AutoCAD .NET :: Palette Set Crashes At Close
Jul 12, 2012
I haven't been in programming for AutoCAD in a while, and I have created a new Palette Set and have set it up to work around AutoCAD's intricacies, but I can't seem to stop the crash when closing Autocad error. (harmless to the user at that time, but very annoying). Here is my Palette Set activation and maintenance
Imports System.Windows.FormsImports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.WindowsImports Autodesk.AutoCAD.GeometryImports Autodesk.AutoCAD.EditorInputImports Autodesk.AutoCAD.DatabaseServices.FiltersImports Autodesk.AutoCAD.ApplicationServicesImports Autodesk.AutoCAD.DatabaseServicesImports System.DrawingImports.
[code]....
View 5 Replies
ADVERTISEMENT
Jul 23, 2012
Because there is no way to tell the difference between minimize ("-") to close ("x") on palette set. I put a button on my user control to write my own code to close the Palette Set.
m_ps is the current PaletteSet, m_uc is my user control which has been loaded into m_ps.
what code I need to write inside my close button click event to unload m_uc , close m_ps and set both m_uc and m_ps to nothing?
View 5 Replies
View Related
Jul 25, 2011
I am using VB.net created a palette。 I need to call refresh drawing(my own function) when user close this palette. But I don't know which event I need to put my code in.
View 8 Replies
View Related
Jan 8, 2014
I just upgraded to ACAD Mech 2014 from 2011. When I import my palettes and try to use them, the program crashes every time (fatal error and send report to Autodesk).Think I'll have to rebuild the palettes in 2014 for them to work?
View 1 Replies
View Related
Feb 15, 2013
Anytime open a file, Any file and then close Photoshop, Photoshop crashes before it has completely closed, I'm using Photoshop CS6 extended v13.01 x32 on Windows 7
View 1 Replies
View Related
Jan 12, 2013
I have run Revit 2012 on this computer without any issues, but recently switched to Revit LT 2013 and have been having a tremendous amount of problems with it crashing. I am working on a quad core i7 laptop with 32 gb of ram and a Nvidia GeForce video card with 4gb of ram. The operating system is Window & 64 bit.
When I initially installed 2013 it would randomly crash on close. The file was always saved even if I didn't save before close and let it save through the closing process. It would send a report to Autodesk, but this was an error that I could honestly live with since it didn't cause problems while I was working.
On rare occasions it would crash while I was working in the program. No warnings, and no report to Autodesk, it would just close and not save what I had been working on. Becoming a bigger fan of constantly saving.
It also crashed when I was working in the file manager either opening, doing a save as, etc. I narrowed this arrow down to clicking on a folder with the right mouse button (hoping to rename the folder). The easy fix was to stop doing that.However, recently it seems to have begun to crash far more often, many times at ten to fifteen minute intervals. Some of the occasions it occurs at are:
-trying to change the end location or arc of a leader
-editing the boundary of a fill region (when launching the trim command)
-using the paste command to copy line work from one detail to another.
Each time it will crash it will come up with the window that the program has stopped working and windows is looking for a solution. Eventually windows closes the program.
I have tried turning off the 3d acceleration in Revit and that had disasterous results. Revit would load but immediately when loading a file and trying to display the image/drawing.
View 4 Replies
View Related
Feb 2, 2012
Is it possible to add the Properties Palette to a custom made palette set in .NET? And how to do this?
View 3 Replies
View Related
Dec 7, 2012
I wan´t to delete a palette from Autocad Tool Palette. How can I do?
View 3 Replies
View Related
Jul 17, 2013
For some reason, the tool palette I usually use is not accessible. I opened a drawing that a co-worker was using and my tool palette now looks like an old version - it doesn't have any of my custom tools in it. How do I get back my tool palette??
View 1 Replies
View Related
Mar 8, 2012
I've only ever used gimp sparingly and for simple stuff. I now need to set the palette of a 8-bit png to a specified palette, but I can't find any in gimp or online about how to load a palette. I need the palette to contain colors that may not be in the image if thats possible as these images are sprites of under 40 colors, but I need a full 256 color palette. Also is there any simple way to convert a string of numbers into a gimp palette? If not Ill probably just look at how they are saved and just write a simple script, but I thought i would ask.
View 5 Replies
View Related
Mar 22, 2012
I'm trying to create a menu macro to close and dont save the drawing without it prompting me.
View 1 Replies
View Related
Nov 1, 2011
I am trying to build a robotic head using the surface modeling and thereafter thicken the surface to form solid. I was not able to load the original model as the file size is exceeded. I use a derive model and the problem is similar.
View 9 Replies
View Related
Jul 12, 2012
I'm looking for a script that makes automatically PDF AND DXF when i close a IDW drawing.
So on close export to PDF and DXF
View 2 Replies
View Related
Oct 12, 2010
When I attempt to close a drawing I get the following message in the command bar. _CLOSE command CLOSE is not available under SDI mode. and the drawing will not close. what SDI mode is and how I can close the drawings.
View 3 Replies
View Related
Mar 1, 2012
If you have more then 1 dwg opened, and you close 1 dwg, wants to close the other dwgs as well?
View 7 Replies
View Related
Jul 20, 2013
I call an instance of an inventor using inventor api ,vb.net code. here is my code
inventorApp = CreateObject("Inventor.Application", "")
inventorApp.Visible = True
My doubt is and how can I close this inventor instance.I tried
inventorApp.Visible = False
View 1 Replies
View Related
Oct 8, 2011
I need to copy and rename my current drawing then open the copied drawing, and I need to close the original drawing.
However when I try to both open the renamed drawing and close the original drawing (in the code below), the original drawing will not close.
