Is there a way to change the default Resize behavior for pipes. I'd like to have it set to crown. I can change it for each pipe but that's gets tiring after a little bit.
HP 4600 4 GB Ram
Intel Core 2 Duo 2.66
ATI FireGL V5600 (8.391.2.1100)
Windows XP PRO (SP 3)
2008; (All SP) LDT, MAP 3D
2009; Civil 3d 2009 Update 1 Version 2, Map 3D, Raster
How to change the default behavior when I draw an arc?
I want to write "arc" in the command line, and start drawing it by its center first, then its start point, and I finally the end one. I don't want the default 3 points method.
I do this faster drawing circles and trimming them, than selecting the suboptions of the arc (center, start, etc.). It should not be XD .
I have a situation where the default behavior of my rectangle tool (or any of the other shape tools) is now different. I'm on Mac OS X 10.6.5 running Illustrator CS5. It acts as though the option-shift keys are pressed, so whenever I draw an object, it draws from the center point and the dimensions are constrained, so i can only draw a square or circle, not a rectangle or ellipse. Additionally, whenever I use the selection tool, it clones the object I drag, and also constrains the positioning, so i can only drag in a 0, 45 or 90 degree angle (or multiples thereof). It's as if my option-shift keys are permanently pressed (if I actually press option-shift, the behavior persists). I tried using a different (brand new) keyboard, tried throwing away preferences, and the problem remains. I also tried booting up Illustrator CS4, and the weird problem showed up there! This behavior just started happening spontaneously. I couldn't think of anything weird that happened (a crash, a new plug-in, etc.). I can't find a preference that sets this behavior either.
View 6 Replies View RelatedI am using Civil 3D 2013. I work in an office where we have a few different flavors of Autocad (LT, MEP, regular vanilla AutoCAD etc...) and versions (2010 LT, 2011, 2012, 2013).
For the most part there isn't much inter-office drawing coordinate that has to happen, but there is the occasional project where multiple disciplines (Structural, Mechanical and Civil Site) have to share drawings.
The specific problem I am having is when I share my 2013 Civil 3D drawing with a user using 2011 MEP. He gets the typical rectangle for the proxy objects (in my case, my pipe networks for sanitary and storm drain). We've tried downloading and installing various object enablers, but there doesn't seem to be one for a 2013 to 2011 scenario. So I setup my parts to be on layers that he can just turn off. HOWEVER... the actual pipe network (not the structures, parts, labels etc... the network itself) ends up on layer 0. For this specific project, I do the old (ssget "x" '((8 . "0")) search to select all objects on layer 0, add those objects to a selection set (pselect), then in my modify objects dialog I filter for pipe networks, then change the layer to something other then 0.
While this is a workaround that works for me, what I really want to know is if there is a way that I can change the default layer that the network (again, not pipes, structures or text, the actual network) so I don't have to use the workaround. Any thoughts?
P.S. It's killing me that I had to create a new Autodesk login and now all my AutoCAD "street cred" is lost
"The source of expertise is not in the memorization of the minute details of a subject but in the thorough understanding of the fundamental concepts on which it is based."
Is there any way to set the default corner seam behavior in the sheet metal template? Right now a simple corner seam always puts a gap approximately the metal thickness, I need to make that smaller as the default behavior.
View 4 Replies View RelatedI have created a pressure network using 8-inch diameter pipes. How would I change the 8-inch pipes to 6-inch pipes without having to recreate the network.
View 7 Replies View Relatedwhen I use the shortcut key to increase my brush size, from 1 to 10, it increase at a 1 rate per click.
but hen I hit 10, next one is 20px. how can I change this behavior to go to 11?
How to change the zoom in and out behaviour of the middle mouse wheel in Windows GIMP to work without having to press the ^ (control) button on the keyboard? I'm using to zooming in and out using just the mouse wheel alone and hoping that a setting in GIMP could be changed so that it also works without pressing the ^ (control) button at the same time.
I've googled this along with a few other things over last couple of days but no luck. Can this be done?
I am using C3D 2008, SP2
I am trying to change some default layer settings. I go to: Toolspace -> Settings tab -> Right click the drawing name -> Edit drawing settings -> Object layers tab. There I can set the default layers that objects are created on. I want to set "General Note Label" and "General Segment Label" to be created on what ever layer is current.
I can change it under structure properties, but I can't find where to change it before I make the pipe network , 2013 Civil 3D.
View 2 Replies View Relatedwhere to change the default beginning station from 0+00 to 1+00 in my civil 3d profile template (dwt), so that the beginning station is always 1+00, unless the user changes it.
View 3 Replies View Relatedhow do you change their layer? i have been through the settings tab under "alignment", "station offset". i also right clicked on one and went through the properties.
View 4 Replies View RelatedI often create points manually. You get that dialogue box where you choose the layer and the default local coordinates, etc etc.
The local coordinates setting always defaults to Northing/Easting. (ditto the grid coordinates).
I set it to Easting/Northing as is standard around these parts and do my points, but if I close the box, when I reopen it to add more points later, it is back to Northing/Easting.
I cannot find a variable to control this behaviour.
I never need points to have north first and would like it to default to Easting/Northing at all times. Yes I'm using the Metric template.
Is there a way to change this default?
