when I use the shortcut key to increase my brush size, from 1 to 10, it increase at a 1 rate per click.
but hen I hit 10, next one is 20px. how can I change this behavior to go to 11?
I'm currently using my created brush and when I try to use the basic brush, it immediately jumps back to my created brush with it's stroke size.
Align to pixel grid is turned off so it cant ber that.
I used to resolve this problem (when I was actually trying to keep using my created brush when it was reverting back to basic brush) but I would resolve it by double clicking on the designated brush in the brushes palette.
Also seeing as were on the subject of brushes, nop matter how I adjust the firmness/ pressure both in the driver setting of my wacom and for the brush in illustrator, I see no difference?
n CS3 I could change the size of thumbnails to be large, but in CS5 it only allows me to do that from the upper bar (left side top). I can barely see the brush imags on the palette (right side). How do I change them also? Here are the two screenshots showing how dramatically different the sizes are. In CS3 I could adjust them with the down arrow on the palette, but that option is not available on CS5. (See 3rd and 4th screenshot of cs3 versus cs5.) CS3 has "large thumbnail option).
View 1 Replies View RelatedI want to use artistic filters to get painting-like effects on some photos, but when I'm working with large image files at 300 lpi all of the brush strokes are way too small. How can I increase the size of the brushes in the artistic filters? I've tried downsizing the photos, applying the effects, then upressing; but I get pixelization.
View 2 Replies View RelatedI can use the left and right bracket keys to increase and decrease the size of my brush... But this just does not seem to work!
I'm using Mac OS X 10.4, and I'm hitting Option-5 and Option-6 (what is the key combination of [ and ]), but nothing happens...
PSPRo X.I have lost the ability to increase the size of the clone brush either by the presets or by the mouse and keyboard.It will not show by more than about one eighth of an inch square .
View 2 Replies View RelatedI’m a PS user new to Illustrator (CS6). In PS, using the bracket keys [] to increase/decrease brush point size will simultaneously update the data displayed in the tool panel at the top.
While I can use the bracket keys in Illustrator to change the appearance of the brush stroke, it is not being updated in the tool panel input or in the stroke window…so I can essentially have (2) 3 pt strokes created with the same brush that don’t visually match but whose display properties DO match. Because I will be doing lots of editing I certainly don’t want to work this way.
Have CS4 on Windows XP. Wacom tablet and pen. Nvidia GEForce 7600GS video card.
Have updated Tablet drivers and Video card driver as of this am. (Fri Jan 16 09). Adobe updates seem to be having a bit of trouble coming through though. Virus program is AVG.
Healing brush only, when we alt click to set the selection point and then move to the area we want changed and drag the curser, the selection point glides along smoothly while the target hops along giving a series of altered spots with non-altered spots in between.
Clone brush and so on are fine.
Any ideas, past experiences? Or have I ventured into new territory?
The feature where you can quickly change a brush size/ diameter by pressing Alt + hold right click (for Windows) (In Mac, control + alt + left click) is neat but is there any way to change that shortcut to a different combination? I can't find it in the shortcuts list.
View 1 Replies View RelatedOur company is migrating from CS1 to CS3 (finally!). We found a curious issue with the brush tool in Photoshop: in CS1, when you click near the edge of your open file window, it just draws to that point - and stops. That's it. In CS3, when you click near the edge of your open file window, it automatically jumps out / scrolls the window in the direction in which your line is traveling. Is there a way to disable this function?
View 2 Replies View RelatedI have my preferences set up for my cursor to show as brush size, but suddenly my brush shows up as a tiny dot no matter what size I change it to (I've gone all the way up to 5000 pixels with no effect when using the brush, healing brush, and clone tools). My image is 1402x996 pixels at 200ppi. I've tried zooming in with no effect. I'm probably missing something obvious, but I can't think what.
View 2 Replies View RelatedIn CS 3 suddenly i cant change the size of my brushes anymore. Well i can from very tiny -when you only see a cross- to about 45 pixels (with a default brush) when i use the slider it can show 2500 pixels but its still the 45 pixels from before. I dont understand, everything worked fine, i was working already abour 45 minutes without any problems, and suddely this happens....can anyone tell me what could be wrong or what to do about this?
View 8 Replies View RelatedI shoot DNG in camera at 10.3mp. When opened in CC and I go to image size it is suddenly 58.9mp but only 11.9in by 9.6in in size. Why? I am looking to get a 16x20 print out of it with oul loss of image quality.
View 1 Replies View Relatedis there a option to change the brush size for the adjusment brush like in photoshop cs5 (alt and mousepoint movement) ?
View 2 Replies View Relatedsetup PS so that the scroll wheel on your mouse changes the brush size? I use Aperture and this functionality is built in and I find it tremendously useful. When I export an image to PS I find it really annoying to have to reach up to the brackets to make that adjustment.
