AutoCad 2D :: Trigger Snap Mode To On?
Oct 23, 2013We are not hitting F9, but the Snap Mode comes on. Not sure what is causing it. Not clicking it and not hitting F9. Is there anything else that can trigger the Snap Mode to "On"?
View 6 Replies
ADVERTISEMENT
AutoCad :: Turn Snap Mode Off Globally (Snap Not Osnap)
Nov 8, 2011We recently had a draftsman that drew with snap on (he no longer works here), and now all the drawings he worked on have this setting turned on. I thought it would be as simple as opening up the drawings and either hitting F9 or clicking on the toggle to turn off snap. That doesn't seem to be the case. Snap mode seems to be tied to individual sheets, and every viewport. I have multiple sheets in a drawing and each sheet has multiple viewports. The last thing I want to do is open every drawing, click in every viewport on every sheet to turn off snap.
I have snapmode set to 0, but it will only turn it of in whatever sheet or viewport is active. I have to write a lisp routine that will go through every viewport on every sheet to set snapmode to 0?
AutoCad :: Lost Snap Mode To Grid?
Sep 15, 2012I can not get the cursor to snap to the grid in any size of grid.
Object snap works just fine.
I know I did something wrong, but what?
AC 12 Lt
AutoCAD .NET :: Temporarily Adjust Snap Mode To Nearest Only?
Nov 25, 2011I want to temporarily adjust the snap mode to nearest only.
Dim sval As String = Application.GetSystemVariable("OSMODE")
sval = "4133"
I know can change this variable using Application.SetSystemVariable("OSMODE", Val) but what value to change it to.
AutoCAD Inventor :: Turned Off Snap To End Point In Sketch Mode?
Oct 19, 2011Inventor 2010
Some how I turned off the snap to end point in the sketch mode. where is the dialog box to control snap settings
AutoCAD Civil 3D :: Snap Mode Slow Down Movement Of Cursor
Apr 5, 2013Using an old version of autocad 2012 in my laptop as backup loaded on Window 7. Everytime I used the snap mode it slow the movement of my cursor to move to specific location, but no problem using the Window XP.
View 3 Replies View RelatedAutoCAD Civil 3D :: How To Keep Snap Mode Settings From Disappearing After Certain Commands
Sep 18, 2013How to keep the snap mode settings from disappearing after certain commands. For example every time I use a lisp routine I have to go and reset my settings because they are no longer the way I had them set before I performed the lisp command.
View 9 Replies View RelatedAutoCAD Inventor :: Sketch Mode Snaps To Grid But Snap And Grid Are Both Switched Off?
Jul 23, 2012I have a user and when he's in sketch mode he trys to draw a line but it keeps on snapping to a grid. Both snap and grid setting are switched off. I can't find any settings he has different from my own set-up so I'm finding it hard to fox this problem. FYI, this user is a bit of a problem and tends to change settings without even realising he's doing it.
He's using Inventor 2012.
AutoCad 3D :: Object Snap Doesn't Snap At Intersection?
May 6, 2012Object Snap.jpg I want to pick the point where the circle hits the edge of the box but there seems to be no Intersection there. But they are on the same plane!
View 9 Replies View RelatedCorelDRAW X6 :: 6.2 SNAP - Cannot Get Snap To Grid To Turn Off
Nov 30, 2012Snap commands in X6? I can not get the snap to grid to turn off. The button is off and the setting is set to off in options. Objects seem to snap all over not just to the grid. And the grid snap seems to be out of alignment-I cant seem to get objects to snap exactly to the grid.
The same files reopened in X5 are fine. This started with yesterdays install of 6.2. leaving X2 completely unusable.
AutoCAD .NET :: Trigger Autosave
Sep 27, 2013is it possible to trigger an Autosave before executing my vb.net-code? I'm rather new to vb.netcode and in case of an unexpexted error AutoCad sometimes crashes. If I Could trigger an auto-save before the code is run, no information in the drawing is lost, but can be obtained in an autosave-file.
I cannot trigger a Save of SaveAs, because i don't know if the user wanted to save the drawing, for examples if the user reads an older drawing, removes/deletes objects etc, but is unaware of the drawing being saved, it could result in problems.
