Illustrator :: Rectangle Tool Default Behavior Is Odd / Dragging Objects Clones Them By Default

Jan 28, 2011

I have a situation where the default behavior of my rectangle tool (or any of the other shape tools) is now different. I'm on Mac OS X 10.6.5 running Illustrator CS5. It acts as though the option-shift keys are pressed, so whenever I draw an object, it draws from the center point and the dimensions are constrained, so i can only draw a square or circle, not a rectangle or ellipse. Additionally, whenever I use the selection tool, it clones the object I drag, and also constrains the positioning, so i can only drag in a 0, 45 or 90 degree angle (or multiples thereof). It's as if my option-shift keys are permanently pressed (if I actually press option-shift, the behavior persists). I tried using a different (brand new) keyboard, tried throwing away preferences, and the problem remains. I also tried booting up Illustrator CS4, and the weird problem showed up there! This behavior just started happening spontaneously. I couldn't think of anything weird that happened (a crash, a new plug-in, etc.). I can't find a preference that sets this behavior either.

View 6 Replies


ADVERTISEMENT

AutoCAD 2013 :: How To Change Default Behavior When Draw An Arc

Dec 5, 2013

How to change the default behavior when I draw an arc?

I want to write "arc" in the command line, and start drawing it by its center first, then its start point, and I finally the end one. I don't want the default 3 points method.

I do this faster drawing circles and trimming them, than selecting the suboptions of the arc (center, start, etc.). It should not be  XD .

View 3 Replies View Related

AutoCAD Civil 3D :: Change Default Resize Behavior For Pipes?

Aug 25, 2008

Is there a way to change the default Resize behavior for pipes. I'd like to have it set to crown. I can change it for each pipe but that's gets tiring after a little bit.

HP 4600 4 GB Ram
Intel Core 2 Duo 2.66
ATI FireGL V5600 (8.391.2.1100)
Windows XP PRO (SP 3)
2008; (All SP) LDT, MAP 3D
2009; Civil 3d 2009 Update 1 Version 2, Map 3D, Raster

View 3 Replies View Related

AutoCAD Inventor :: Set Default Corner Seam Behavior In Sheet Metal Template?

Jan 10, 2008

Is there any way to set the default corner seam behavior in the sheet metal template? Right now a simple corner seam always puts a gap approximately the metal thickness, I need to make that smaller as the default behavior.

View 4 Replies View Related

Photoshop :: Dragging All Layers In A Group By Default

Nov 20, 2008

I recently upgraded to CS3, and I'm getting quite frustrated at it.

I am used to having to select a layer from the layer panel to move it around. Now, whenever I click on something in the image, it auto chooses that layer and let's me move that around. I'd rather not have it set this way. I like to be able to click anywhere while my chosen layer is selected and be able to move it.

It's especially frustrating when I have things in groups. Instead of just moving the layer clicked, it moves the entire group.

Is there a fix to this in the preferences somewhere? I've scoured the menus and can't find anything relevant to this 'feature'.

View 1 Replies View Related

Illustrator :: Changing The Default Tool?

May 19, 2013

Is it possible to change the order of the tools upon a keyboard shortcut press?  For example, I want the path eraser, but have to go through the pencil and smooth tools first; is there any way to bring the eraser to the top of that stack or assign it to it's own shortcut?

View 5 Replies View Related

Illustrator :: Change The Default Type Tool?

Mar 13, 2013

I got CS6 Design Standard and the default type tool is "Right-To-Left Type Tool". I don't see the way how to change it. I managed to change the default type face and language for new documents but the type tool is switching back to RTL no matter what. How to change this?

View 6 Replies View Related

Illustrator :: Change Default For Magic Wand Tool?

Jun 20, 2013

Can you change the default for the magic wand tool? I use it all the time and having to manually put it to a tolerance of 0 all the time is just a little annoying.
 
CS6, windows.

View 12 Replies View Related

Illustrator :: Rectangle Moving While Dragging One Edge To Resize?

Feb 24, 2014

I draw a rectangle. I want that rectangle to be longer, so I drag one side. Why does the other side move a little? I can't think of an instance where this would be useful behavior.
 
Here's the rectangle:
  
Here is what it does when I drag:
  
Notice the outline preview of how big the rectangle will be. On the left side, It has moved considerably from it's original position. Why? Why on earth would I ever want that and is there a way to make it stop?

