I am using VB.net created a palette。 I need to call refresh drawing(my own function) when user close this palette. But I don't know which event I need to put my code in.
View 8 RepliesIs there any chance to define an event trigger which runs an iLogic rule when we check out an already open file? Problem is, that we need to synchronize iProperties on check out to clear "Approved by" when Vault State of Part is "under revision"
Vault Parameter "State" is mapped with iProperty "State".
So I want to run the following on check out:
Call ThisApplication.CommandManager.ControlDefinitions.Item("VaultPropertyWriteBack").Execute2(True)
Is there a way to set the event trigger of an ilogic file that's already inside of a document? I have code that can automatically create and populate new rules across my assembly parts, but it would be nice to set certain rules to fire every time that part gets saved.
If it can't be accomplished outright from the API, would it be possible to throw an OnEvent (save event in this case) inside of the iLogic code, to get the same results? URL...
Is it possible to place an external iLogic rule under a specific Event Trigger in a file via the API?
Inventor Professional 2014 64 Bit
Windows 7 Professional
NVIDIA Quadro FX 4600
Dual Intel Xeon E5540 CPUs
16GB DDR3 Ram
How to get the API to add an iLogic Event Trigger but I cannot find the exact code on how to do it.
Is there a Simple way to add an Ilogic Rule (External or Internal) to an event trigger with a VBA Macro or iLogic Rule?
I would like to automate adding an iLogic rule to an Event Trigger when we update our old drawings.
The details of the Rule I am trying to call is as follows:
Rule Name = Save On Close Commands
Event = Before Close
We currently have Inventor 2013 and 2014. If it is not possible in 2013, is it possible in 2014?
get the Rule Added to the Event Trigger
Using Ilogic 2010 I wish to trigger my rule on sheet change. Is this something that can be done? I am using it to zoom the drawing on sheet change.
View 1 Replies View RelatedOn the stage I have a button and a hidden symbol. The symbol has an animation within itself.When I click the button, the symbol becomes visible and plays the animation. Its all good so far.I want to be able to click the now visible symbol, the animation within itself plays in reverse and then it hides itself. How do I make it hide itself after the animation plays in reverse?
BUTTON CODE (This works for me):
sym.$("AnimationOne").show();
var AnimOne = sym.getSymbol("AnimationOne");
[code]...
If I add this, it just hides itself without animating in reverse
How can I log in a file the start and close event of Autocad?
View 1 Replies View RelatedHow can I catch the event when I change the container inside a palette?
View 3 Replies View RelatedI haven't been in programming for AutoCAD in a while, and I have created a new Palette Set and have set it up to work around AutoCAD's intricacies, but I can't seem to stop the crash when closing Autocad error. (harmless to the user at that time, but very annoying). Here is my Palette Set activation and maintenance
Imports System.Windows.FormsImports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.WindowsImports Autodesk.AutoCAD.GeometryImports Autodesk.AutoCAD.EditorInputImports Autodesk.AutoCAD.DatabaseServices.FiltersImports Autodesk.AutoCAD.ApplicationServicesImports Autodesk.AutoCAD.DatabaseServicesImports System.DrawingImports.
[code]....
Because there is no way to tell the difference between minimize ("-") to close ("x") on palette set. I put a button on my user control to write my own code to close the Palette Set.
m_ps is the current PaletteSet, m_uc is my user control which has been loaded into m_ps.
what code I need to write inside my close button click event to unload m_uc , close m_ps and set both m_uc and m_ps to nothing?
I have a button which has a mousover/mousout animation. When i click the button, it will shrink down to 0%. when it does, my mousout event is triggert, which i dont want.
how can i disable the mousout event after the click event?
Is it possible to add the Properties Palette to a custom made palette set in .NET? And how to do this?
View 3 Replies View Relatedis it possible to trigger an Autosave before executing my vb.net-code? I'm rather new to vb.netcode and in case of an unexpexted error AutoCad sometimes crashes. If I Could trigger an auto-save before the code is run, no information in the drawing is lost, but can be obtained in an autosave-file.
I cannot trigger a Save of SaveAs, because i don't know if the user wanted to save the drawing, for examples if the user reads an older drawing, removes/deletes objects etc, but is unaware of the drawing being saved, it could result in problems.
We are not hitting F9, but the Snap Mode comes on. Not sure what is causing it. Not clicking it and not hitting F9. Is there anything else that can trigger the Snap Mode to "On"?
View 6 Replies View RelatedI wan´t to delete a palette from Autocad Tool Palette. How can I do?
View 3 Replies View RelatedI have had Window 7 64 bit operating system put on my computer.Will I get the benefits of additional Ram on Photoshop CS6 Extended?
