AutoCAD Civil 3D :: How To Change The Sump Default Value For Structures

Feb 10, 2012

I can change it under structure properties, but I can't find where to change it before I make the pipe network , 2013 Civil 3D.

View 2 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Import STM Change Sump Level Of Structures

Oct 4, 2013

I am struggling to import .stm file into a blank civil3d file. it does import whith correct sizes and elevation. the issue is rim level of structures are the same as SSA file but it will make 2 meter sump depth to stuctures, thus structures invert levels are not correct. i just made a sump depth rule for structure and applied to some of them. it will correct it but as i have more than 1000 manholes in network it will be a major job to apply the rule. i know "apply rule" command will work a lot but i would like to know why it is importing whit wrong properties?

View 3 Replies View Related

AutoCAD Civil 3D :: Change Structure Sump Depth For Multiple Structures

May 21, 2012

I have about 100 manhole structures with a 0.5' sump. I want them all to 0.0'. Is there a way to change the sump on more than one structure at a time?

The only way I have found to change the sump depth is one at a time through the structure properties.

Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600

View 2 Replies View Related

AutoCAD Civil 3D :: Default Pipe Network Layer (Not The Structures Or Pipes The Network)

Dec 7, 2012

I am using Civil 3D 2013. I work in an office where we have a few different flavors of Autocad (LT, MEP, regular vanilla AutoCAD etc...) and versions (2010 LT, 2011, 2012, 2013).

For the most part there isn't much inter-office drawing coordinate that has to happen, but there is the occasional project where multiple disciplines (Structural, Mechanical and Civil Site) have to share drawings.

The specific problem I am having is when I share my 2013 Civil 3D drawing with a user using 2011 MEP. He gets the typical rectangle for the proxy objects (in my case, my pipe networks for sanitary and storm drain). We've tried downloading and installing various object enablers, but there doesn't seem to be one for a 2013 to 2011 scenario. So I setup my parts to be on layers that he can just turn off. HOWEVER... the actual pipe network (not the structures, parts, labels etc... the network itself) ends up on layer 0. For this specific project, I do the old (ssget "x" '((8 . "0")) search to select all objects on layer 0, add those objects to a selection set (pselect), then in my modify objects dialog I filter for pipe networks, then change the layer to something other then 0.

While this is a workaround that works for me, what I really want to know is if there is a way that I can change the default layer that the network (again, not pipes, structures or text, the actual network) so I don't have to use the workaround. Any thoughts?

P.S. It's killing me that I had to create a new Autodesk login and now all my AutoCAD "street cred" is lost

"The source of expertise is not in the memorization of the minute details of a subject but in the thorough understanding of the fundamental concepts on which it is based."

View 9 Replies View Related

AutoCAD Civil 3D :: Sump / Baffle Box In Drainage Ditch

Sep 6, 2013

I'm trying to add a sump/baffle box to a drainage ditch. I'm taking this project over from someone else.  They had created a surface. However, I'm confused about how the surface they made was created, but I have used it to give me a reference to were the sump is located on the profile view. (circled in blue).  Currently that surface has wall that are 1.5' high with a bottom at -1.5'.  I have drawn in the sump on the profile view (highlighted in yellow).

I have tried to start over by using breaklines.  I have already created a standard breakline on the N and W side at 0.  However, on the east side, how to create a breakline and keep the drainage basin grading to the exisitng drainage basin grade.

I have attached screen shots of the plan and profile view. 

View 2 Replies View Related

AutoCAD Civil 3D :: How Sump Inlet Depth / Spread Calculated

Jun 7, 2013

Any hydraflow calculates depth of flow and spread at sump inlets?  Does it assume that the entire flow is coming from one direction (similar to an on-grade inlet)? Or does it make an assumption about how much flow is coming into both ends of the inlet?

View 4 Replies View Related

AutoCAD Civil 3D :: Pipe Network - Profile Sump Display Incorrect

Dec 2, 2010

I am having problems with the display of my structures in a profile view.  Previously, when I change the inverts of the pipes connected to my structure it would automatically adjust the bottom (sump) of the box invert to match my lowest pipe.  However, for some reason it has stopped doing it and is now displaying the sump invert incorrectly.  I have my style set to "Display as a Boundary".  I have edited the structure sump to be by both elevation and depth, but it does not update the sump elevation.  I have tried to grip edit the sump but it seems to be locked at a certain elevation.  I have a profile with 10+ structures and they are all at multiple depths.  I realize there are minimum depths allowed by the structure, but I have exceeded the minimum depths in all cases.  Attached is an image that depicts my problem.  No matter what I do to change the depth it stays locked at a certain elevation.

