I have the DSLR 7D and it has these wonderful 720/50p module which could offer some amazing slo-mo, if you use it. Is this possible to do with my program, or do I need a better program like Vegas from Sony?
View 2 RepliesI am currently filming with Panasonic TM700 1080 50P. I want to creat a slow motion video. I know FCP Cinema Tool can change 50P to 25P slow motion.
Is there any way that I can do this with Video Studio Pro X3.
I am a user of VS X4 Pro but I have not used it for a long time until now...
When I loaded a video from my camera into the library and from there into the timeline I got a problem. When editing in clip-mode the clip appears in slow motion with a noisy sound! When running in Project-mode the clips appear OK. When rendering the result is OK but it is difficult not to work normally in clip-mode.
What can be the problem? Have I changed by mistake any parameter in preferences? I can´t remember that I have had those problems before...
I have Corel VideoStudio Ultimate X6 and am having problems rendering clips in slow motion.
I have recorded at 50p in full HD. In Video Studio I have slowed the clips down to 25%, and when I do a preview in the editor, it looks fantastic. However when I render to a MP4 file it looks terrible. You can see every frame.
How do I render and get at least the same quality as I get in the preview window?
Here is the video I am talking about. [URL]...... through to about 30 seconds to see the jumping.
Using Videostudio Pro X5. Captured video using GoPro at 240fps. Video imports fine. I want to edit the video in slow motion. I'm using the "speed/time lapse" option - I set the speed at "25%".
However the outcome is that the video is choppy as if it's throwing away frames. At this setting I should be getting decent smooth frame rates but this is not the case. I'm looking to end up with at least 25-30 fps.
Is there a way to apply slow motion to just a couple of seconds or so of a clip without having it apply to the whole clip?
View 3 Replies View RelatedI experimented with slow motion of a water fall video clip from Letchworth State Park of New York where we visited recently. The original clip is 1080p24fps. I used virtualdub, avisynth, mvtools method to change the video clip from 24fps to 96fps, and 144fps. This method smoothly builds additional frames between each of the 24fps appropriately and the method works great to create smooth slow motion that plays in VLC slowing the 96 and 144 clips fluidly slow. Inserting the three clips into VS works fine and play normally. Selecting the inserted 96fps clip, and slowing it by 25% plays jerky, and renders as 1080p24fps the same way. Same situation with the 144fps clip. I played with all the parameters: frame and % and I could not make VS X4 play the clips smoothly. I am hoping I don't understand how to use this new Time lapse/Speed feature. BTW, I also own Premiere Pro, and it does the slow down of these clips perfectly. You can see the three clips in VIMEO done with Premiere Pro: [URL]
EDIT: I just tried Microsoft Movie Maker that comes free from Microsoft, and it does the slow down correctly. I am thinking this is a problem with VS X4
can simple fade into slow motion or fade out of the effect ?
View 5 Replies View RelatedWhen I switch the display mode from "Wireframe" to "Realistic" or "Shaded" a strange thing happens.Whenever I make a change (say, position, size or color), the change can't be seen in real time. I have to use my middle button to either zoom or move my point of view, and then the viewport snaps to the change I made.
Also, when I change the color of the object, it takes very long (and in a fade in way) to turn to the desired color. Here again, I have to move around the object to see the real change take effect.How do I fix this so that I see the changes in real time?
Just as the headline says. I shot a wedding and accidently forgot to change the frame rate (Sony AVCHD, if it matters). I need the clip to get to 24fps without using slow motion (I need it to look real time) and I need the audio from the clip as well. So, clearly going to Interpret Footage>Frame Rate won't work because the audio and film slow down. Even unganging it as instructed by Adobe in the manual doesn't work quite right.
View 1 Replies View RelatedI have an animation of a wine glass breaking. I simulated it using mass FX and particle flow. I will import it to After Effects, add finishing touches and render out a super slow mo clip like you would see on Discovery HD or Time Warp. In essence, I want it to look like it was shot on a high speed camera.
I tried a test render out of max at 960 fps and importing into AE at 25fps but the results aren't quite white I want.
My question is, what frame rate do I render the animation out inside 3ds max and what frame rate do I import/interpret it in After Effects?
I have a video I’ve edited (text captions etc) in CS6 - Can I somehow slow it down ie create a slow motion effect and then export that?
View 6 Replies View Relatedi have a red file to 120 fps and convert a Pro Ress File. i want a more slow!