View 10 Replies View Related

Illustrator :: CS6 Layers Panel Won't Allow Moving Objects By Dragging Selected-art Indicator Dot

May 22, 2012

Having trouble moving objects between layers by simply dragging the right-hand dot to a new layer? CS6 won't let me drag the dot on any kind of selected art from any kind of file I've tried..
 
Click the name of the desired layer in the Layers panel. Then choose Object > Arrange > Send To Current Layer. Drag the selected-art indicator , located at the right of the layer in the Layers panel, to the layer you want.  But method #2 doesn't work at all for me. In fact, the cursor doesn't even change when I mouse over the selected-art indicator dot.

View 23 Replies View Related

Illustrator :: Star Tool Is Dragging From The Inner Radius

Mar 17, 2014

I'am using illustrator CC but while using the star tool, instead of being drawn while being dragged by the tip or the outer radius, my star is getting dragged from the inner radius. The problem does not occur when dragging while holding the alt key.

View 1 Replies View Related

Photoshop :: How To Make A Tool The Default

Jun 20, 2013

I use the ruler tool a lot more frequently than the eyedropper, but PS keeps defaulting back to the eyedropper. Is there any way to make the ruler the default tool for that group?

View 9 Replies View Related

Photoshop :: Pen Tool Default Angle

Oct 6, 2012

When using the pen tool a person can create a line by eyeballing its angle. But if you hold down Shift while creating a line the program has default angle settings. I was hoping there are way to create setting profiles, or just plain changing the default setting of the Shift/snap-to option for the pen tool. I am working on HUD layouts and designs and am finding it difficult to concistantly get the angle I need. Eyeballing resaults in varying angles (barely, but I can notice it), but the Shift/snap-to angles are too sharp.

View 1 Replies View Related

AutoCad :: How To Set Default Layer To Tool

Jun 7, 2013

I was wondering if there was a way to assign layers to individual tools. In other words, if I want to use the linear dimension tool, upon clicking on the tool the layer would automatically switch over to my dimension layer without me having to manually change layers.

I am using AutoCAD LT 2013.

View 2 Replies View Related

AutoCad :: How To Set Default Layer To A Tool

Jun 7, 2013

I was wondering if there was a way to assign layers to individual tools. In other words, if I want to use the linear dimension tool, upon clicking on the tool the layer would automatically switch over to my dimension layer without me having to manually change layers.

I am using AutoCAD LT 2013.

View 2 Replies View Related

CorelDRAW X6 :: Default Setting Of Tool Flyouts?

Aug 3, 2012

Whenever I open coreldraw the CURVE FLYOUT has the freehand drawing tool as the one that shows. I never use the freehand drawing tool and would much prefer the flyout to default to the polyline tool. But I cannot find a way of making it do that. Of course, if I select the polyline tool it will show as default from then on, but it always reverts to the freehand tool on restarting coreldraw.

View 7 Replies View Related

Photoshop :: Line Tool Default Problem

Jun 16, 2006

im having trouble with my line tool, it draws an arrow instead of the regular straight line i want it to draw. i dont know how to set it back to a regular line,

View 2 Replies View Related

GIMP :: Move Tool As Default At Start-up?

Jul 21, 2011

I am using Gimp version 2.6..At the start-up it has the "Paintbrush Tool." I want it to have the "Move Tool" immediately after or when the program starts.

Having the Paintbrush Tool at start-up is inconvenient because if I click on the image it paints where I click. Then I have then got to undo the paint.How can I set GIMP so that the Move Tool is the default mode when it starts?

View 6 Replies View Related

GIMP :: How To Change Default Tool Settings

May 22, 2013

How to change the default tool settings in Gimp?

When I open Gimp, I want all selection tools to have antialiasing turned off, all thresholds set to 0, default brush set to 1 pixel, and erase tool set to hard erase.

How can I achieve this? (I use gimp for pixel drawings.)

View 3 Replies View Related

Paint.NET :: Set Individual Default Colors For Each Tool?

Feb 14, 2012

I've read the manual on selecting colors for tools - like text, rectangle - but find nothing about saving a "preferred" color selection for various tools. Searched forum as well. Admittedly, this may be a bit below the general use of Pdn.

1) I gather there is no one - click "text box" tool / function. True? Where you select a region, it fills in a background color of choice, then you click in box & start typing - & text color is also saved from earlier choice.

2) Among other things, I'd like to at least be able to save / set a color that Pdn will use every time I draw a rectangle (unless I change it), & also set a different color for text tool.
If I understand, the way you change colors as you select different tools is, must click the tool icon, then click the color you want - EACH time (if different than current primary color selection).

