Using an old version of autocad 2012 in my laptop as backup loaded on Window 7. Everytime I used the snap mode it slow the movement of my cursor to move to specific location, but no problem using the Window XP.
View 3 RepliesMy cursor appears and disappears while in GIMP as I move the cursor over the canvas. I can make the cursor appear but only if there is no movement of the cursor. It makes no difference which tool I select, the size of the canvas, or the level of zoom.
Please note that this only occurs in Gimp, and none of my other applications. It started when I upgraded from openSUSE 12.1 to 12.2. I'm assuming that it has something to do with my input device configuration, but I could be totally wrong.
I have a total of 3 input devices - Core Pointer, Logitech USB-PS/2 Optical Mouse, and Virtual Core XTEST Pointer. Both the Optical Mouse and XTEST Pointer are DISABLED. Core Pointer is the only one enabled. Enabling Optical Mouse and XTEST Pointer give me other problems in Gimp and need to remain disabled.
For the Core Pointer, Mode is set to SCREEN, a message says that 'The axis X has no curve', and the following Axis Settings:
X 1
Y 2
Pressure none
xtilt none
ytilt none
wheel none
In Gimp Preferences->Input Controllers, there are three active controllers - Mouse Buttons, Main Mouse Wheel, and Main Keyboard.
OS: Linux 3.4.11-2.16-desktop i686
System: openSUSE 12.2 (i586)
KDE: 4.8.5 (4.8.5) "release 2"
Display Info:
Vendor: Intel Corporation
Model: G33
2D driver: intel
3D driver: Unknown Gallium (9.0.1)
How to keep the snap mode settings from disappearing after certain commands. For example every time I use a lisp routine I have to go and reset my settings because they are no longer the way I had them set before I performed the lisp command.
View 9 Replies View RelatedWe recently had a draftsman that drew with snap on (he no longer works here), and now all the drawings he worked on have this setting turned on. I thought it would be as simple as opening up the drawings and either hitting F9 or clicking on the toggle to turn off snap. That doesn't seem to be the case. Snap mode seems to be tied to individual sheets, and every viewport. I have multiple sheets in a drawing and each sheet has multiple viewports. The last thing I want to do is open every drawing, click in every viewport on every sheet to turn off snap.
I have snapmode set to 0, but it will only turn it of in whatever sheet or viewport is active. I have to write a lisp routine that will go through every viewport on every sheet to set snapmode to 0?
I have just got CS6 and I am having problems with the brushes tool when drawing, moving a cursor values, moving images and so on. Although I am moving the brush, on screen it appears as if it wasn't moving at all, and the circle around the brush appear, as if the brush was stationary, and a line starts to appear around the brush cursor creating a circle, when this circle is complete, it bring the left-click menu (when using brush tool).
It's frustrating, becase a 5 min job ends up taking 20mins instead. I'm having to do really exaggerated cursor movements for the circle to not appear around the cursor and actually register movement, but by that point, the movement is so exaggerated that it messes up the drawing or piece I am working with..This didn't happen with CS3 when I was using it yesterday, but has been happening since the beginning with CS6.
I just decided to try out Vista and installed the 32bit version. Following that I installed Photoshop CS3, but when using it some weird problem occurs.
When I use certain cursor types (for example the marquee tool or brush) the movement of the mouse feels a bit "laggy" or wobbly - it's difficult to describe. It's not as precise tracking as if I use move tool or the color picking tool (eyedropper tool it's called) - when I use these tools there are no problems at all and the cursor movement feels good.
This issue seems really odd to me - does anyone got some possible explanation to this?
For your information my hardware setup is like this:
Intel Q9450 2,66 Ghz cpu
4GB DDR2 memory
Asus P5K/EPU motherboard
Club3D 8800GTS 512MB graphics card
Razer Deathadder mouse
Starting in X6, I have seen that a group of artistic Text when selected and moved with the Arrow keys is slow and choppy to move to the new location. It seems like it may be trying to do too much calculation. It gives me concern because this is how a program would act just before it crashes. However CD X6-64 has not crashed on me yet.
View 3 Replies View RelatedThis was originally posted under 2009 - but I have this issue in 2010!
The old post was: Block Editor Posted: Aug 1, 2008 7:01 PM
When I go into block editor, edit the block then close it out. My cursor is really jerky in model space. Especially bad when I go into a command and try to select something. The only way to get rid of the jerkiness is to close auto cad and restart it. Is there anyway to cure this?
I have 2010 and am experiencing this exact same problem. It is intermittent and will sometimes 'go away' after a few minutes. Block editing is definitely related as a cause. I use SDI = 1 predominantly and it seems to be session independent. In other words one drawing session is experiencing the problem but jumping to another concurrent session exhibits no issues.
Task manager shows off the chart 99% plus on process ACAD when it is occurring.
Palette transparency is off globally. I have installed the latest NVidia driver for my Quadro NVS 285 video card. I am running a 3GHz P4 with 4 Gigabytes of ram - Dell Precision 380 workstation. Block Editor background color is default.
Restarting AutoCAD does make it go away - for the moment - but it is soon back. Even closing all tool palettes has no effect.
This does seem to be drawing specific - 2010 seems to be sensitive to something in older drawing blocks - prototype drawings from hotel vendors for instance - most likely inherited from a third party DXF process exhibit the issue heavily - and blocks from these drawings to a lesser degree. I have to constantly purge, audit, and wblock/replace my drawings to keep them clean. My default file type is 2010 which 'seems' to work, but it still happens. Audits show constant drawing errors cropping up, and repeating an audit, shows the same errors until a wblock replace is performed.
Somehow, the little triangle that opens and closes the Quick Develop Module in my Library has become solid, so it no longer pops the menu open when I glide my cursor over to the right side of a full screen image. How do I get the Quick develop module triangle to have that shadow look again so that when I glide the cursor to it the module opens.
I must have changed this with a keystroke or something but for the life of me I cannot get it back and it's driving me crazy. I do not like the module open all the time and it's a pain to use the keystroke or click the triangle each time I need to make a quick adjustment. I hope this is not an upgrade change. I notice it is the same in my develop module.
I'm not sure what i changed but when im trying to sketch a line usually the little cursor turns from yellow to green when it snaps to an edge or a center. but its not snapping, how to get my line snap back.
View 8 Replies View RelatedWe are not hitting F9, but the Snap Mode comes on. Not sure what is causing it. Not clicking it and not hitting F9. Is there anything else that can trigger the Snap Mode to "On"?
View 6 Replies View RelatedI can not get the cursor to snap to the grid in any size of grid.
Object snap works just fine.
I know I did something wrong, but what?
AC 12 Lt
Just installed upgrade to 2012 on same machine as 2011. Within the drawing area of both Model & Paper space, cursor is jumping and slow across screen.
View 5 Replies View RelatedI am running a new full version of AutoCAD 2014 on Windows 7 64 bit. It is litterally taking 5-7 seconds to zoom, switch pages, regen, or mostly anything else.
View 6 Replies View RelatedAccelerator Keys
My accelerator keys for the right-click object-snap cursor menu do not work. For example, I will be drawing a line and I will bring up the object-snap menu, then I will select ‘E’ for endpoint snap, the ‘e’ will display in the dynamic input window and the snap does not work.
I want to temporarily adjust the snap mode to nearest only.
Dim sval As String = Application.GetSystemVariable("OSMODE")
sval = "4133"
I know can change this variable using Application.SetSystemVariable("OSMODE", Val) but what value to change it to.
