, 6 or 8 core systems. This could possibley just be for Dual core systems too since that is what I have here.
View 5 Replies
View Related
