When i turn on overprint mode illustrator redraw is super slow. I made real siple file with two boxes from what one is overprinted.When i turn on overprint mode and try to move one of the box it will take time to redraw it on the new place and there is no drag view at all.
I need to use overprint mode quite often and its not an option right now with so slow redraw. Do i need to go back to use sc5?
I¨m working on a RGB document; it´s not going to be printed, but I need to simulate the overprint effect and also to use some "out of gammut" RGB colors that display very different on CMYK. I have the overpirnt preview checked; also, the objects I want to overprint have the Overprint Fill checked on the Attributes window. I even tried converting to spot colors, since I got the "In RGB documents, overprinting only affects spots colors" message. Still, no overprint preview.
View 2 Replies View RelatedI have an action with a number of items to do prior to releasing/proofing a file to print. I can record overprint preview using insert menu item, but this toggles to on or off depedning on what the last.
View 5 Replies View RelatedI have an animation of a wine glass breaking. I simulated it using mass FX and particle flow. I will import it to After Effects, add finishing touches and render out a super slow mo clip like you would see on Discovery HD or Time Warp. In essence, I want it to look like it was shot on a high speed camera.
I tried a test render out of max at 960 fps and importing into AE at 25fps but the results aren't quite white I want.
My question is, what frame rate do I render the animation out inside 3ds max and what frame rate do I import/interpret it in After Effects?
The company I purchased AutoCAD 2012 Electrical from had no answers and referred me to Autodesk. Autodesk has told me I have to just live with it because they have no plans to fix the problem, even though they recognize the issue. So I turn to the largest user group I currently have access to.
When I print a drawing, regardless of page size, that contains and image, I have to wait upwards of 10 minutes before the printer sees the drawing and begins to print. The clients I work with use quite a few drawings that contain images and I have days where all I am doing is printing jobs because I have to wait so long.
I have tried to change the print drivers. The printers I use are HP Laser M5035. I connect to them through a network however I have tried to connect to them directly with the same results. The only thing I have found to speed up the proccess, which i find to be rediculous, is to print the job to PDF and then print the PDF to the printer.
I have had the AutoCAD retailer's technicians as well as the Autodesk technicians log into my computer remotely to fix this issue and both recognized the same issue but after a month of trouble shooting I am still at square one.
Before I upgraded to AutoCAD 2012E I had AutoCAD 2009E and printing drawings with images was not nearly as bad. If I did not have to have AutoCAD 2012E I would revert back but this is not an option.
i have a red file to 120 fps and convert a Pro Ress File. i want a more slow!
View 1 Replies View RelatedIn the blink of an eye, importing pics all of a sudden has become super slow. It now takes 5x longer to importing off of memory card. Also having issues with plugins I use for B&W & HDR.
Not certain what to do. Seems Catalog got jacked up somehow and no clue what to do to remedy it.
For some reason when I scrub through my animation, it runs really slow. And it has nothing to do with my computer itself. It is the particular file. I tested this by opening up one of my others (i saved in iterations) and they all scrub just fine. All I was doing was animating with a rig, so there isnt any extra polygons or whatever. And on top of that, it worked just fine before I exited the program earlier, I even playblasted it and everything, and then I looked at the playblast later and decided I wanted to change something, reopened the file, and the timeline has been chugging ever since. I tried opening and closing maya already.
View 1 Replies View RelatedIt is strange that it is still as optional view option. Why You can't see it always on? reason not to see overprints? We have at least 3 printing reruns this year, where objects lost in pages, just because they where made white from overprinted blacks.
View 15 Replies View RelatedI got a PDF today that (besides being just a complete and terrible mess) has a basic vector shape in a clipping mask that won't let me turn off the overprinting.
When I select the whole object with clipping mask, the Overprint Fill box (in the attributes panel) has a hypen. When I click into the clipping mask or go to Object > Clipping Mask > Edit Contents and I select just the vector shape, the Overprint Fill box has a check in it, and I uncheck it. Then when I exit out and reselect the whole object I get the hypen again. I can also uncheck the hypen and the box is blank, but then when I deselect and select it again I get that evil hypen again.
way to turn off overprinting for a single object in Acrobat Pro my mind will figuratively explode.
When I Place an Illustrator file inside onather illustrator file, the overprint elements failed to be overprint.
Why? Is there a bug because I use CS6, but when I tried using CS5.5 it works without any problems.
Here I created a file called single.ai, and set the text to Overprint Fill.
Here when you hide black color the orange color filled completely.
Then I created a file called Multiple, and placed then repeated it.
But as you see when I hide the black color the orange filled is etched (spoiled).
Some polygons of one vector layer do overprint and some not. Do you know what can be a cause ?
View 1 Replies View RelatedIs there any way to export the overprint preview as jpeg/pdf ?
View 4 Replies View RelatedIs there any way to turn overprint white feature off so Illustrator will not allow white to overprint?
View 1 Replies View RelatedIf I were to select some text, then checkmark 'Overprint Fill' in the 'Attributes' pane, is there a way to tell with JavaScript that the text was set to overprint?
I've been experimenting with this code in ExtendScript, but it keeps returning false:
var doc = app.activeDocument;
$.write(doc.textFrames[0].textPath.fillOverprint + '
');
I have a logo that I ultimatly need rendered properly in a PDF to send for proofing. It has a overprint effect in it but I can't figure out a way to export it as a tif or jpg with a simulated overprint.
What I have tried:
Export as tif and export as jpg (from Illustrator CS5). Neither export has a simulate overprint option, and both export with a big green blob on top of everything (the green blob is the shape that is overprinting)
Save as PDF, press ready, defaults to view of green blob (not simulated overprinting)
Save as PDF, change to PDF 1.3, in advanced flattening I set overprint to preserve, and high resolution. Same result as above.
In a PDF I can turn on the overprint preview, but I can't make that a default (as far as I know). Additionally, I am sending this to a client, I don't want to have to tell him "Oh, and by the way, here are the 10 steps to simulating overprinting in PDFs!"
Also I have tried to import from PDF to Photoshop and there is no option for simulated overprint there as well.
Also, I don't care if it is just a jpg or tif placed into a PDF, I don't need to preserve vector for this portion of it. If I can, then great, if there is a solution but I can't find, It is only for presentation at this stage.
I'm trying to export a layered PSD of my AI file and I keep having problems with it merging the layers because of the overprint settings.
I've been trying to go through and turn off the overprint in my objects, but I have a photo that's cropped by a rectangle shape, and the Overprint Fill option under Attributes is greyed out. What must I do?
Whenever I enable Overprint Preview Illustrator seems to add grids on/over my document.
When I disable it, it dissapears. I find this strange because to me the opposite sounds more logical.
Will these grids be printed if I choose to print?
Rather than drop shadows knock fuzzy holes in underlying separations, is there a way to set a Drop Shadoo to always overprint?
View 2 Replies View Relatedneed to know how to overprint color tif on white background
View 6 Replies View RelatedI want to overprint a PMS colors using Applescript. I though if I changed the property of the selected items fill color from (fill overprint:false) to (fill overprint:true) it would work. This doesn't seem to change a thing.
This is the script I am currently using:
script ChangeOverprint
tell application "Adobe Illustrator"
local docRef
[Code]....
This is the picture of a simple document I created. The elipse has fill overprint:true. The polygon has filr overprint:false. The original value for the property fill overprint was false. I changed it in the script to true. Which the log shows it changed.
Is there any way to export the overprint preview as jpeg/pdf ?
View 2 Replies View RelatedI prepare graphics mostly for print, so I like to turn on the Proof Colors view and Overprint Preview views. It's a pain to turn these on for each document. Is there a way to make these the default viewing settings in Illustrator CS6?
I tried creating an action to do it, but the Insert Menu Item command in actions causes Illustrator to crash every time, and the help file seems to say that View commands are unavailable to actions. So I'm not sure if that's a bug. Oddly, Photoshop has the very useful File> Scripts> Script Event Manager that let's me turn on Proof Colors (via an action) whenever a document is opened. It works very well. However, Illustrator does not appear to have these options. I found the View> New View options in Illustrator. They let me create a view that turns on Overprint Preview, but absolutely refuse to turn on Proof Colors. So it's the same number of clicks and pointless.
Illustrator CS6, v. 16.0.3 64-bit, Windows 7 Ultimate 64-bit
photoshop getting really slow when work 3d mode. i have 4GB ram. is that not enough?
View 4 Replies View RelatedJust recently, when I am inputing new photos the system slows down to a crawl. All other modes have no problem with speed.
View 1 Replies View RelatedI'm having a serious problem with the thumbnails in Library/Grid mode taking anywhere from 5-10 seconds to "pop in" the adjustments I've made in develop and/or via the quick develop tab. I need to quickly see if large batches of images are similar in color/exposure, and I've always used the Grid to compare them in bulk. Now it seems the previews refuse to update unless I hover over that image for an extended period of time. I've even tried jumping back and forth between Develop (in order to update the preview) and Library, but 8 times out of 10 it reverts to the old preview. I have tried:
1) Clearing my cache
2) Expanding the cache size from 3 GB to 10 GB to 40 GB with no avail
3) Optimizing the catalog
4) Updating Lightroom & Camera Raw
5) Removing Luminance/Sharpen adjustments from all the images
6) Reducing Preview size/quality
7) Using Smart Previews
Because of the sheer numbe of images I work with, I have to store them on an external drive, not my Mac (3.06 GHz Intel Core i3 and 16 GB DDR3 memory). Even when I edit images locally on the machine, I have this problem. All of my software and drives are up to date, and I've got around 90 GB free on my system. making my adjustments on faith and then "re-updating" the previews...but deleting the Smart Previews/Previews and recreating them doesn't seem to fix the problem.
Using an old version of autocad 2012 in my laptop as backup loaded on Window 7. Everytime I used the snap mode it slow the movement of my cursor to move to specific location, but no problem using the Window XP.
View 3 Replies View RelatedI have an indesign document with logo in it that I want to set to overprint. I have the logo selected, but the overprint fill box in the attributes panel is greyed out and I cannot select it. How can I get the logo to be set to overprint?
View 1 Replies View RelatedI currently have my preflight set up to detect Overprint errors. When they pop up, I'm usually able to either fix it directly in InDesign from the Attributes panel or modify the source eps in Illustrator. However, I am running into a situation on this particular file in which I am getting Overprint errors on linked TIF files. It's not letting me change it from within the Attributes panel of InDesign or from Illustrator. What can I do to get rid of these Overprinting errors?
View 1 Replies View RelatedHere to my issue:
In Corel Draw X6.1 I have a grayscale bitmap that I want to set as overprint over a rectangle with 60% (cmyk) black. This does not work as the white box is visible in both the preview and separations. If I set the rectangle to a spot colour it works, but in separations I get the image on a separate plate (colour) which is not what I need. I tried duotone vs cmyk, duotone vs spot, spot vs spot, etc none works, every time I have the same color for the bitmap and the rectangle it does not work.
After installing an update to Illustrator 17.1 from the Cloud a few days ago I've noticed there is a significant hit in the performance. It runs really slow! Even with simple documents with just a few layers. I opened more complex ones and it's super painful to work. I have to wait a few seconds when selecting or moving a layer. I really want to go back to CC 17.0, As for the system I have the newest Mac Pro form the previous generation (before the trash can model) - Intel Xeon 6-core 2x2.4 with 28 gb of memory ram. Running Mac OS X 10.7.5. Graphic card: ATI Radeon HD 5870.
View 6 Replies View Related