Inventor 2010
Some how I turned off the snap to end point in the sketch mode. where is the dialog box to control snap settings
I use GIMP 2.6.8 - when I switch to "path" tool or to "free select tool" mouse pointer is allowed to set vertices of the path or selection on non-integer coordinates (i.e. at x=13.5 and y=26.8 pixels)
How can I disable this feature and make mouse pointer (or vertex) snap to pixel boundary (or even to grid). I want it to be able to create paths / selections more accurately sometimes.
(or could I at least enter coordinates for each next vertex manually)
How do I get rid of the yellow dot behind the cursor in sketch mode?
View 2 Replies View Relatedmy cursor always remains in the "hand" - mode, so I can't use any tools anymore.
View 2 Replies View Relatedphotoshop getting really slow when work 3d mode. i have 4GB ram. is that not enough?
View 4 Replies View RelatedJust recently, when I am inputing new photos the system slows down to a crawl. All other modes have no problem with speed.
View 1 Replies View RelatedI have a user and when he's in sketch mode he trys to draw a line but it keeps on snapping to a grid. Both snap and grid setting are switched off. I can't find any settings he has different from my own set-up so I'm finding it hard to fox this problem. FYI, this user is a bit of a problem and tends to change settings without even realising he's doing it.
He's using Inventor 2012.
When i turn on overprint mode illustrator redraw is super slow. I made real siple file with two boxes from what one is overprinted.When i turn on overprint mode and try to move one of the box it will take time to redraw it on the new place and there is no drag view at all.
I need to use overprint mode quite often and its not an option right now with so slow redraw. Do i need to go back to use sc5?
How do you get rid of the 3-figure cursor when in the rectangle select mode?
View 2 Replies View RelatedI'm having a serious problem with the thumbnails in Library/Grid mode taking anywhere from 5-10 seconds to "pop in" the adjustments I've made in develop and/or via the quick develop tab. I need to quickly see if large batches of images are similar in color/exposure, and I've always used the Grid to compare them in bulk. Now it seems the previews refuse to update unless I hover over that image for an extended period of time. I've even tried jumping back and forth between Develop (in order to update the preview) and Library, but 8 times out of 10 it reverts to the old preview. I have tried:
1) Clearing my cache
2) Expanding the cache size from 3 GB to 10 GB to 40 GB with no avail
3) Optimizing the catalog
4) Updating Lightroom & Camera Raw
5) Removing Luminance/Sharpen adjustments from all the images
6) Reducing Preview size/quality
7) Using Smart Previews
Because of the sheer numbe of images I work with, I have to store them on an external drive, not my Mac (3.06 GHz Intel Core i3 and 16 GB DDR3 memory). Even when I edit images locally on the machine, I have this problem. All of my software and drives are up to date, and I've got around 90 GB free on my system. making my adjustments on faith and then "re-updating" the previews...but deleting the Smart Previews/Previews and recreating them doesn't seem to fix the problem.
Is there a way to get osnaps to work on pofile entities, specifically the internal grid lines and the proposed profile line?
View 3 Replies View RelatedFor some reason we cannot snap to the node on several of our point symbols. I cannot see anything different when compared to the other point symbols that we can snap too. Basically if i try to draw a line of obtain a distance using the NOD osnap on these point symbols i get nothing, its like they dont have a NOD to snap too.
View 9 Replies View RelatedObject Snap.jpg I want to pick the point where the circle hits the edge of the box but there seems to be no Intersection there. But they are on the same plane!
View 9 Replies View RelatedI have my surface, I'm seeing it in orbit view mode . (also it doesn't work on 2D...)
I'd like to create a 3d Poly using some points on the triangles of my surface....
I'd need a transparent Inquiry tool , to use when I create points or 3dpols
I think it is basic....
I know _AeccFeatureElevsFromSurf
but i'm talking about a 3d Snap....
Civil 3D (2013) how much you have to improve....
I want to snap to the PI of an offset alignment. Civil 3D refuses to find the snap point. I can't even use Apparent Snap from the 2 tangents.I've seen this behavior with other C3D objects and it is most aggravating. How do I snap to that point?
View 2 Replies View Related