View 2 Replies View RelatedIs there a method to hold down a key on the keyboard and drag to change the size of the brush , Instead of using the dialog box all the time ?
I have a German keyboard ... will this work too?
how do u change the drop shadow size of a brush in photoshop 7?
i can change the size of the brush but not the drop shadow size...
use i mac i7, lion 10.7.4.
It seems that, in CS6 Photoshop, I could RIGHT CLICK, and a small panel would drop down at cursor location, allowing me to change size, hardness, and roundness of the brush.
I have recently updated to 13.0.1. The technique described above no longer works, but I can't be sure that this happened after the update. I may, as often, have screwed up a preference checkbox.
Intuos5 pressure-sensitive tablet
Win7 64-bit
PS 5.5
In Photoshop 5, if I turn on the pressure sensitivity while using the Clone tool (and perhaps other tools as well...) I have to bear down very hard to make the pixels being cloned appear in the entire circle [brush] specified. The behavior I want is, instead, to be able to CHOOSE 1. pressure changes size of the flow within the brush [size]setting or 2. the full brush size places cloned pixels on the image at a rate of flow directly controlled by the pressure I exert on the pen nib.
There are some kinds of images that need to go back and forth easily between the two choices. Behavior now is just #1.
After upgrading from CS6 beta to CS6 release this function stopped working (on OS X Lion). The only think that happens when I use both keys (Ctrl+Alt) and move the mouse is moving the whole application/cs6 windows.
View 10 Replies View RelatedHow to change the default behavior when I draw an arc?
I want to write "arc" in the command line, and start drawing it by its center first, then its start point, and I finally the end one. I don't want the default 3 points method.
I do this faster drawing circles and trimming them, than selecting the suboptions of the arc (center, start, etc.). It should not be XD .
Is there a way to change the default Resize behavior for pipes. I'd like to have it set to crown. I can change it for each pipe but that's gets tiring after a little bit.
HP 4600 4 GB Ram
Intel Core 2 Duo 2.66
ATI FireGL V5600 (8.391.2.1100)
Windows XP PRO (SP 3)
2008; (All SP) LDT, MAP 3D
2009; Civil 3d 2009 Update 1 Version 2, Map 3D, Raster
How to change the zoom in and out behaviour of the middle mouse wheel in Windows GIMP to work without having to press the ^ (control) button on the keyboard? I'm using to zooming in and out using just the mouse wheel alone and hoping that a setting in GIMP could be changed so that it also works without pressing the ^ (control) button at the same time.
I've googled this along with a few other things over last couple of days but no luck. Can this be done?
On digital tutors i learned that the blob brush size can be changed interactively. But since i use a mac in combination with a cintiq and a swiss german keyboard i cannot use the bracket keys.
They also don't work when i assign the us keyboard settings. How can the brush size of the blob brush be changed interactively?
I was trying painting with gimp and there is a shortcut in gimp to change the size of the brush/opacity my moving the stylus like you can on photoshop or sketchbook pro.
ALT+ctrl on a mac
This would be an incredible time-saver for us artists and not very complex. If not I will suggest this feature to the gimo developers.
Using the local adjustment brush i can change the size of the brush using the [ and ] brackets However.. when i make a small error and want to erase brushed-area by using the ALT key then the brush size seems to be fixed to one size ?
View 1 Replies View RelatedI need to do some shading work in Gimp, and for this it would be very nice to have a quick way to change my brush size. Luckily there's a note in the gimp docs on how to program the mouse wheel to do this:
[URL] .....
My laptop only has a touchpad with a little scroll area on the side, but I can't think of a good reason why this should be any different from a scroll wheel on a real mouse. Unfortunately, though, following the documentation doesn't work.
In fact, as far as I can tell, the input controllers dialog does nothing at all on my system--I've looked at the settings for the all of the 'active controllers,' and none of the current settings there match with the actual behavior of Gimp as far as I can tell. It also worries me that the controller names are so generic--they're listed as 'Main Keyboard' and 'Main Mouse Wheel' rather than mentioning a synaptics touchpad, and my tablet doesn't even seem to be listed.
I am using Gimp 2.6.11 on Ubuntu.
you probably heard this many times but i got a picture and would like to resize an object in the image. for example a car and i would like to make the rims bigger, how would i do that.
View 1 Replies View RelatedHow do I increase the font size for menus, icons, etc that show on the screen. the default size is so small it is barely readable.
View 5 Replies View RelatedI have a file that is 622kb and it has to be at least 2mb for publication. I've saved the file as the maximum quality but it's still too small.
The original was 122kb.
How can I increase the thumbnail size in my pictures ?
View 4 Replies View Related