AutoCAD Inventor :: ILogic Trigger In Drawing
Sep 18, 2013I have a few assemblies setup that are controlled with a bunch of iLogic rules to modify all related parts when parameters are changed at the assembly level. I also have an opening message that pops up when the assembly model is opened (After Open Document trigger) to tell people how to use the parameters to make modifications.
Now, when this assembly model is placed into a drawing I am getting random pop ups of the opening message when placing views of additional models in the same drawing. If you open the drawing and try to place a base view of another model, Inventor stops to think for a minute or so before having the opening message of the iLogic controlled model pop up. The only event trigger for this message is "After Open Document" and the model is not being opened; why it is being triggered in the drawing and/or how to make it stop?
AutoCAD Inventor :: Trigger ILogic Rules Using API?
Mar 29, 2011I am currently using a vb.net application to control inventor using the API code.The API code is used to delete/suppress unwanted occurances from parts and sub-assemblies, depending on what is selected in the external application. It then puts all the parts and sub-assemblies together into a final assembly.
Most of the parts contain iLogic rules, to control dimensions, and these have been set to trigger when the part file is opened.I have noticed that in my final assemblies some of the parts don't appear as they should, however if i close the final assembly and open the individual part it appears to be correct. If i then open the final assembly it looks fine.
I think this might be due to the iLogic rule being triggered when the part is opened.Is there any way to trigger the rules using the API code while the final assembly is open, instead of closing it down and opening all the component parts and sub-assemblies?Or should we set the rules to trigger on a parameter change?
AutoCAD Inventor :: ILogic Form Trigger
Nov 29, 2012I have a ipt which is controlled via an ilogic form,this form is opened by ilogic code, which in turn is triggered when the ipt is opened.
my problem is when the part is placed within an assembly the said form is triggered and the same happens when the assembly is reopened!.... I would prefer if the form opened only when the ipt is opened or edited....
Is there a snippet of code for this? Or is it even possible?
AutoCAD Inventor :: New Event Trigger For ILogic
Dec 8, 2011Is there any chance to define an event trigger which runs an iLogic rule when we check out an already open file? Problem is, that we need to synchronize iProperties on check out to clear "Approved by" when Vault State of Part is "under revision"
Vault Parameter "State" is mapped with iProperty "State".
So I want to run the following on check out:
Call ThisApplication.CommandManager.ControlDefinitions.Item("VaultPropertyWriteBack").Execute2(True)
AutoCAD Inventor :: How To Trigger An ILogic Rule
Jun 26, 2012I have an iPart which includes iLogic Rule. When I change iPart by table, iLogic Rules are not triggered.
In iLogic Utilities, there is a button "Rules Triggered by Events", If I use "Any Model Parameter Change", the update need long time, looks like Inventor is "No Response". I like the way "Material Change", but I need "part Number" change to trigger the rules. How can I do it? I tried other events as After Open, Before Save, etc, they are does not work.
AutoCAD .NET :: How To Trigger Attribute Changes In Properties Panel
Mar 15, 2012I don't like really to have an object modify event all the times running . Now question is if user go to properties panel and change the attribute over there. How could I catch the event?
View 1 Replies View RelatedAutoCAD Inventor :: ILogic - How To Trigger Standalone EXE
Aug 10, 2012Is it possible to have an iLogic rule trigger a standalone .exe?
View 4 Replies View Related3ds Max :: How To Snap One Object To Other With Vertex Snap
Apr 18, 2011I'm trying to snap one object to the other with vert snap.
It's trying to snap from the center of my object rather then the vert I am hovering over. In the Snap settings I have only "vertex" checked so it should snap to whatever vertex I hover over but no...This keeps up I'm going back to 2008 when all this worked fine.
AutoCAD .NET :: What Event Does The System Trigger When Close A Palette
Jul 25, 2011I am using VB.net created a palette。 I need to call refresh drawing(my own function) when user close this palette. But I don't know which event I need to put my code in.
View 8 Replies View RelatedAutoCAD Inventor :: Trigger Custom Add-Ins Button Through ILogic
Feb 10, 2012I'm also trying to find a way to trigger an "Add-Ins" button that we have customized, and have it pop up on the closing of a form.
View 4 Replies View RelatedAutoCAD Inventor :: Trigger Custom Add-Ins Button Through ILogic
Feb 14, 2012I'm trying to find a way to trigger an "Add-Ins" button that we have customized, and have it pop up on the closing of a form. If you know a way to program how to close a form through iLogic, or find a way to see if it's still open
I'm not sure that I actually want to access the button per say, but instead launch the dialog box. I'm not sure if this differs your answer in any way, but I searched the customization forum and found little information.
AutoCAD Inventor :: Trigger (Save And Send To Cloud) Function In API?
Feb 10, 2013Is there anyway to trigger the "Save and Send to Cloud" function in the API?
View 1 Replies View RelatedAutoCAD Inventor :: Trigger Place Component Triad For Any Occurrence
Oct 21, 2013I love the new triad function when placing a new part in Inventor 2014: I am now searching to trigger the same function for a part that already has been placed.
Something like:
1) select component
2) press a button (triggers the macro I now want to write)
3) the triad pops up.
I searched true the Inventor Help & what's new in the API. But didn't find any reference to that command. So I am afraid that it is not yet in the API. Could I maybe emulate it by replacing a component with itself using the place component command + emulating a mouseclick at the same origin as the original piece?
So a piece of code like:
1) get filelocation of selected part
2) get the origin point (x,y,z) of the part
3) get the translation between the origin of the assembly and the part
4) delete the selected part
5) place the part using the place component command (so the triad has been triggered)
6) fill in the filelocation, origin & translation
7) give control back to the user so he can move the part using the triad.
AutoCAD Inventor :: API - Set An Event Trigger For An Ilogic Rule In A Document
Nov 3, 2011Is there a way to set the event trigger of an ilogic file that's already inside of a document? I have code that can automatically create and populate new rules across my assembly parts, but it would be nice to set certain rules to fire every time that part gets saved.
If it can't be accomplished outright from the API, would it be possible to throw an OnEvent (save event in this case) inside of the iLogic code, to get the same results? URL...
AutoCAD Inventor :: Add External ILogic Rule Under Event Trigger Via API
Sep 22, 2011Is it possible to place an external iLogic rule under a specific Event Trigger in a file via the API?
Inventor Professional 2014 64 Bit
Windows 7 Professional
NVIDIA Quadro FX 4600
Dual Intel Xeon E5540 CPUs
16GB DDR3 Ram
AutoCAD Inventor :: Check Which Trigger Started ILogic Rule
Nov 15, 2013I'm making some ilogic code for my new drawing templates and I'd like run part of the code only when the rule is trigger by the "after open document" trigger. Is there a way to check which trigger started an iLogic rule or would I be stuck making a second rule which is only triggered by the "after open document" trigger?
View 2 Replies View RelatedAutoCAD Inventor :: Adding ILogic Rule To Event Trigger With VBA
Jul 11, 2013How to get the API to add an iLogic Event Trigger but I cannot find the exact code on how to do it.
Is there a Simple way to add an Ilogic Rule (External or Internal) to an event trigger with a VBA Macro or iLogic Rule?
I would like to automate adding an iLogic rule to an Event Trigger when we update our old drawings.
The details of the Rule I am trying to call is as follows:
Rule Name = Save On Close Commands
Event = Before Close
We currently have Inventor 2013 and 2014. If it is not possible in 2013, is it possible in 2014?
get the Rule Added to the Event Trigger
AutoCAD Inventor :: 2010 Ilogic Custom Event Trigger?
Sep 18, 2012Using Ilogic 2010 I wish to trigger my rule on sheet change. Is this something that can be done? I am using it to zoom the drawing on sheet change.
View 1 Replies View RelatedAutoCAD 2013 :: Annotation Scale Option Is Displayed Only In Model And Viewport Mode But Not In Layout Mode
Mar 14, 2013“annotation scale” on the lay out mode,
I’m not sure about the current “annotation scale” in case of lay out mode.
Annotation scale option is displayed only in the model and viewport mode but not in the lay out mode (attached)!
Based on what annotative objects living on the lay out but neither in the model (or viewport) are re-sized? At this mode, there is no option to choose the annotation scale?
On other words, how to choose the annotation scale in the lay out mode?
AutoCAD Inventor :: When Specific Symbol Is Inserted To DWG Needs To Trigger ILogic Rule
Oct 3, 2013I have a symbol that when I insert it into my dwg, I would like it to trigger a rule to create custom properties and fill out those properties. Ive already created a rule that is 100% working, I am just curious if its possible to have that rule triggered when I insert a specific symbol?
View 3 Replies View Related