Civil 3D 2011, SP1

View 9 Replies View Related

AutoCAD Civil 3D :: How To Change Default Layer Settings

Jan 8, 2008

I am using C3D 2008, SP2

I am trying to change some default layer settings. I go to: Toolspace -> Settings tab -> Right click the drawing name -> Edit drawing settings -> Object layers tab. There I can set the default layers that objects are created on. I want to set "General Note Label" and "General Segment Label" to be created on what ever layer is current.

View 7 Replies View Related

AutoCAD Civil 3D :: Change Default Resize Behavior For Pipes?

Aug 25, 2008

Is there a way to change the default Resize behavior for pipes. I'd like to have it set to crown. I can change it for each pipe but that's gets tiring after a little bit.

HP 4600 4 GB Ram
Intel Core 2 Duo 2.66
ATI FireGL V5600 (8.391.2.1100)
Windows XP PRO (SP 3)
2008; (All SP) LDT, MAP 3D
2009; Civil 3d 2009 Update 1 Version 2, Map 3D, Raster

View 3 Replies View Related

AutoCAD Civil 3D :: Change Default Beginning Alignment Station?

Jun 4, 2007

where to change the default beginning station from 0+00 to 1+00 in my civil 3d profile template (dwt), so that the beginning station is always 1+00, unless the user changes it.

View 3 Replies View Related

AutoCAD Civil 3D :: Labeling A Pipe Between Structures

Sep 26, 2013

Any way to label a pipe part way between structures? I would like to be able to label a sanitary line where a service ties in with the main line invert.

C3D 2013

View 7 Replies View Related

AutoCAD Civil 3D :: Structures Rotated In Section?

Jul 17, 2013

I've placed generic Junction box structures right out of the box from C3D and when I cut a section, the section shows the wrong side of the structure. (Rotated)  i.e. An inserted 60”x36” junction box inserted as a curb inlet and then rotated into position will display the 60” side even though it’s perpendicular to the section line.

I've had to go back and place a 36”x60” to get it to display the 36” side in section? Why is there a “rotation handle” on the structure if you can’t really rotate it?I really don't want to swap all 60"x36" with 36"x60" structures just so they will display properly in section.

View 2 Replies View Related

AutoCAD Civil 3D :: Create CSV File For All Structures

May 21, 2013

I'm currently working on a very large Dwg, with multiple pipe networks both sanitary, Storm and pressure pipe.

I need to create a .csv file for all my structures for Stakeout. I know I can go into my toolbox and create a report through the reports manager.  The problem is that its giving me too much information, all I want is PNEZD.  How can I create this report or edit that report being generated?

View 3 Replies View Related

AutoCAD Civil 3D :: Labeling Structures In A Network?

Sep 26, 2013

I am labeling structures in a network on the profile view.  I cannot get the leader when i drag the label to anchor to the top of the structure?  Is there a way to do this, i figured out how to have the label insert at the middle of the top line of the structure.

Civil 2014-Infrastructure Design Suite
Windows 7 Professional-SP 1-64 bit system
Intel Core i5-2500K cpu @ 3.3ghz
NVIDIA GeForce GT 430
8.0 gb ram

View 1 Replies View Related

AutoCAD Civil 3D :: Structures Disappear During Synchronizing?

Nov 21, 2012

Seems to happen randomply, but my structures and labels disappear when synchronizing. 

View 7 Replies View Related

AutoCAD Civil 3D :: Structures Import As Null

Jun 25, 2013

I have set the migration defaults to my part list and the pipes come in as expected but all the structures come in as null? I even went as far as setting every option to my rect junction NF and they still come in as null?

View 2 Replies View Related

AutoCAD Civil 3D :: Cannot Extend Structures In Profile

Jul 18, 2013

I have added a pipe network to my profile view and for some reason the structures do not extend down to the inverts of the pipe. So the pipes are lower than the structures. I tried changing the sump, and the rim to sump (rim to sump can be editted but immediately goes back to what it originally was when you click apply. I've also tried clicking the structure and extending it downwards but it doesn't change. I've tried changing the stye and still have the same issue.

View 4 Replies View Related

AutoCAD Civil 3D :: Cannot Draw A Pipe Only Structures

Nov 23, 2012

in situation i can draw only a structure only. When i want to draw a pipe-there nothing happens. Is possibly that i erase something in Part builder command?

