I have my preferences set up for my cursor to show as brush size, but suddenly my brush shows up as a tiny dot no matter what size I change it to (I've gone all the way up to 5000 pixels with no effect when using the brush, healing brush, and clone tools). My image is 1402x996 pixels at 200ppi. I've tried zooming in with no effect. I'm probably missing something obvious, but I can't think what.
View 2 RepliesThe feature where you can quickly change a brush size/ diameter by pressing Alt + hold right click (for Windows) (In Mac, control + alt + left click) is neat but is there any way to change that shortcut to a different combination? I can't find it in the shortcuts list.
View 1 Replies View RelatedIn CS 3 suddenly i cant change the size of my brushes anymore. Well i can from very tiny -when you only see a cross- to about 45 pixels (with a default brush) when i use the slider it can show 2500 pixels but its still the 45 pixels from before. I dont understand, everything worked fine, i was working already abour 45 minutes without any problems, and suddely this happens....can anyone tell me what could be wrong or what to do about this?
View 8 Replies View Relatedis there a option to change the brush size for the adjusment brush like in photoshop cs5 (alt and mousepoint movement) ?
View 2 Replies View Relatedsetup PS so that the scroll wheel on your mouse changes the brush size? I use Aperture and this functionality is built in and I find it tremendously useful. When I export an image to PS I find it really annoying to have to reach up to the brackets to make that adjustment.
View 2 Replies View RelatedIs there a method to hold down a key on the keyboard and drag to change the size of the brush , Instead of using the dialog box all the time ?
I have a German keyboard ... will this work too?
how do u change the drop shadow size of a brush in photoshop 7?
i can change the size of the brush but not the drop shadow size...
use i mac i7, lion 10.7.4.
It seems that, in CS6 Photoshop, I could RIGHT CLICK, and a small panel would drop down at cursor location, allowing me to change size, hardness, and roundness of the brush.
I have recently updated to 13.0.1. The technique described above no longer works, but I can't be sure that this happened after the update. I may, as often, have screwed up a preference checkbox.
when I use the shortcut key to increase my brush size, from 1 to 10, it increase at a 1 rate per click.
but hen I hit 10, next one is 20px. how can I change this behavior to go to 11?
Intuos5 pressure-sensitive tablet
Win7 64-bit
PS 5.5
In Photoshop 5, if I turn on the pressure sensitivity while using the Clone tool (and perhaps other tools as well...) I have to bear down very hard to make the pixels being cloned appear in the entire circle [brush] specified. The behavior I want is, instead, to be able to CHOOSE 1. pressure changes size of the flow within the brush [size]setting or 2. the full brush size places cloned pixels on the image at a rate of flow directly controlled by the pressure I exert on the pen nib.
There are some kinds of images that need to go back and forth easily between the two choices. Behavior now is just #1.
After upgrading from CS6 beta to CS6 release this function stopped working (on OS X Lion). The only think that happens when I use both keys (Ctrl+Alt) and move the mouse is moving the whole application/cs6 windows.
View 10 Replies View RelatedOn digital tutors i learned that the blob brush size can be changed interactively. But since i use a mac in combination with a cintiq and a swiss german keyboard i cannot use the bracket keys.
They also don't work when i assign the us keyboard settings. How can the brush size of the blob brush be changed interactively?
I was trying painting with gimp and there is a shortcut in gimp to change the size of the brush/opacity my moving the stylus like you can on photoshop or sketchbook pro.
ALT+ctrl on a mac
This would be an incredible time-saver for us artists and not very complex. If not I will suggest this feature to the gimo developers.
Using the local adjustment brush i can change the size of the brush using the [ and ] brackets However.. when i make a small error and want to erase brushed-area by using the ALT key then the brush size seems to be fixed to one size ?
View 1 Replies View RelatedI need to do some shading work in Gimp, and for this it would be very nice to have a quick way to change my brush size. Luckily there's a note in the gimp docs on how to program the mouse wheel to do this:
[URL] .....
My laptop only has a touchpad with a little scroll area on the side, but I can't think of a good reason why this should be any different from a scroll wheel on a real mouse. Unfortunately, though, following the documentation doesn't work.
In fact, as far as I can tell, the input controllers dialog does nothing at all on my system--I've looked at the settings for the all of the 'active controllers,' and none of the current settings there match with the actual behavior of Gimp as far as I can tell. It also worries me that the controller names are so generic--they're listed as 'Main Keyboard' and 'Main Mouse Wheel' rather than mentioning a synaptics touchpad, and my tablet doesn't even seem to be listed.
I am using Gimp 2.6.11 on Ubuntu.
The brush size on my paint brush and clone stamp are not working properly.
View 1 Replies View RelatedThe brush preview size does not match brush stroke. I've insert a pic of the problem. I tried allmost everythning, but nothing works.
I use a wacom tablet.