Is there no way to save a "default" color (say Red) that Pdn will use each time you select the text tool, and (say, yellow) each time you click rectangle tool? Many prgms save color selections made for each tool

I read the help section on working w/ palettes, but that doesn't assign / save specific colors to specific tools. Unless I missed something (quite likely), you have to continually select colors each time you use a new tool (if you want it to use a different color than currently showing in Primary Color box). This seems like a lot of unnecessary clicking, if you typically want (for example) to always use a specific color for rectangles & another for text. Seems like that should be default behavior, instead of clicking color selection every time you change tools?

View 11 Replies View Related

Lightroom :: Can Get Crop And Straighten Tool To Default To 16 : 9

Jun 29, 2012

I have a large number of RAW photos from a Canon 7D which are destined for use in a Premiere Pro CS6 project.

I want to crop each of them to the preset 16x9 1920 x 1080.

What I would like to happen is that when I open the photo in the develop module and press the R button to open the Crop and Straighten tool, that the Aspect 16X9 crop overlay is selected be default, rather then the "original".

This would save me a lot of mouse clicks...

Or perhaps it's possible to assign a keyboard shortcut to that particular aspect so I can press R and then something else?

View 3 Replies View Related

Illustrator :: CS6 Direct Selection Tool Dragging Object Rather Than Creating A Marquee?

Jul 21, 2013

When I click and drag with the direct selection tool, I'm getting a drag on the object rather than a marque for selecting points. As soon as I click, the tool switches to the black arrow tool. Did I mess up a setting somewhere? I'm not using any modifier keys.

View 2 Replies View Related

Photoshop :: Open Moov Tool Selected By Default

Feb 25, 2012

I am using adobe Photoshop cs2 . When I open the Photoshop, the default tool selected is "Rectangular Marquee tool". every time I have to first select the "moov tool". How to open the Photoshop with this "moov tool" selected by default?

View 19 Replies View Related

Photoshop :: Tool Bar Not Working - How To Get Back To Default Setting

Aug 13, 2012

There is something wrong with my tool bar and I don't know how to get it back to the default setting. Here is the link:[URL]...

View 4 Replies View Related

Paint Shop Pro :: X4 - Selection Tool Reset To Default?

Oct 3, 2011

How the tools all have the option to reset to default. I was doing something earlier that required the selection tool and I saw that it had been changed, so I clicked to reset and nothing happened. All my other tools reset just fine.

View 14 Replies View Related

AutoCAD 2010 :: Keep Tool Palette From Going Back To Default After Set It Up

Feb 14, 2013

How do I keep the tool palette from going back to the default after I set it up?

View 2 Replies View Related

AutoCAD 2013 :: Tool Palette Default Settings

Jun 6, 2013

With all of my “plan view” blocks I add to the tool palettes I set “prompt for rotation” to yes. I am manually doing this every single time I add a block and of course I hear about it if I forget to do so.

Where would I set this as a program default?

View 1 Replies View Related

GIMP :: Scale Tool - Keep Aspect Make Default?

Sep 12, 2013

is it possible to make the 'keep aspect' option in the scale tool checked by default? it is unchecked every time Gimp starts up and I tend to make the mistake and oddly scale a floating layer because the aspect isn't staying the same. is there any way to make the 'keep aspect' option on by default so when I start up Gimp I don't have to constantly scale it wrong or having to always need to lock the proportions?

View 6 Replies View Related

Lightroom :: Reset Tool - Get Back To 100% Default Settings?

Mar 17, 2014

i recently updated to 5.3 and everything was great, just like normal..  then after an import of raw files, i selected one to develop and went to look  for my "exposure" slider on the right side of the screen.  it has disappeared???  i also am missing my simple saturation slider too.  now i have an extremely indepth saturation sliders for every color.  i have tried to reset tool settings, i have searched around, i even reinstalled lightroom hoping i would get it back to what i am used to...
 
is there a preference file that i can delete to get me back to 100% default settings?

View 2 Replies View Related

CorelDRAW X6 :: Control Text Color Default In Dimension Tool?

Jan 1, 2013

it seems like in the past whenever i made either artistic text or paragraph text color default, that was reflected in the control Text using the Dimension tool.

but no matter what changes i make in X6, it remains a chalky blue.

View 4 Replies View Related

Photoshop Elements :: Quick Selection Tool Default Settings?

Jan 4, 2013

What the default settings are for "hardness" and "spacing" on the brush dropdown for the quick selection tool in PE 10?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved