I have a button which has a mousover/mousout animation. When i click the button, it will shrink down to 0%. when it does, my mousout event is triggert, which i dont want.
how can i disable the mousout event after the click event?
i have a problem with an animation in Edge Animate. I try to animate a button which spins 45° on mouse over and back on mouse out. So far no problem. Now i want the button to spin 90° when i click on it and let it stay on this position. I made it spin the 90° but it always spins back on mouse out because the event is still there. Is there any possibility to delet the mouse out event or pause it after clicking on the button. I already tried remove it but without any sucess.
View 4 Replies View RelatedI'am trying to get a parallax type scroll to work.
I have my browser small enough so scroll bars are displayed. I have set the stage's overflow to "scroll". In the Stage "scroll" action I have the following: console.log("scrolled");
But it never fires when I scroll.
I've added a similar "click" action to a rectangle on the stage and that works.
When I try to add a click event on a symbol, I can't access to the symbol, only to the parent. For example, if on the event click on a specific symbol A I add the code
var symbolElement = sym.getSymbolElement();
symbolElement.hide();
It will hide the parent of A, instead of hiding A. How do I access to A?
I have a button on the main stage with a hit event inside of it. This hit area calls frame lables on other symbols (these "other symbols" are also on the main stage, not dynamic) . How do I make the click event of the hit area null if one of these symbols is/are visible? I added another button to set the visibility to false but then I also need the click event to reset itself to it's original state
View 10 Replies View RelatedIs there a way to code certain regions of an image for a click event without adding a hit area?I have a map of Texas with each region. Clicking on a region brings this region bigger to the front. Then I want a click event for each county to bring up its name and other data.
View 12 Replies View RelatedI want to have a mouseover and -out effect on my navigation bar and on the event click it should stay in the mouseover status. So far the mouseout and the click event affect each other on a wrong way. The example I attached here is done with plain rectangles, but later they will be images.
MyStatusQuo: [URL]
On the stage I have a button and a hidden symbol. The symbol has an animation within itself.When I click the button, the symbol becomes visible and plays the animation. Its all good so far.I want to be able to click the now visible symbol, the animation within itself plays in reverse and then it hides itself. How do I make it hide itself after the animation plays in reverse?
BUTTON CODE (This works for me):
sym.$("AnimationOne").show();
var AnimOne = sym.getSymbol("AnimationOne");
[code]...
If I add this, it just hides itself without animating in reverse
I'd like to delete all symbol instances on a click event, the
sym.getSymbol("SymbolDefinitionName").deleteSymbol();
only works on one symbol, and I've tried combining it with both
sym.getComposition().getSymbols("SymbolDefinitionName");
and
sym.getSymbolElement().children();
Is there any Event or ApI to get the Point3D when the mouse is moving using .net
I want to get Point3D when the mouse is moving just as CAD shown on lower left corner. Is there any way to get it with .net?
I am setting up template .ipts and .idw for my company, and i run Adept to save and store my files. Now i have a code to automatically make a .idw after i save an .ipt. but then after every save (adept saves the .ipt a lot of times) it will ask to make a drawing for the .ipt. well i was wondering if there is a code to put in a rule to disable the event triggers, and place that rule on the trigger after close document. so that the next time i open the document no event triggers will work.
View 1 Replies View RelatedI have the right click on autocad for repeat the last command.
when i launch my prog. --> the prog show a form with a datagridview. I have added a contextMenuStrip in this datagridview.
SO when i launch the prog with the right click (repeat last command) the form show and the contextmenustrip too. (if the mouse is on the datagrid.)
How i can cancel or purge the event mouse right click ?
How to set a tool tip to show up next to and follow the mouse during user interaction. It's the same function that the CommandManager.Pick does?
If it's not a built in function then I guess it's created by a tool tip that gets moved around to follow the mouse on mouse move?
I am developing a .NET application that integrates with AutoCAD Architecture. In my .NET application, I provide my user with a list of drawing files (.dwg) that they can choose to open. Once my user has selected a file, my application will open the selected drawing in AutoCAD Architecture. In this drawing, the user can click on an object in the drawing.
Can this mouse click event be captured and the object ID for the selected object be returned to my application?
I want to be able to read the left click mouse button coordination all the times . Is it possible ?
View 4 Replies View RelatedI followed the tutorial on this page: [URL]. However, my animation auto plays and mousing over has no effect. I have searched and sreached to no understandable (to me) avail. Here's a link to the file: [URL]
View 2 Replies View RelatedIn my workflow, I am constantly editing symbols. However, when I enter a symbol, the stage is "darkened". The result is that I cannot effectively gauge colors as I edit symbol elements. How can I disable this "darkening" and see the normal colors?
View 4 Replies View RelatedI'm having a problem with IF ELSE code use with a mouse click. What I want each time a user "clicks" i want to execute a particular block of code, up to 3 clicks, then nothing. I've tried local and global click counter var but can't seem to get past the first "if". This is what I have now (I'm using console.log() to keep track.
In comp ready i create a global var ...
// insert code to be run when the composition is fully loaded heresym.getComposition().getStage().setVariable('clickcnt', 1); //set counter to 1
var i = sym.getComposition().getStage().getVariable('clickcnt');
console.log ("Counter is starting at "+i);
on the stage i create a "click" event..
// insert code for mouse click herevar i = (sym.getComposition().getStage().getVariable('clickcnt'); if (i=1){ console.log("counter is = "+i); //do some code sym.getComposition().getStage().setVariable('clickcnt', 2); //set counter to 2 } else if (i=2){ console.log("counter is = "+i); //do some code sym.getComposition().getStage().setVariable('clickcnt', 3); //set counter to 3 } else if (i=3){ console.log("counter is = "+i); //do some code sym.getComposition().getStage().setVariable('clickcnt', 4); //set counter to 4 taking it out of range sym.play(100); //play the timeline animation } else { //
I'm using this to negate any further clicks. I'm sure there's a proper way to do this. I just don't know it. sym.stop(1000); console.log("end"); };I When I run this It never gets passed the first if, It's like the "clickcnt" var is not getting updated or read properly.
I have a crosshair like in a lightgun style game at an arcade. What code would I use to have the symbol follow the mouse, and if at all possible, could the symbol's origin be in the middle of the symbol and not in top left corner of the symbol?
View 15 Replies View RelatedI have this animated menu, when I click one of the buttons the animation to show some information starts, but when I move the mouse, the animation goes straight to the beginning so i can't continue intercting with it, that shouldn't happen, what do you think it is?
View 2 Replies View Relatedi need to control the timeline animation with the mouse wheel.i've tried this code but I've could only make it work with mouse move, unfortunatly the scroll does not work -
composition ready:
this.onMove=function(posX, posY){
timelinecontrol = Number(posX)*30;
console.log(timelinecontrol);
sym.stop(timelinecontrol);
[code]...
So I have an interactive piece with several shapes. There are about 5 rectangles, 3 horizontal and 2 vertical. For aesthetics and to fit them all in the space (stage), they overlap slightly. Whenever you mouseover a single rectangle it pushes the other rectangles away and a text bubble appears. When you mouseout, the text box goes away and the rectangles return to their original position. This worked without glitches when I applied it to the first rectangle. Now that I'm applying this to all of the other rectangles, I'm running into trouble. I'm thinking the trouble is with the overlapping portion. If you hover one rectangle where it overlaps another rectangle for a split second it plays the correct animation but then I think it tries to also play the animation for the other overlapping rectangle that appears underneath.
So my question is, what is the best way to remedy this problem? On mouseover can I temporaily disable mouse events for the other rectangles once one has been triggered? And then maybe re-enable them on mouseout? Is there a way for the rectangle that is visually on top to be the one that recieves the mouseover event?
I never use this for now, and I want to intercept mouse wheel movement (up or down) for to change animation panels (divs) or to make another actions.
Is not for a scroll of a large stage or div, it's only for to know when the user use the mouse wheel.
Example: [URL]....
I found a really good tutorial here for how to create childsymbols on a mouse click and it works fine - as long as you are doing it on the main stage.
Here is the code:
var circle = sym.createChildSymbol("flower", "Rectangle");
var circleElement = circle.getSymbolElement();
var posX = (e.pageX- ($(circleElement).width()/2)) + "px";
var posY = (e.pageY- ($(circleElement).height()/2)) + "px";
sym.$(circleElement).css({"position":"absolute", "top":posY, "left":posX});
I wanted to create the ChildSymbols on to a premade symbol I have called 'Rectangle'. This works as long as my symbol 'Rectangle' is the same size as the Stage or at least placed at the top left of the screen.
However if I move the symbol 'Rectangle' away from the 0,0 coordinates then the Child symbols appear offset by the distance that 'Rectangle is from the zero point.
How to keep the Child symbols where I want them to be on the Rectangle? I tried calling the childSymbol like this:
var circle = sym.createChildSymbol("flower", "Stage");
And that keeps the symbols where they should be, but for some reason it has a performance lag and also means that you can't click within the bounds of a generated childSymbol.
Everytime i open Adobe Edge Animate, it takes a good minute or too to stop the spinning ball. Then after every mouse click, it spins for another couple of minutes, and so on. I have tried creating the launchd.conf file with the proxy information, I have uninstalled and installed numerous times. I am working from CC with a Mac Book Pro Retina, 15-inch, Early 2013 OSX 10.8.5. I am having no other issues with any of my other applications and them being responsive.
View 7 Replies View RelatedI am creating a game where you have to hit objects to score points.
I would like to replace the mouse pointer with a mallet and on click it should basicly hit down and go back up.
I am trying to create an instance of a symbol at the mouse location when i click - anywhere on stage. I think it should be something like the following:
//stage on.click function
// Create an instance element of a symbol as a child of the
// given parent element
//premade code: var mySymbolObject = sym.createChildSymbol("Symbol_1", "ParentElement1");
var mySymbolObject = sym.createChildSymbol("Symbol_1", "Mouse");
This doesn't work of course because the mouse isn't a symbol.
I'm trying to make an interactive animation where when the user clicks and moves the mouse around an area, the opacity of that part of the layer decreases and the user gets to see the background layer. It's similar to the idea of using a brush to clean a dirty window.
View 6 Replies View RelatedI have a list of menu items. I want them to change color when the user rolls over any of the six menu items. I want to write a function so it would be
var = menuTarget; (this is the item the user is currently mouseovering how do I define this?)
menuTarget.mouseover(function(){
$(this).css("color","red");
})
menuTarget.mouseout(function(){
$(this).css("color","green");
})
How to do image moving based on mouse movement in adobe edge animate 1.0?Just like drag and drop option in flash
View 3 Replies View RelatedI modify the properties of a slice, it triggers a dialog box that i have made myself.In order to make that, I have to know how to capture this event. For the design of the dialog box, there isn't problems ..i know how to do that but not how to capture this event.I have already analyze the Getter plugin and his "getter.log" but i don't understand how it works. Listener is more easy to understand.
View 1 Replies View Related