VideoStudio :: Pro X4 - Slow Load / Rendering?
May 13, 2012
I created a 30min video, with a lot of photos mixed with live video, transitions, music, etc. Now, when I try to reopen the file for futher editing, it appears the software needs to re-render all the thumbnails in my video track stream. As I mentioned, I have a lot of photos in there, so it's taking forever.
With the previous software I used (Pinnacle Studio), I could flush the cache and have the program rebuild (and store) all the thumbnail info for faster loads in subsequent sessions.
View 7 Replies
ADVERTISEMENT
Jun 19, 2013
I have Corel VideoStudio Ultimate X6 and am having problems rendering clips in slow motion.
I have recorded at 50p in full HD. In Video Studio I have slowed the clips down to 25%, and when I do a preview in the editor, it looks fantastic. However when I render to a MP4 file it looks terrible. You can see every frame.
How do I render and get at least the same quality as I get in the preview window?
Here is the video I am talking about. [URL]...... through to about 30 seconds to see the jumping.
View 3 Replies
View Related
Oct 23, 2013
For some inexplicable reason, the 'Smartsounds' tracks I load into the time line do not RENDER. That is, the 'share' button creates the suitable video file without the music! Their is a message, "Load from Stream Error" which comes up after the rendering process.
View 6 Replies
View Related
Feb 25, 2013
How do I increase cs6 3D rendering speed
View 1 Replies
View Related
Jun 6, 2012
I have a notebook with specification as mentioned below :
Lenovo Ideapad Y470P 2nd generation Intel Core i7-2670QM Processor( 2.2GHz 1333MHz 6MB) Windows 7 Ultimate x64 AMD Radeon HD 7690 2GB 8.0GB PC3-10600 DDR3 SDRAM 1333 MHz 750GB 5400
I'm using Adobe Photoshop CS6 (64 Bit) for doing my job.Right now, i have a task to create a banner with dimension 800 x 900 Centimeters with Resolution 300 DPI and Color Mode RGB 16 Bit.The file size when blank is about 56.1 GB.The problem is, when i add some text with Horizontal Type Tool and click on the Move Tool, the Rendering Type screen show up and take a very very long time to finished.
I have made some configurations to my Photoshop that i found on Adobe Forum, but the problem still persisted.
Some configurations that i've made is :
- Turn off the Automatically Save Recovery Information
- Set Maximize PSD and PSB File Compatibility to Ask
- Set the Memory Usage to 95%
- Set the Cache Levels to 8 and Cache Tile Size to 1024K
- Set the Graphics Advanced Settings to Drawing Mode Advanced, and Check the option Use Graphics Processor To Accelerate Computation, and Uncheck the option Anti-Alias and 30 Bit Display
- Set the Scratch Disk to another partition ( C:System D:PageFile E:Data F:Scratch Disk)
And after all of that configuration, my Photoshop still slow when Rendering Type.
View 9 Replies
View Related
May 27, 2012
Rendering video in new Photoshop Cs6 is very very very slow!!
Example:
(test on iMac intel 3,2 Ghz i3, 8gb Ram, 512 Mb video Radeon, 1Tb Hd)
1:40 (min:sec) video (no effect, no levels, only cut 5 sec.), rendering video (H.264 high quality) in 15 minutes!!!!!!!!!
Simply unusable.
View 4 Replies
View Related
Jul 30, 2013
i have the imac 27 680mx 32gb ram,when i render on cs6 takes very long time, the first one takes 8-10mins,when i do the second time its very fast 30seconds
View 7 Replies
View Related
Jan 13, 2014
It used to be that when rendering a timeline, there would be no lag between rendering the first and second videos. Now, between each video there is about a 30 second transition before the next video begins rendering. Anything that would have caused this, or is there anyway to prevent it? If I am rendering a timeline with 60 clips that need rendering, this can add a significant amount of time.
View 1 Replies
View Related
Jul 13, 2012
I am run Photoshop CS6 Extended 64-bit (from design premium) on Windows 7, 64-bit with 8GB RAM.
When I first start PS, it looks like it freeze on the text "Measuring Memory". If I wait for about 30 seconds, it will eventually load and everything works fine. No issues with Save for Web or anything.
I have read the other threads on this and tried all of these solutions:
Checked my ram in memtest (15 passes, no error)Trash preferences and open again UN-install and re-install (tried twice)Updated PS to latest with Adobe Update Reboot machine .
