I shoot DNG in camera at 10.3mp. When opened in CC and I go to image size it is suddenly 58.9mp but only 11.9in by 9.6in in size. Why? I am looking to get a 16x20 print out of it with oul loss of image quality.
View 1 Replies
when I use the shortcut key to increase my brush size, from 1 to 10, it increase at a 1 rate per click.
but hen I hit 10, next one is 20px. how can I change this behavior to go to 11?
I'm currently using my created brush and when I try to use the basic brush, it immediately jumps back to my created brush with it's stroke size.
Â
Align to pixel grid is turned off so it cant ber that.
Â
I used to resolve this problem (when I was actually trying to keep using my created brush when it was reverting back to basic brush) but I would resolve it by double clicking on the designated brush in the brushes palette.
Â
Also seeing as were on the subject of brushes, nop matter how I adjust the firmness/ pressure both in the driver setting of my wacom and for the brush in illustrator, I see no difference?
This is a weird one, but I am new to lightroom. I have these pins on my image, which are all grey, and when I click on them, they jump to another image. I can't seem to figure out what is happening here.. I think they were created when I add a graduated filter,,,
Â
I cannot delete them because when I click on them they jump to a diffeferent image... It's super annoying trying to add graduated filters when you keep jumping to a different image...
When I go to crop or move an image close to the edge of the canvas it jumps to the edge. I am having trouble especially with cropping the space between the image and the edge of the canvas the way I want it. turning off this jumping to edge problem I'm having?
Also, I've used CS4 a fair bit and haven't come across this same problem but in PE when I'm editing things like adjusting text on a layer and I'm changing options with hotkeys to resize the text box for eg, Elements seems to jump to the background layer quite alot and then I have to click back on the layer I want to edit between changing tools. Is it something to do with the Esc key?
i currently have a logo that is 460X440 pixels and 12.17cmsX11.69cms and the resolution is 96 pixels per inch.
i am wanting to change it into a 2cm X 2cm avatar that is less than 6K in size,
how do i do this? everything i try makes the output file about 24k in size.
the reason i am doing this is the forum i regularly post on has a max avatar size of 6k.
1. How do I connect, collapse and disconnect windows (tool bar, property manager, etc.)? They get stuck together and I can't unstick them. Â
2. What's the difference between canvas size and image size? Â
3. Which tools are only for web design (i.e. tools I can ignore if I'm not doing that)? Â
4. What's the subselection tool do? Â
For Photoshop: Â
1.Why is the original layer always locked?
2. Whats the name of the property inspector in PS? And is it called inspector or manager in FW?
I'm using Photoshop 7. I create a new document 8.5 x 11 inches at 150 pixels per inch.
I draw a circle 1" from the top of the image. The circle is 3" in radius.
When I print the circle is nearly .25" smaller in radius and slightly less than 1" from the top.
Why is the output not in the same placement and proportions as the image on the screen?
Have CS4 on Windows XP. Wacom tablet and pen. Nvidia GEForce 7600GS video card.
Have updated Tablet drivers and Video card driver as of this am. (Fri Jan 16 09). Adobe updates seem to be having a bit of trouble coming through though. Virus program is AVG.
Healing brush only, when we alt click to set the selection point and then move to the area we want changed and drag the curser, the selection point glides along smoothly while the target hops along giving a series of altered spots with non-altered spots in between.
Clone brush and so on are fine.
Any ideas, past experiences? Or have I ventured into new territory?
I am trying to create some images in PS2 that have to be 3.5 to 4.0 mb. When viewing the Image Size screen, I might see an image size of 9.6 mb. However, when I save the image and run my mouse over the image in Bridge, it shows a size between 2 to 3 mb. I can't figure out why this discrepancy, or what math I need to do in order to figure out how to create the required image size other than by trial and error.
View 1 Replies View RelatedIn the new Image>Image Size dialog box, the preview is always at 100% which seems a bit disorienting.Is there a way to set that to default to "fit".
View 6 Replies View RelatedI have CS5.1 on a Macbook Pro.I have an incredibly frustrating problem.   I've seen similar questions, but not an answer that has resolved this for me. I have an image I have sized to fit an 8.5 x 11 inch paper. Canvas and image size all indicate my image is sized at 7.33 x 11 inches. It is at 300 dpi. Print size view indicates full space is utilized on either side….BUT…
Â
When I go to print, I click "scale to fit media" (which is an 8.5 x 11 paper sitting in printer) image prints smaller with a bar on one side. .
When I uncheck STFM,
I get:
scale - 92.67%,
[code]...
I have a created a new PSD that is 8 1/2 x 11.The canvas size is the same 8 1/2 x 11.I want to put a border around the picture (say 1/2 of an inch all around), and put the finished picture in a Picture frame. After it is in the frame, you would be able to see the entire picture plus the border. Q. Should I change (reduce image size) of the PSD to (for this example), 8 x 10 1/2.     Then increase the canvas size to 8 1/2 x 11. After I increased the canvas size, do a Paint Bucket fill with white (to create the White border)? then print the changed size PSD on 8 1/2 x 11 paper so that it will fit into a 8 1/2 x 11 picture frame I realize I could have just created the new PSD to be 8 x 10 1/2 in the first place.
View 5 Replies View Related When I save a file to jpeg the image size in photoshop remains the same as it was as a tiff file BUT according to the information that comes up in windows properties the file is much smaller (300k vs 2.9mg).  Can you advise me which is the correct file size?  If the correct size is the one showing in windows (300K) does mean that the file compressed in JPG and lost a lot of information?
 and if this is the case how can I prevent that from happening and still save the file as a JPG?  [ I would like the image to remain the size photoshop shows it to be] . Thank you very much.
my polygonal lasso keeps jumping to close before I'm done and before I double click. Is there a way to make it less sensitive? What's wrong?
It seems that the more I use it the quicker it jumps to close.
Our company is migrating from CS1 to CS3 (finally!). We found a curious issue with the brush tool in Photoshop: in CS1, when you click near the edge of your open file window, it just draws to that point - and stops. That's it. In CS3, when you click near the edge of your open file window, it automatically jumps out / scrolls the window in the direction in which your line is traveling. Is there a way to disable this function?
View 2 Replies View Related The exposure slider in camera raw always jumps back or forward to the nearly next full f-stop if I choose another slider!
View 1 Replies View RelatedI use Adobe Photoshop Elements Version 8.0, and I use Windows 7.
Â
The problem: Whenever I use any tools involving the usage of the mouse on the canvas, everytime I click to use the tool, sometimes the cursor seems to 'jump' out of position and I end up unintentionally putting paint on the wrong part of the canvas. And before I release the click, I try to move the mouse around in random directions to no avail; the mouse doesn't respond until I release the mouse. In another similar case, sometimes for a split second the cursor seems to move on its own and it leaves behind a random trail of color. Example: Let's say I wrote down my name 'Andrew' on the canvas. I end up something similar to 'Anc e.", along with a black dot/calligraphic stroke or two unintentionally placed when writing down my name. I had to undo and click several times until I properly got the tool working. I'm working on a certain project in PS
Â
I'm guessing a part of my bare hand is just barely in physical contact with the touchpad?
can a watermark stay the same size even when an image size is altered? say if its text and it gets too big when i enlarge the image how do i shrink the watermark ? when it is already merged and flattened as one picture without a separate layer.
such as a php or java script to keep the watermark distinct in a way even in a flattened pic or to select the watermark to erase it and re-apply it in the right font size back onto the resized pic?
Is there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.
View 6 Replies View RelatedI am having trouble with Image/Resize/Image Size in PSE7. In the past I had a document size of 4x6. When I wanted to reduce the # of pixels, I just entered new #s and the document size remained the same. A couple days ago I changed both the document size and canvas size. I cannot get my old settings back. I even uninstalled and reinstalled the program, I also have PSE11 on a trial basis and it also only sees the changed settings. I've tried changing Scale Styles, Constrain Proportions & Resample Image, in addition to changing the Canvas Size but cannot get it to work like it did before I changed the settings.
View 6 Replies View RelatedThe quick selection tool now doesn't work on the image I'm editing at all. When I try to select only the leaf, the marquee jumps straight to the edge of the photo, effectively selecting the whole of the image and background. Here is a screenshot:
Â
I have tried resetting the tool.
I have a layer I'm resizing and is currently in Transform.When I beging to drag the layer to position while it is in resize the center reference point will jump to my mouse causing me to move the reference point outside of the tranform layer. Normally I would have to click on the reference point and drag it intentionally or hold CTRL and click in the transformed layer to set a reference point, but it since CS6 is had still remainded in CC.
Â
This happens when I transform the layer (Ctrl+T) and then grab the layer to move. I have to put the reference point back to center via mouse or by the reference point on the menu bar up top. Then I can go back and drag my later where I need it to finish my transform.
I've created a template and would like to import a PDF over the top of it. Â The problem is, when I import the PDF, the text jumps in the PDF as you can see below. Â As you can see the original file is on the right hand side.
View 5 Replies View RelatedI go through a lot of sketch stages to get to a final picture, and I sometimes print on legal paper. My Brother printer does fine at that with Apple Pages, MSWord, Acrobat, and Illustrator, but with Photoshop there's a problem. I set up a legal-size image in PS, go through all the settings I can find for printing to a non-letter-format sheet, hit print, and what I get is a letter-size patch of image on a legal-size sheet. Clearly, either I am missing something or PS is missing something.
View 3 Replies View RelatedWhen trying to Edit/Playback imported .MP4 files it keeps jumping, it's fine when I use .MOD files
View 2 Replies View RelatedWith osnap on endpoint only, no other dynamic inputs on, no polar, 3dobject snap dynamic input, grid or snap on.
The cursor looks like it jumps up form the endpoint but actually it moves in the same Z as the osnap. Also when i zoom in i can't move my cursor to the upper or lower part of the screen depending on where I zoom too. If I turn magnet off it seems better but still not correct. In the drawing I uploaded I can't move the cursor up to the entities. If I open a new drawing everything works, on a different drawing everything works. If I insert this into a new file I get the problems back.
My cursor jumps every time when I single click on to hatch or use the hatch command it also does the same with text.
View 1 Replies View RelatedAll toggles are turned off and the cursor jumps all over the screen when zoomed in. Also, there are two rectangular boxes in the northeast quadrant of the crosshairs when moving near a point or node. How to eliminate this? All function keys are off.
View 2 Replies View RelatedWe are using autocad 6 nad install it in new dell computer,windows xp, the mouse jumps up and down and hard to control, sometimes it moves by itself a leave a trail, fist time it happens.
View 1 Replies View RelatedWhen I move objects across layers, the the screen "jumps" or "jitters". Could this be related to the refresh rate? Maybe it is my monitor?
View 1 Replies View Related