View 1 Replies View RelatedI'm editing a music video, when apply time warp a one shot for example 25% for slow motion , the shot repeat the last frame, 4 frames.
View 4 Replies View RelatedMy imported avi file plays in slow motion and staggers. just started AE but pretty ok with Photoshop. its AVCHD , 50 frames per second
View 7 Replies View Relatedi an having trouble accessing this function. I have CS6 (windows) and i can't access the 'speed/duration sliders' to slow down my clip to look like its in slow motion. I know this can be done
View 3 Replies View RelatedIs there a way to "render every Nth Frame" with a value of 0.5 oder 0.25 ?
To create a slow motion of the complete sequence without to use rescale time?
I was wondering if in Photoshop i can add a "Bullet-time effect" which was in Matrix.For example a scene which was shown in slow motion where an Agent was firing at Neo and then Neo dodged bullets and we could actually see effects produced by bullets.Maybe i need to combine some filters/layers.
View 6 Replies View RelatedI am embarrassed to ask such a basic question--but the majority of my media are still pictures for a bridal slide show, and I was wondering how to manually render "pan and zoom" like effects for each photo as the dimensions differ and I want to crop out the extra "black space" from my vertical pictures.
Most of these pics were scanned in at 600 dpi (they are old as the hills), but I also have a crop of jpgs they sent at 92 dpi...
I wish I were more savvy--I JUST purchased Corel Video--having used Roxio products for the past 5 years (wanting to take it up a notch).
I just began using Version X4 of Corel VideoStudio Pro.
I just used it for the first time after upgrading from X3. I rendered a short video and when I tried playing it back the slide moves across the "time bar" BUT there is no motion on the screen. The same when I tried to play it w/Windows Media player.
I started coverting MPEG 4 video to DivX which always worked in X3. No I get no motion at all and no sound. Do I have a bad download?
Within a DVD menu I created a motion menu. However I don't want to have the first clip as introductory video for the motion menu. I unmarked the checkbox named "use first clip as introductory video and added, in the first page of the Share - DVD, the clip that must be played in the motion menu (moved the clip most left).
In the menu itself its now fine when nothing is selected, though when selecting the total video to play, the selected video file of the motion menu starts to play where the first video file (clip) must be played. I know that in the main menu I can select the first clip to play as well but that's exactly what I want to avoid..
I removed all chapters since I don't like to have a sub-menu. Just one overall main menu to play the total video, and in the DVD menu in the motion menu only, I want to see (and not select) the chosen clip.
I have a Canon SX50 HS digital camera that's (in my opinion) a great camera. I don't know if it's a DSLR or not but if it's supported or not to make stop motion videos? Also, why not??? Really??? My webcam works with stop motion but my Canon camera can't? I paid 500.00 for a camera that I can't use with VS Ultimate X6? If not, whats so Ultimate about it?
View 2 Replies View RelatedThe video I am editing is of a school orchestra concert. The players are seated in place, not moving. However, the camera is sometimes panning, so that if the title remains at the same place on the screen, it ends up moving over different heads. I would like the title to remain at the same place in relation to the orchestra, even when the camera pans.
Track Motion could be used to do that, correct?
I tried it, following the directions in the user guide, which seemed quite complex. I set a tracker with track motion (beginning the same time as the title starts), then right-clicked the title and chose "match motion".
After doing that, playing back the project, I now see no title at all on the video. The only way I could see the title again was to "remove motion".
There ought to be a way to do this, but I don't see how: I record forums, and the presenter frequently wanders back and forth across the stage. I can use the motion tracker to track his wanderings (since the camera is set to a fairly wide angle). What I want to do with the motion tracking information is have the presenter's clip pan back and forth as he walks forth and back - with the net result that he stays in the center of the screen. (I'd use a zoomed portion of the image so that there would be enough to fill the frame.
Is there a way to do this? It would make forum recording so much easier.
I have a clip where I have tracked the motion of two eyes (not the eyemovement, but the location). The tracking is awesome by the way. The placeholders are following the movement very good. My goal is to have some kind of effect on the eyes (scary, sci-fi etc), like lens flare coming out of them. But I can't figure out how to add this effect to the motion I have tracked. I have tried adding the effect to the place holders, but it looks very ugly and they are still just a couple of squares.
how I can add an effect to a motion track like this..?
I am about to upgrade to x4 I been using VS for a long time - The new version works very smoothly on my laptop and most of the work on this versions seems to be just making it work better which is great.
Question:
Overlays is there any thing more that can be done with moving the overlays around? direction/style is very limited or maybe I am don't know some tricks or new features.