This happen when I first run Windows, so lack of RAM is not the issue. I have no printers, other hard drive, or remote network drive attached to machine. Scratched disk is set to the boot disk (C:)
Illustrator CS6 and InDesign CS6 load normally.
View 22 Replies
View Related
Aug 27, 2008
I am using PS CS2 on my XP based PC and it has worked fine for a number of years. Recently whenever I start PS is loads fine but then the very first image takes ages to load (>1 minute). All subsequent images load quickly as you'd expect.
It doesn't matter where that first image is saved and the size of the image makes no difference.
View 4 Replies
View Related
Sep 6, 2008
I just installed photoshop cs3 on my laptop! I try to open a file i take approximately 2-3 min to load! Any idea's what could be the problem! Oh and they aren't big files! And in case anyone needs to know.....Its a brand new laptop just bought it last week! Its running on a dual core intel at 2.0GHz 4g of ram 512 graphics card!
View 2 Replies
View Related
Jun 3, 2013
I've got a lot of scenes that have become exceedingly slow to save and load. Like often taking 10 to 20 minutes to save. With looming deadlines this is becoming really desperate! I've tried merging into a new scene, running scripts to clean out notetracks etc. Even after deleting every object and material, and resetting all render settings, the file is still inexplicably slow. See attached example.
View 5 Replies
View Related
Oct 11, 2012
I've seen this topic on the threads, but mostly for previous versions. I have LR4, and my previews load so slowly. How can I speed them up? Bridge handles the previews so fast and it is so much nicer going through with that program, but I'd like to move my workflow to LR4 solely. But hard to with the preview handling being so much slower.
View 8 Replies
View Related
Sep 18, 2013
I just checked whether the update to 5.2 would improve speed of rendering images in the Develop module for Nikon D800 NEF files but alas, LR is still taking its time to render images and going back and forth between two or more D800 NEF files to check focus at 100% magnification remains an excercise in meditation....
I had initially hoped that the move from LR 4.x to LR 5 would improve things but this wasn't the case - so when will Adobe finally catch up with the development in cameras with ever bigger files? The Nikon D800 came out one full year ago...
View 3 Replies
View Related
Mar 11, 2009
I'm working with a friend who's got perhaps unusual Photoshop needs. He's working on a 10000x20000 pixel 16 bit image with maybe 6 image layers and 12 total layers. Loading the file takes about 20 minutes.
The system is a 2.6 GHz quad-core i7 with 12 GB RAM and a 32GB SSD primary scratch, 200 GB of secondary scratch, with a 1 GB Radeon HD 4870, running CS4 64bit on Vista 64.
What seems odd to me is that memory usage climbs steeply for the first perhaps 4 GB, looking like the load might complete in a minute or two, then the CPU kicks in for the long, long remainder of the load. The file on disk is roughly 5 GB.
We've got issues aside from this, but I'll detail them in another thread.
View 39 Replies
View Related
Aug 26, 2011
My work helpdesk has recently installed AutoCad 2012 and my co worker and I noticed that at the start up its loads very slowly and often when we double click on a DWG to open (without Autocad being already open) it crashes.
View 2 Replies
View Related
Jul 29, 2013
Slow rendering image previews in import dialogue?
My LR 5 is as slow as a snail generating those previews.
Importing my RAWs form the EOS 6D (saved on a 95MB/s 32 BG SanDisk Extreme Pro) it renders only the 12 or 24 displayed previews and leaves out the rest (the next only when I'm scrolling down). For 12 images LR5 needs 8-10 seconds. LR4.4 does the same process for all 150 RAWs in 1-2 seconds.
It doesn't matter if I want to import to my workstation (Dell Precision T1650, 8core Intel Xeon E3-1240 V2, 16GB RAM, 64bit) via USB 3.0 (Reader & Port) or to my laptop (Dell Latitude E6400). So it must be LR, not my hardware.
Are there known issues with the Canon-RAW format? I just updated EOS firmware to 1.1.3, but the renderspeed stays the same. For 1 image 3-4 seconds single...
View 1 Replies
View Related
Feb 9, 2013
I have a question concerning Adobe Dynamic Links.
This is my problem : I work on After Effects. I have a composition that is rendered quite fast. (almost in real time...)
But when I open the linked comp in Premiere Pro, it lags as hell. Maybe 2x, 3x slower.
So I'd like to know why Adobe Premiere Pro is slow, while After Effects is fast ?
View 5 Replies
View Related
Jul 30, 2013
that is having really slow performance using AE CS6 or AECC and possibly AE CS5.5 I think i might of found out what the problem is.My System specs are below:
Dell T7600 Dual XEON E5-2687W 3.1/3.8GHz w turbo / Dell M6700 i7 -3940XM 3.9GHz
64GB Ram / 32GB Ram
Nvidia Quadro K5000 / Nvidia Quadro K5000M
Windows 7 x64
Here are the issues I was having
- Really slow performance when scrubbing along the timeline.
- Adaptive Resoltion wasn't working at all super slow previewing
- Multiprocessor rendering not working, or taking forever to start up, and sometimes it would work but still not the way it should it was hit or miss
- Disk Caching not working
- many others that I can't think of at the moment
SOLUTION for slow scrubbing of the timeline for Quad, Six and Eight core systems
Here is what I figured out after hours and hours of testing and configuring. I even went back to AE CS5.5 to see if all these problems existed in that version. Although some did but not all
From what I can tell it looks like certain plugins are not compatible to Quad, Six and Eight Core machines. The main plugin that has the problem is Keylight 1.2 that comes bundled now with CS6 and CC.
If you turn off the plugin on your layers scrubbing the timeline speeds up and works like it should. If you want to use keylight then do the following:
- under screenmatte, set the screen softness to 0
- shrink and grow to 0.
If you use any number other than these settings it causes scrubbing and rendering of the timeline to go extremely slow.
SOLUTION for all the issues above for Quad, Six and Eight core systems
After hours and hours of testing I have come to the conclusion that AE CS6 and CC don't work well with Quad, six and eight core systems in general and especially with the keylight plugin.
FIX: Go into your Bios of your computer and set your multiple core to either 1, 2 cores, theis will give you 2 thread or 4 threads. This will fix all the issues as stated below. I haven't tested 4 cores yet but soon will.
But I know that 6 and 8 cores definitely does not work it causes all the major issues above.
After setting my system to 1 or 2 cores, Ae is extremelly fast and responsive. Timeline scrubbing is super fast now even with keylight 1.2 and all it's settings. Adaptive resolution now works, Multiprocessing starts up
immediately and disk caching is working.
Conclusion
I am not able to set my system to use 8 or all cores in my bios, This causes so many performance issues in AE CS6 and CC and some in even CS 5.5. I need to use either 1 or 2 cores. As you might no this really sucks when I am limiting myself to only 4 threads when I could be using 32 threads. Pleas Adobe look into this issues with these systems that have 4, 6 or 8 core systems. This could possibley just be for Dual core systems too since that is what I have here.
View 5 Replies
View Related
Feb 4, 2014
Suddenly Maya's import/export/open file dialogue box has become extremely slow, taking forever to browse thru folders, freezing in the process.
This is independently of file/scene size. Specs are Ok. CPU i7-4930k, 16gb RAm, Geforce GTX 780, running windows 8.1 with a Kingston SSD and a second 3tb Caviar Green HD.
View 4 Replies
View Related
Jun 18, 2005
I'm using windows XP with Photoshop CS.
Whenever the network cable is connected to the computer, Photoshop start-up load time is significantly longer than when I pull the network cable out.
View 4 Replies
View Related
Jul 15, 2013
Preview panel "preview" freezes indefinitely.App very slow to load while creating new previews. (previews take forever to create and update)Wrong previews showing for wrong images when swapping between folders, etc. (ie: all photos, last import, custom collections) This one is a little different...
Ratings lost when switching between folders, etc. (ie: all photos, last import, custom collections) This was a clean install that ran beautifully at first. Started noticing this more and more after using the spot tool. (my last step in processing a job)
I use separate catalogs per job. Some as small as a few dozen images. (family stuff) Others, as large as 500-600. (engagement and wedding clients)
View 2 Replies
View Related
Dec 24, 2010
I have a project that suddenly won't load. I have 25 versions of it, I save it under a new file name each time in case I need to go back to an older version.
Trouble is most of the versions won't load! Only the very early versions will load. Some of the later version start to load then disappear.
Hardware hasn't changed on the PC, maybe the video drivers have been updated, thats about it.
View 2 Replies
View Related
Jun 12, 2012
VS X5 Pro wont render clips totalling more than 6 plus minutes......Gives me one of these 2 errors >frame 724 unreadable, frame 1024
unreadable. I click on OK and poof! everything is gone!!
View 12 Replies
View Related
Oct 5, 2010
Sometimes (only every now and then), when I try to render a project to AVI VS instantly crashes. Lets say I have three projects, project1, project2 and project3. Project1 & 3 will render to AVI just fine, every time. Project2 will crash every time I try to render to AVI. I can render any of the projects to MPG, MP4, WMV, whatever else I want. If I recreate project2 from scratch as Project4, it will then render to AVI just fine. If I remove >>EVERYTHING<< from all timelines in project2, then add a new clip that did not exist before, it crashes when rendering to AVI. Project2 contains both AVI and MPG clips created/captured with VS X3 just a couple of days prior. VS X3 has all the latest updates.
When I say render to AVI I mean I select Share->Create Video File->Custom->AVI and leave it at the default of 24bits, 720x480, 29.97fps, Lower Field First, Uncompressed, PCM, 48.000kHz, 16bit, Stereo. Video on the timeline includes MPEG-2, Lower Field First, 24bits, 720x480, 16:9, 29.97fps, VBR, LPCM, 48000Hz, 16bit stereo and Microsoft AVI OpenDML, 29.97fps, 30532.12kbps, uncompressed, 24bit, 720x480, PCM, 48000Hz, 16bit, Stereo.Although this is a rare occurance, it is a real pain to have to recreate the video from scratch every time this happens.
The computer is a new Windows 7 Pro 64bit, Core2Duo E7500, 4GB Kingston HyperX RAM, 750GB WD Black SATA, Radeon X1550, Asus P5QL/EPU, Pioneer SATA DVD+/-RW, Antec 380 power Supply. Windows has all updates, AV is Microsoft Security Essentials, software installed includes VS X3, Adobe PS Elements 8, Super Video Converter, Office 2010, Nero 8 Essentials, Microsoft Expression Web 3, QTIndexSwapper2, Filezilla, Audacity, Adobe Reader 10 and supporting software that those applications install.
View 1 Replies
View Related
Jul 29, 2011
It seems VS always output a video file with 29.970 fps even if the footage was taken at 24P, 30P. Can video studio output a video that is the same as its capture fps rate?
View 2 Replies
View Related
Sep 29, 2011
I am using VS X4 on windows 7. I have an .AVI file which I captured from a VHS tape so it includes sound. The video is 105 minutes long and the file size is 21.9 GB which is huge. I brought it into a project, edited as necessary including making adjustments to the sound in the AVI file, added titles, transitions, and an additional sound track. When I render this project to make a video file it takes a very long time and the resulting .wmv file is huge (11.2GB). I hate to think what it would be to make a DVD. Is there some thing I should do differently to avoid the rendering time and the size of the files?
View 6 Replies
View Related
Dec 14, 2010
I test at the moment Videostudio X3 and made a small test project. If i produce a AVCHD project i don't have a preview by rendering this project and i can't find a option to enable this ?
View 4 Replies
View Related
May 10, 2012
We are now using Canon X10 HD cameras and recording in h.264 1440 X 1080. The finished product has to be MPEG2 for Public Access TV broadcast.
I can't seem to be able to adjust settings to accomplish this. Both Custom and Movie Template have the user defined button greyed out.
View 11 Replies
View Related
Feb 10, 2012
VideoStudio PRO X3 crashes very often when rendering a VSP-file (with m2ts videofragments) that contains also transions and text.
It happens when I want to create a HD-file (PAL, Blu-ray /MPEG or H.264/ 1920*1080). Disabling SmartRender did not work. Also setting off hyperthreading did not solve the problem.
The problems do not occur when the VSP-file only contains m2ts fragments.
The recommendations given by Corel Helpdesk (download & install VS updates, C++ and DirectX updates) were not very useful because I had already implemented the most recent updates
My current version of VS PRO X3 is 1.6.2.69.
- Does these kind of problems also occur with VS PRO X4 Ultimate?
View 4 Replies
View Related
Nov 30, 2010
i have made a project which crashes in different places every time i try to render. its about 40 minutes long. i have tried removing and reloading pro x2 and cleaning the registery.
View 9 Replies
View Related