I have contacted Adobe about issues with Photoshop brushes recently. My issue is that the brush size is smaller than the circle that represents the brush. In other words, when I hoover over the area that I want to paint or erase with the circle and then click, the painted or erased area is smaller that the circle. It's really frustrating when fine tuning an image, you never know how close you are to what you want to correct. This is only visible when you zoom in quit a bit. I worked with an Adobe tech for over an hour and he could not simulate the problem. Then he finally asked if I was using a retina display, (he was not).
View 4 Replies View RelatedThere are a few things I just don't get about brush settings. Sometimes it seems my brushes go all wonky.
When I change the settings for 1 brush... say I add some jitter to a smooth brush - then suddenly the other brushes get the same jitter applied to them.
How can I set the brushes so that each brush has a different setting that doesn't change when I change any other brush settings?
p.s. I also don't get why Adobe has you lock a brush by UNlocking it? Seems to me it should be the other way around?
the size of the brush at the Brush Mask Tool can not be changed when I pressing the Shiftbutton
X6.4 - Win7
I'm using a tablet with gimp and I want to be able to set the brush size for the paint brush and also for the eraser, separately. What happens now is that I'll set the paintbrush size to 10px, paint for a little while, turn the pen over to erase and the eraser will now be at 10px. So I'll adjust the eraser size to something like 50px, erase, turn over, and now the paintbrush is at 50px. Grrrrrrr... I tried creating new brushes for both the paintbrush and the eraser, but there's no brush size option. This is my first time using gimp so I'm probably missing something.
View 4 Replies View RelatedHow do I get my brush size to be the sam size as the cursor. [URL]...
View 6 Replies View Relatedfor some reason when I change brush size by the pallette or the [ keys I only see the cross hairs with a dot in the middle. I've tried ctrl, alt shift to reinsate all settings but still do not see a visual representation of the brush size.
View 3 Replies View RelatedI'm having a problem with the Blob Brush tool where I can't change the basic brush to something else. Whenever I pick a brush I want and I try draw with the Blob Brush tool, the brush I picked reverts back to the basic brush. Here are screenshots:
I pick a brush that I like first
But when I start drawing with the Blob Brush tool, it reverts back to the basic brush automatically
Am I doing something wrong or is the Blob Brush tool only capable of using the basic brush?
When I make the brush size for any tool bigger part of it will disappear. Only the small brush sizes are shown as complete circles.
This happens with all tools that use a brush size. If I make the brush bigger or zoom into the document only a small part of the brush size will be visible. This part of the brush is placed inside a square. The edge of this square cuts the cursor off at the bottom and right.
If I move something with the move tool and it's a bit fast, the same square size will pop up, dividing the object into squares.
The first one makes it impossible to work in Photoshop since I can't use big brushes (with either pencil, brush, erasor): I can not see the cursor when the brush is big or if the document is zoomed in. If the document size is 100% and the brush is big the same thing happens.
Working on a brand new workstation. XP 2002 SP3.
Intel Quad corre Q9550 @2.83 Ghz.
I.98 Ghz 2.98 GB RAM.
Graphics card NVIDIA Quadro FX 1700.
Extra hard drive 1 Tb.
When I use a brush for anything and I want to increase or decrease the size by using the bracket keys the brush will not increase as large as it did in CS3 and part of the circle disappears leaving a half circle at best. Is this due to some plug-ins that I have from NIK or FixerLabs?
View 9 Replies View RelatedSo, I haven't been using Illustrator (CS5) for a two weeks and I always create calligraphy brushes on the go, so I don't save them. However, out of the blue, I can't change the brush diameter to change with pressure nor the other options because they're greyed out.
Im using a Genius G-Pen M712X and mac osx 10.6.8..
How do I make cursor size the same as paint brush size in CS6? It isn't and it makes selecting more difficult. Preferences>cursor does not seem to fix.
View 11 Replies View RelatedI'm using Photoshop CS5 with a Wacom cintiq, and the brush size is stuck at 1 px, it won't change size no matter what -even if the brush size is set to 1000 px, the brush will paint a scraggly thin line...
I've changed brushes/ opacity/ flow/ pen pressure/ restarted photoshop/ restarted computer/ shut down, etc. It doesn't changeIt works just fine in the mixer brush tool, but not the regular brush tool..
In my system the liquify brush size goes from 1 to 151 to 301 to 454 and on up.
It it not possible to get smaller brushes like 30 60 100?
CS6 extended Win7 Graphic Accelerator on (this makes no difference in brush steps)
I was practicing using the Elements 10 Spot Healing Brush, and it was working fine. I closed out of Photoshop so I could go view some more tutorials. When I opened it again, I was unable to see the physical size of my brush..in Spot Healing or in Clone. It registered as a number in the upper bar, but I could not see the brush size as before. I had been using the brackets to raise and lower the size before I lost the ability to view the physical size.
View 2 Replies View Related