I would like to have the overlay re-size as it moves (or not) there seem to be no way to customize the path and spin
anyway to do this?
I've recently changed from PC to Laptop and reinstalled Videostudio x4.
On my last PC (which was considerably older and less capable) while using the stop-motion editor, I could capture in upto 1280 x 720 resolution using my Microsoft Lifecam 5000 HD - however now with the same camera after the reinstall the highest resolution on the drop-down menu is 640 x 480 which obviously isnt widescreen or anywhere near in terms of resolution.
One thing which could be related is that on this laptop I have two lots of "program files" - "Progam Files" and "Program Files (x86)". The program itself is installed on the x86 section but when VS is searching for sample videos or overlays etc they've all needed relinking as its attempting to find them in the normal "Program Files" folder - could the resolution problem be a similar relinking issue?
Is it possible to change the time of the fade in/out motion effect of an overlay video? I use VS Pro X3.
View 2 Replies View RelatedMy son has taken an interest in creating stop-motion animation with his Lego building sets using Corel Video Studio 4. I have experimented with using our video camera (JVC Everio) as well as several of our digital cameras (Nikon "Coolpix", a semi-generic Canon, etc.) to capture the images "live" and then import them using the stop-motion creator in the CVS4 program with no luck. The best I can do is use a webcam. The problem is that the lens aperture and resolution on the webcam is so small that it creates a sub-optimal image.
I am thinking I will need to invest in a DSLR (which I have been thinking about getting anyway) in order to effectively use this feature. suggest a DSLR that will merge with CVS4 and allow me to capture the image live from the camera and produce better animations? I have looked at a Nikon d3100 and the Canon EOS Rebel - leaning toward the Nikon (for no particular reason) but want to make absolutely sure it will interface with CVS4 like this.
I'm about halfway through my 30 day trial of VS Pro X4, and starting to feel a little more comfortable with the software, but a few things are still puzzling me. Granted I've only scratched the surface of the SW capabilities so far.
I took the plunge and got a new Panasonic HDC-TM90K HD video recorder to replace my old 8mm analog Sony. I've only had the opportunity to use it several times, so far so good.
The Panasonic camera comes with HD Writer AE 3.0 software. Pretty rudimentary compared to VS Pro X4; does the basics, trimming, titles, transitions etc. Not bad, it works, but definitely not as sophisticated as VS Pro X4. However I need software that can capture the 8mm tapes I'm converting, which the Panasonic SW cannot, really don't want to learn/use two software packages so hence trying to focus on VS Pro X4. See thread viewtopic.php?f=1&t=41255 for my question re: mpeg compression.
Using the Panny HD Writer SW I was able to capture and burn AVCHD DVD's from the Panny camera SW without issue, not too difficult considering this is my firt time doing all this stuff. AVCHD DVD's play just fine on my Sony Blu-Ray.
I tried capturing the same video content from the Panny camera with VS Pro X4 and could not. VS Pro X4 is stating there is no camera attached. I believe the Panny SW is hijacking the USB connection first and hence is controlling the connection to the camera. I tried looking for some services that the Panny SW has running and closed the auto-run of the Panny SW, but still no luck. I haven't tried uninstalling the Panny SW, that's next.
I was however able to import the files from the Panny camcorder using the import function in VS Pro X4 by selecting the files I wanted. Imported files are the exact same size as the files imported in the Panny HD Writer AE 3.0 SW.
Was able to make a simple little video by adding a title, couple of transitions between clips etc, couple of chapter markers. All went fairly well. Then did "Share > Create Disc", used the default (only) disc template that came in the VS Pro X4 SW trial, selected AVCHD and burn disc, no issues, until I went to play the disc in my Sony Blu-Ray. Once the action in the video picked up and there was significant motion in the video the video started to break up, don't know the technical name for it, digital artifacts maybe? It doesn't look like the deinterlacing examples I've seen, which appear to be unaligned thin lines, this is more blotchy, like blocks of data not being filled in.
So then I tried it again and selected 2 pass conversion, this time it worked, which is good, but does that need to be done anytime your burning HD content to a AVCHD DVD?
I'm trying to add a title at the end of the movie which I'd like to appear as movie credits and I want the final 3 lines to stay on the screen (not exit).
My text starts moving and when it reaches a certain point, pauses for a few seconds and then it continues to move and then disappears. I want to change the pause point of the text but I can't figure out how to do it and also I want the paused text to stay on the screen until the end of the movie.