If I don't open the renamed drawing, the following code works and I can close the original drawing.
[CommandMethod("TestClose", CommandFlags.Session)] public void TestCloseDocument() { string fullName = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Name; string projectDirectory = System.IO.Path.GetDirectoryName(Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Name);
[Code] .....
View 3 Replies
View Related
Mar 21, 2013
I've run into this problem with different sketch types when curves cross each other and are trimmed, or when patterned sketches are coincident. The problem I'm having is that I'm creating a ratchet wheel and I'm patterning a sketch in two parts so that the spacing for the teeth line up. What I do first is draw the angled line of the tooth, do a circular pattern of 20 teeth around the origin, an then create an arc from the bottom point of each line to the tip of the next line to create the back of the tooth. When I try to extrude it, it says the loop is not closed, but when I do the repair, it says it overconstrains the sketch and is not possible. I've tried creating this profile using a center circle that intersects the bottom of the teeth and it does not work either. I was able to make the profile I needed by making one tooth, extruding it, patterning the feature, and then creating a circular sketch in the middle and extruding it. The problem with this (aside from requiring additional steps not needed in other programs) is that when I needed to go back and change tooth dimensions, it can't rebuild the sketch.
I attached two different sketches of the non-closed profile as well as the solid ratchet piece that I made using the pattern feature command that has the teeth that can't be easily edited.
View 4 Replies
View Related
Jun 5, 2013
We have two computers running AutoCAD 2013 with Windows 7 64 bit and both crash regularly on save and close with about 2/3 of the drawing files. Typically it won't crash if I have only one drawing file open and then save and close. With more than one file open the system crashes regularly on both computers. Our service pack updates are current.
View 1 Replies
View Related
Apr 11, 2012
Suddenly I got this issue when I draw an area boundary its not possible to close it with "enter" or "spacebar"..
View 9 Replies
View Related
Feb 7, 2013
Since AutoCAD preserves the entire database list of commands used on a drawing from the beginning, is it possible to "back up," like using undo, after a drawing is saved and closed? Is there a way to come back the next day and start undoing the previous day's work?
View 4 Replies
View Related
Aug 22, 2013
i use autocad lite 2012 and it works fine except for when i edit a block (either block editor or block in place) when i open the block i can edit it fine but then when i go to close the block and save changes my computer will usually lag and most likely autocad will crash. i then lose all the work that i did in the block. i don't know how to fix this problem but it takes time out of the day. and always have to redo the work.
sometimes editing the block will only lag when it closes for after 10 seconds and other times it never goes back to the model and cad crashes
a side note is that i tried REFEDIT and the same problem still happens.
View 9 Replies
View Related
Jan 16, 2012
I have this pan open I left side of my AutoCAD 2010. How can I close it?
I don't see any cross on top of the pan to close it.
View 1 Replies
View Related
May 23, 2013
When I change the scale of my floor plan in the layout from 1/8"=1'0" to 3/32"=1'0", my doors "close." It's so strange. The swings disappear and all the doors, and cased openings are closed.
I changed my Ltscale to 1, thinking that was the problem, but no.When I change the scale back to something larger, they come back!
View 9 Replies
View Related
Nov 21, 2012
I am missing entities when I try to pick on them.Not window, not crossing. Just trying to pick an entity. I usually select entities first before my command.
Is there a variable that might have changed? I played with PICKBOX & APERTURE but this doesn't change anything when I try to select something. I can have the entity in the box right next to the intersection of the crosshairs and instead of selecting the entity it starts to window.
I have a logitech m705 mouse w/ setpoint software ver 6.32.7 & driver ver 5.33.14 installed.
View 6 Replies
View Related
Dec 17, 2013
AutoCAD 2010. I was editing a block in the block edit screen and it wouldnt save the block. My screen froze and I had to reboot the computer. Now when I open the drawing it is still in the block edit screen and I cant get out of it.
View 9 Replies
View Related
Mar 15, 2012
I am using Inventor 2012 and C#. I would like that, when I close my Form, Inventor and all files that are open will be closed with displaying the message about saving the files .Some of my opened file are stored in Lists.
This code das not work Inventor still asking me about saving the files.
private void Form1_FormClosed(object sender, FormClosedEventArgs e)
{
if (InventorOpen._started)
{
oDrawDoc.Close(false);
foreach (Inventor.AssemblyDocument openAssemDocument in openAssemDocumentsList)
{
openAssemDocument.Activate();
[code]....
View 8 Replies
View Related
Aug 31, 2011
It has happened repeatedly, but on different occasions, that the close file X that should be in the top right position of the drawing has vanished. In other drawings that are open at the same time the X in present...Switching between drawings often brings the X back, but this is a weird bug that was not present before the 2012 release.
win 7 IV 2012 suite + Vault
View 7 Replies
View Related
Mar 4, 2013
I need to close drawing file which is inactive. How i can achive same.
View 3 Replies
View Related
Mar 28, 2013
After I close C3D 2012 I get this button,
Why? It doesn't seem to be affecting anything, but it's annoying.
Any way I can get rid of it?
View 9 Replies
View Related
Dec 13, 2013
Running Autocad Architecture 2014:
I am running into a problem, I like to use the annotative line type scale when I open the drawing i have to set the MSLTS to (0), and PSLTS to (0), LTS is already at (0). When I set these settings then save the drawing (saves as autocad 2013 version), close it down and re-open it the MSLTS and PSLTS settings reset back to (0). I've tried everything to get these settings to save but nothing works.
I want to keep these settings MSLTS (1), PSLTS (1), and LTS (1), after a save and re open they reset to (0)
View 2 Replies
View Related
