AutoCAD Inventor :: Get Rid Of Yellow Dot Behind Cursor In Sketch Mode?
Nov 20, 2013How do I get rid of the yellow dot behind the cursor in sketch mode?
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Line Snap - Cursor Turns From Yellow To Green
Apr 19, 2011I'm not sure what i changed but when im trying to sketch a line usually the little cursor turns from yellow to green when it snaps to an edge or a center. but its not snapping, how to get my line snap back.
View 8 Replies View RelatedAutoCAD Inventor :: Remove Yellow Sketch Line When Inserting An Image
Feb 12, 2012I have a basic problem but I can't seem to be able to get around it. I added an image to a sketch successfully but it cam with a yellow line around it (see attached) and I can't remove it. In the sketch properties I was able to change it's color to black to make less visible but it's still there.
Any clue as to how I can make it disappear ?
AutoCAD Inventor :: Rotate All When Not In Sketch Mode?
Nov 21, 2011Likely a simple question; I have completed a part and because I am new, drew it a certain way to make my life easier. Now that the part is complete I would like to rotate the entire part (but not create a new solid) by 45 deg.
Inventor 2014 PDS
AutoCAD Inventor :: Get Rid Of Button In Sketch Mode?
Jan 11, 2014Is it possible to disable that green "Finish sketch" and Ok button when your in sketch mode drawing with a Spline?
View 4 Replies View RelatedAutoCAD Inventor :: Saving In Sketch Mode?
Jan 27, 2012Autodesk for Inventor 2013, the ability to save while in sketch mode - if you're going to be spending a lot of design time sketching then this needs to be addressed so that the drawing is automatically saved. Otherwise if Inventor crashes (which it often does) while you're busy sketching away you loose your work.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Inventor :: Centerline Bisector In Sketch Mode?
Dec 28, 2012Is it possible to use the ""Centerline Bisector" command in the sketch enviroment. I want to add a centerline of a hole on a sketch on my part, but I only want to select two lines and have the centerline generated.
View 3 Replies View RelatedAutoCAD Inventor :: Red Lines Is Part Sketch Mode?
Dec 12, 2002I know about the pink lines, green lines, and black line, but I recieved a part from another person and it had red lines for the sketch, how, what did he do to get those? He doesn't know how he did it.
View 8 Replies View RelatedAutoCAD Inventor :: Sketch Mode - Dimension From Quad
Jun 17, 2013How does one (in sketch mode) dimension from the quad of a circle instead of the center? Been dealing with it for a long time, no I am fed up and want to dimension from the quad.
View 6 Replies View RelatedAutoCAD Inventor :: Turned Off Snap To End Point In Sketch Mode?
Oct 19, 2011Inventor 2010
Some how I turned off the snap to end point in the sketch mode. where is the dialog box to control snap settings
AutoCAD Inventor :: Create Reference Dimensions In Sketch Mode?
Sep 9, 2003In 5.3 I can create reference dimensions in sketch mode to my hearts content. They became very valuable as I would use them to determine placement of multiple features. Now, in IV 7, I have alot of trouble creating reference dimensions from adjacent features on the same surface. I have to change the way I'm working now and it has stumped me on a few occasions. is there a "new" feature I need to enable or is this the cost of progress?
View 9 Replies View RelatedAutoCAD Inventor :: Use Drive Constraint In Sketch Mode For Blocks
Oct 25, 2012I wonder if one can use drive constraint in sketch mode for blocks as I like to visualise how the links move when one dimension changes.
View 4 Replies View RelatedAutoCAD Inventor :: Fillets Not Working On Lines In Sketch Mode
Jul 10, 2013I am using Inventor 2012 and have recently experienced a problem with the fillet not working correctly. I have a curve and a straight line that connect and when I select fillet it will allow me to select the curve but not the straight line. I have been able to do this in the past with no problems.
View 4 Replies View RelatedAutoCAD Inventor :: Change The Dimension Size In Sketch Mode?
Apr 8, 2011How do I change the dimension size in sketch mode?
View 4 Replies View RelatedAutoCAD Inventor :: Isometric View When Exiting Sketch Mode
Aug 29, 2011Sometimes when I'm exiting from a sketch, the entire model goes back to isometric view. Is there a way to STOP this from happening?
View 9 Replies View RelatedAutoCAD Inventor :: Corner Snaps In Sketch Mode Will Turn Off?
Mar 8, 2012Sometimes corner snaps in sketch mode will turn off. why does this happen and how do I fix it?
View 1 Replies View RelatedAutoCAD Inventor :: Increasing Size Of Triad In 3D Sketch Mode
Oct 26, 2011I'd like to be able to vastly increase the size of the triad in the 3D Sketch environment - when sketching the triad is tiny and does not increase in size when zooming, this makes snapping to its planes extremely difficult.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Inventor :: 2011 - Increase Text Size In Sketch Mode?
Oct 27, 2011How do I increase the size of the text of dimensions in sketch mode.
View 4 Replies View RelatedAutoCAD Inventor :: Text Tool In Sketch Mode Use Part Parameters
May 11, 2004Wouldn't be nice if you could use part parameters (description, part number, etc...) in the sketch mode text tool?
I'd like to emboss the actual part number on a part without having to retype the part number in manually.
AutoCAD Inventor :: Hide Dimensions In Sketch Mode In Drawing Environment
Sep 28, 2012I was giving a hand drawn wiring diagram (original.jpg) and it is a rats nest!!
I was asked to re-draw this and put it on our drawing template.
I have the plugs and terminal blocks drawn up and now I am about to attempt to add in the wires, but the sketch is so filled with dimension lines and values, it is going to be a task to try and make sure every line I draw is correct. This would be much easier to do if the dimensions could be turned off as the wires I am drawing will not be constrained.
I don't think there is layers options inside a sketch mode, or a if i start a new sketch I don't think I can project that sketch to the new one?
The only other options I can think of was to delete all dimensions and apply FIX constraint to everything! or
I guess I could have modeled the plugs and blocks in position and added them to the drawing, projected the geometry to a new sketch and added in my wires??
There must be someway to toggle the dimensions??
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
AutoCAD Inventor :: Missing Equal Length Constraints When In 3D Sketch Mode?
Aug 1, 2013I use 3D sketching frequently as a means to generate frames with the frame generator.
I notice that the constrain group no longer contains an equal length tool, as in a simple 2D sketch. This is where i would generally select two lines, and constrain them to be equal in length.
Is there a reason for this omission? Should I be worried that my menus are not showing the full options for constraints?
AutoCAD Inventor :: 2013 Crashes When Clicking Draw Operation In Sketch Mode
Sep 4, 2012I opened Inventor 2013 this morning to find this issue. Everything starts fine, I am able to open/create a part file and enter sketch mode, but as soon as I click a draw operation (spline, line, rectangle, etc.) it freezes on me. I have been using 2013 for a couple months now without issue, and cannot associate this with a change of anything on my computer.I have tried:
1) Restarting computer
2) Reducing graphics display quality to Rough
3) Checking "Software Graphics"
4) Calibrate my 3Dconnexion mouse
5) The diagnostic check for graphics card (approved)
AutoCAD Inventor :: Sketch Mode Snaps To Grid But Snap And Grid Are Both Switched Off?
Jul 23, 2012I have a user and when he's in sketch mode he trys to draw a line but it keeps on snapping to a grid. Both snap and grid setting are switched off. I can't find any settings he has different from my own set-up so I'm finding it hard to fox this problem. FYI, this user is a bit of a problem and tends to change settings without even realising he's doing it.
He's using Inventor 2012.
AutoCAD Civil 3D :: Snap Mode Slow Down Movement Of Cursor
Apr 5, 2013Using an old version of autocad 2012 in my laptop as backup loaded on Window 7. Everytime I used the snap mode it slow the movement of my cursor to move to specific location, but no problem using the Window XP.
View 3 Replies View RelatedAutoCAD Inventor :: Shared Sketch Generates Sketch Doctor Error - Feature Suppressed
Sep 21, 2011I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies View RelatedAutoCAD Inventor :: Copy Part Sketch Into Drawing Sketch
Sep 20, 2012How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
AutoCAD Inventor :: How To Get Sketch Point Data From Sketch Entity
Dec 3, 2013I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
AutoCAD Inventor :: Converting 3D Sketch To 2D Sketch From IGS File Using Wires?
Aug 1, 2011First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
AutoCAD Inventor :: Change Sketch 2013 Into Sketch Of 2010?
Dec 14, 2012want to change sketch 2013 into the sketch of 2010
View 1 Replies View RelatedPhotoshop :: Cursor Always Remains In The Hand Mode
Dec 24, 2008my cursor always remains in the "hand" - mode, so I can't use any tools anymore.
View 2 Replies View RelatedAutoCAD Inventor :: Sketch Disappears When Editing Another Sketch?
May 30, 2013When I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