View 1 Replies View RelatedI have a few assemblies setup that are controlled with a bunch of iLogic rules to modify all related parts when parameters are changed at the assembly level. I also have an opening message that pops up when the assembly model is opened (After Open Document trigger) to tell people how to use the parameters to make modifications.
Now, when this assembly model is placed into a drawing I am getting random pop ups of the opening message when placing views of additional models in the same drawing. If you open the drawing and try to place a base view of another model, Inventor stops to think for a minute or so before having the opening message of the iLogic controlled model pop up. The only event trigger for this message is "After Open Document" and the model is not being opened; why it is being triggered in the drawing and/or how to make it stop?
I am currently using a vb.net application to control inventor using the API code.The API code is used to delete/suppress unwanted occurances from parts and sub-assemblies, depending on what is selected in the external application. It then puts all the parts and sub-assemblies together into a final assembly.
Most of the parts contain iLogic rules, to control dimensions, and these have been set to trigger when the part file is opened.I have noticed that in my final assemblies some of the parts don't appear as they should, however if i close the final assembly and open the individual part it appears to be correct. If i then open the final assembly it looks fine.
I think this might be due to the iLogic rule being triggered when the part is opened.Is there any way to trigger the rules using the API code while the final assembly is open, instead of closing it down and opening all the component parts and sub-assemblies?Or should we set the rules to trigger on a parameter change?
I have a ipt which is controlled via an ilogic form,this form is opened by ilogic code, which in turn is triggered when the ipt is opened.
my problem is when the part is placed within an assembly the said form is triggered and the same happens when the assembly is reopened!.... I would prefer if the form opened only when the ipt is opened or edited....
Is there a snippet of code for this? Or is it even possible?
I have an iPart which includes iLogic Rule. When I change iPart by table, iLogic Rules are not triggered.
In iLogic Utilities, there is a button "Rules Triggered by Events", If I use "Any Model Parameter Change", the update need long time, looks like Inventor is "No Response". I like the way "Material Change", but I need "part Number" change to trigger the rules. How can I do it? I tried other events as After Open, Before Save, etc, they are does not work.
I don't like really to have an object modify event all the times running . Now question is if user go to properties panel and change the attribute over there. How could I catch the event?
View 1 Replies View RelatedIs it possible to have an iLogic rule trigger a standalone .exe?
View 4 Replies View RelatedI'm also trying to find a way to trigger an "Add-Ins" button that we have customized, and have it pop up on the closing of a form.
View 4 Replies View RelatedI'm trying to find a way to trigger an "Add-Ins" button that we have customized, and have it pop up on the closing of a form. If you know a way to program how to close a form through iLogic, or find a way to see if it's still open
I'm not sure that I actually want to access the button per say, but instead launch the dialog box. I'm not sure if this differs your answer in any way, but I searched the customization forum and found little information.
Is there anyway to trigger the "Save and Send to Cloud" function in the API?
View 1 Replies View RelatedI love the new triad function when placing a new part in Inventor 2014: I am now searching to trigger the same function for a part that already has been placed.
Something like:
1) select component
2) press a button (triggers the macro I now want to write)
3) the triad pops up.
I searched true the Inventor Help & what's new in the API. But didn't find any reference to that command. So I am afraid that it is not yet in the API. Could I maybe emulate it by replacing a component with itself using the place component command + emulating a mouseclick at the same origin as the original piece?
So a piece of code like:
1) get filelocation of selected part
2) get the origin point (x,y,z) of the part
3) get the translation between the origin of the assembly and the part
4) delete the selected part
5) place the part using the place component command (so the triad has been triggered)
6) fill in the filelocation, origin & translation
7) give control back to the user so he can move the part using the triad.
I'm making some ilogic code for my new drawing templates and I'd like run part of the code only when the rule is trigger by the "after open document" trigger. Is there a way to check which trigger started an iLogic rule or would I be stuck making a second rule which is only triggered by the "after open document" trigger?
View 2 Replies View RelatedI have a symbol that when I insert it into my dwg, I would like it to trigger a rule to create custom properties and fill out those properties. Ive already created a rule that is 100% working, I am just curious if its possible to have that rule triggered when I insert a specific symbol?
View 3 Replies View RelatedI'm trying to create a rule in ilogic that would search through all child components (looking for both .ipt and .iam file types) looking for an ilogic rule within each child component with a particular name, and running that rule if it is found.
View 1 Replies View RelatedWhat I need is a trigger saved within a drawing dwg file which if found will launch a lisp to run if the trigger is not present in the dwg the lisp will not run.
If memory serves me correctly the trigger was managed by creating a unique table search item saved in the actual dwg file. A start-up lisp would then search for it and if found it would run the lisp if not it would simply continue as if nothing happened.