When creating my plan set, I need to data reference pipe networks into other drawings than that in which they were designed to show crossings in profile views or to separate out profiles into managable drawings. When I do this, if I have swapped a type-13 inlet for a 10' type R inlet or something during design, the data referenced pipe network will replace the 10' type R with a default inlet. Also if I have swapped a proposed 30" pipe for an existing 30" that have different styles, the data referenced pipe network will revert back to the proposed 30" pipe. how to make a data referenced pipe network reflect what is currently in the design drawing?
View 9 Replies View RelatedI've been able to publish and then import valves, flange adaptors etc. with no problem, but if I create a flanged (metric) pipe using the Content Catalog Editor and then draw the pipe in C3D it shows blank ends, no flanges. I've split the pipe in the drawing to see if that forces flanges to appear, but nothing.
Do I need to create the flanges seperately and then add them to the end of pipes?
I'm using Civil 3D 2013
I am modelling a sewer pipe network in SSA. At some stages we use varies pipe materials with different wall thicknesses. So I want to know how can I assign inner diameter of pipes in SSA so I just deduct wall thickness from pipe diameter and then assign it to the pipe. Or is there any possibility to make a pipe list with specific properties like part builder in civil3d?
View 5 Replies View RelatedIs there any way to split a pipe (in a non-pressure network) in two?
View 2 Replies View Relatedwhy when i mesure the pipe diam prependicular in profile its less than the accurat dimension of the pipe whoever i changed the profile vertical exaggeration to 1, it still wrong? when mesured virtical it is ok
View 8 Replies View RelatedI have a 8'x7' Box culvert with manholes. The manhole needs to sit on top of the 8'x7' boxes. I also want to see the pipe drawn from center of manhole to center of manhole. not stop at manhole wall.
[URL]....
What the best way to draw multiple parallel pipes that cross a corridor. In my example I have a track with 4 pipes crossing the track corridor on slightly different alignments (from perpendicular to skewed). I have drawn the pipes on as individual pipes under the same network.
However I cannot get them all to display on the profile. I have tried "Draw Parts in Profile" but it seems to bring up only 1 pipe. managing multiple pipes.
I have two pipe networks and two profile views, one for storm and another for sanitary. I would like to show the crossing pipes on each of the profile views. When I select the profile view, add a pipe and change the style to crossing the style is change to crossing on the other profile view (ex. on sanitary profile view I set storm pipe 3 to crossing style, on the storm profile pipe 3 changes to crossing style and does not display). Isn't there a way to display the styles for pipes different in each profile view?
C3D 2011 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
I have a profile with a couple of pipe networks in it. One of the pipes shown extends beyond the edge of the profile at some crazy angle. look at the picture for a better explanation.
View 5 Replies View RelatedWhen I try to make a pipe network the structures are visible but the pipes are not present. I thawed all layers with no success. This is a recent development because It was working last week.
View 2 Replies View RelatedHow to do profiles in Civil3D and I have created a profile from the surface utilizing a miscellaneous alignment. I have also taken one 12"RCP and made it part of a network along with the catch basin and manhole at its start and end. When I click "draw parts in profile" it places both structures and the pipe, but in reality only a portion of the pipe crosses the alignment. I'd like to only display portions of pipes that cross the alignment at a fixed width form that alignment, say 2' to each side of it.
View 9 Replies View RelatedI have a number of tables which have all properties about the pipe network with the cooridnates and upstream/ downstream info. Can it import to C3D and automatically generate the pipe to 3D?
View 9 Replies View RelatedI'm a bit of a Civil 3D newbie. I've got a project that involves addition of storm drain to existing storm pipes. I'd like to be able to use Civil 3D to include existing and proposed pipes in the networks, but be able to show existing pipes differently than proposed pipes on plans and profiles, i.e. screened. I can't seem to figure out a way to do this--I can effect changes to all networks, but not invididual pipes.
View 9 Replies View RelatedIs there a way (and I'm just missing it) to have a pipe from a pipe network only be shown 'cut-off', with the typical 'cut-off' shown on the profile view? see the screen shot of sketch of what I'm referring to.
View 2 Replies View Relatedwhy I can't label certain pipes/structures? I can select the pipe or structure, rt click, add label and I get nothing. The layer is on cause I can see other labels. I also get the same result when I go to annotation, pipe label. This only happenes to certain pipes or structure, others in the same network label fine.
View 9 Replies View RelatedI received some dwg files to show existing utilities from a local municipality. I thought the files would come as shp files, but they are dwg files. The drawings/dwg files show the layout of pipes, but the pipes are polylines. The polylines have data attached to them. The properties show material, size, length, slope, etc. I am trying to label the pipes/polylines and I can't figure out how to get the information from the polylines.
View 4 Replies View RelatedBack in 2010, I created several optional properties in pipes for labeling purposes.
The file I modified is: AeccPartParamCfg.xml
I have migrated this file to 2011, 2012, 2013 without any issue. In 2014, I am getting a run time error for one of the optional properties and therefore that option is no longer working.
Created optional properties and run into problems in 2014? Works fine in all my previous releases of Civil 3D using the same parameter file.
Attached is the Parameter file and error at start up.
In order to have a data band at the bottom of my profile label the station and invert of my sewer pipe I just created a profile along the pipe and then have a data band in my profile that labels that profile. I have that profile style set to not plot so this way I can leave it on all the time. This is all fine and well. I have labels every 100' that label the station and invert elevation but at times I want to label miscellaneous locations along my pipe such as a bend or something. How do I add an addition data band label to achieve this? Everything I have found only lets me have these labels at a specified increment set in the band style.
View 2 Replies View Related