View 2 Replies View Related

AutoCAD Civil 3D :: Can't Label Certain Pipes / Structures

Mar 7, 2012

why I can't label certain pipes/structures?  I can select the pipe or structure, rt click, add label and I get nothing.  The layer is on cause I can see other labels. I also get the same result when I go to annotation, pipe label.   This only happenes to certain pipes or structure, others in the same network label fine.

View 9 Replies View Related

AutoCAD Civil 3D :: Structures Not Plotting With Publish

Aug 26, 2010

My storm drain profiles will not plot the structures if I publish. They plot ok if I use the plot command, but I'd like to be able to publish.

View 4 Replies View Related

AutoCAD Civil 3D :: Identify What Labels Structures Use?

May 9, 2012

Any way to easily identify what labels structures use? I have a plan and profile drawing drawing with 15 diferent layouts. Another guy worked on it and edited the contents on one of the profile structure labels. So now I'm going to have to go through each layout and looking for what structure labels would have been changed. Typicaly if there is a slight difference in the callout for one structure I'll just edit the label text for that one particular structure.

I would like to select (sweep) all the structures in profile and see which ones would have used this particular label style.

View 1 Replies View Related

AutoCAD Civil 3D :: Change Alignment Station Offset Label Default Layer?

Oct 29, 2012

how do you change their layer? i have been through the settings tab under "alignment", "station offset". i also right clicked on one and went through the properties.

View 4 Replies View Related

AutoCAD Civil 3D :: Points Creation / Change Default Local Coordinates Permanently?

Sep 27, 2012

I often create points manually. You get that dialogue box where you choose the layer and the default local coordinates, etc etc.

The local coordinates setting always defaults to Northing/Easting. (ditto the grid coordinates).

I set it to Easting/Northing as is standard around these parts and do my points, but if I close the box, when I reopen it to add more points later, it is back to Northing/Easting.

I cannot find a variable to control this behaviour.

I never need points to have north first and would like it to default to Easting/Northing at all times. Yes I'm using the Metric template.

Is there a way to change this default?

View 8 Replies View Related

AutoCAD Civil 3D :: Deflection Angle Label For Structures

Nov 12, 2010

Is there a way to show the deflection angle between incoming and outgoing pipes in a structure label? Or any label at all, for that matter? I know it can be done with alignments at the PI point, but only in the source drawing.

View 1 Replies View Related

AutoCAD Civil 3D :: Pipes And Structures - Max HGL Exceeding Elev Of Rim

Aug 22, 2012

In a run of pipes and structures, I have 3 structures that overflow.  2 of the structures max hgl els are even with the rim elevation (as is in the case of other runs in the same project), and 1 structure has the max hgl exceeding the elev of the rim.  Why this one and not the others?

View 2 Replies View Related

AutoCAD Civil 3D :: Converting Pipes And Structures Catalogs?

Oct 11, 2013

I'm trying draw profile, I see "compile error can't find project or library",

then I select "convert VBA pipe and structure rules to .NET" it works until I turn off civil 3d

how to do, that it works for everytimes?

View 3 Replies View Related

AutoCAD Civil 3D :: Customizing Pipes And Structures Report

May 24, 2012

I am attempting to customize a Pipes and Structures report but am having difficulty changing the % slope column to run over rise.

View 2 Replies View Related

AutoCAD Civil 3D :: Leader Attachment Options For Structures

May 8, 2012

I would like the Leader Attachment for a structure in dragged state to be at the bottom of the top line.  I have underlined the top line and would like the leader to extend from the underline.

Is there a way to add a "bottom of the top line" to the pull down menu, or control the leader attachment point in another way?

View 2 Replies View Related

AutoCAD Civil 3D :: Set Pipe Structures And Assign Own Rim Elevation?

Oct 21, 2013

Can you set pipe structures and assign your own rim elevation?  I don't want to use surface elevation.  

View 1 Replies View Related

AutoCAD Civil 3D :: Associate Multiple Structures To One Alignment

May 22, 2012

Is there any way to associate multiple pipe structures to one alignment. I spend half my time re-associating structures to alignments.

View 1 Replies View Related

AutoCAD Civil 3D :: Pipe Network Parts Change To Default When Data Referenced Into Other Drawing?

Dec 21, 2010

When creating my plan set, I need to data reference pipe networks into other drawings than that in which they were designed to show crossings in profile views or to separate out profiles into managable drawings. When I do this, if I have swapped a type-13 inlet for a 10' type R inlet or something during design, the data referenced pipe network will replace the 10' type R with a default inlet. Also if I have swapped a proposed 30" pipe for an existing 30" that have different styles, the data referenced pipe network will revert back to the proposed 30" pipe. how to make a data referenced pipe network reflect what is currently in the design drawing?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved