AutoCAD Inventor :: Use Drive Constraint In Sketch Mode For Blocks
Oct 25, 2012I wonder if one can use drive constraint in sketch mode for blocks as I like to visualise how the links move when one dimension changes.
View 4 Replies
ADVERTISEMENT
AutoCAD Inventor :: Angle Constraint / Drive Constraint
Jul 30, 2012I am designing a vertical axis wind turbine just for some practice (just started using Inventor) and everything was going smoothly until I tried to "animate" it spinning. First, I set up a work plane that goes through the center of the structure, and then I clicked angle constraint "explicit reference vector." After watching several youtube videos, I figured that I should click on the work plane, click on another reference point, and then click another point that would be orthogonal to those two (right?). Well after I choose the first point, Inventor will only allow me to choose the center axis as the second option (which I think should be the third option).
View 6 Replies View RelatedAutoCAD Inventor :: Can't Select Sketch Constraint
Oct 12, 2011 I can't seem to get inventor to select a given parameter inside a sketch. It keeps giving me an error.
All I want to do is to have inventor Select / Highlight a parameter inside of a sketch so the user can clearly see it in the window. Ive tried heaps of different selection options, I just can't work out what ive done wrong.
Sub GetParameter()Dim TargetName As StringDim oCompDef As PartComponentDefinitionDim oSketch As PlanarSketchDim oConstr As DimensionConstraintDim oParam As ParameterDim oCmdMgr As CommandManagerTargetName = d0 ' parameter nameSet oCmdMgr = ThisApplication.CommandManagerSet oCompDef = ThisApplication.ActiveDocument.ComponentDefinitionFor Each oSketch In oCompDef.Sketches For Each oConstr In oSketch.DimensionConstraints If oConstr.Parameter.Name = TargetName Then Set oParam = oConstr.Parameter oSketch.Edit Call oCmdMgr.DoSelect(oParam) Exit Sub End If NextNextEnd Sub
AutoCAD Inventor :: Drive Constraint In 2013
Jul 30, 2012See attached screen shot.
To activate the new position of the assembly of approx 5k instances takes about 5 minutes in IV 2013 when using Drive constraint. The larger the assembly the longer it takes
In IV2011 takes about 10 seconds. I've never seen the "Not responding" sign in Drive constraint window in previous versions. I'm just wondering how can avoid this "New feature" of 2013.
AutoCAD Inventor :: Create Macro To Get Constraint Rec Block In Sketch
Jan 16, 2013I am using inv2011. I have to create rec. blocks very often and in inv2011 . I have to constraint it in middle.
Can i write a Macto that gives me constraint rec block in sketch. This feature already available in Inv12.
AutoCAD Inventor :: Drive Constraint (See Scissor Jack In Motion)
Feb 24, 2012I have a Scissor Jack Assembly in its open Position. (fully constrained)
I would like to be able to use Drive constraint & show the Assembly in its closed position.
I know I need to adjust one or two of my constraints.
AutoCAD Inventor :: Recording A Drive Constraint Animation In Assembly
Jun 17, 2011When I record an animation in .avi using the Drive Constraint command here's what pops :
-The codec you selected to compress this AVI video stream cannot handle the current screen color depth and/or the graphics frame size. Please try another codec.
-Then I press OK and it records but the AVI file is empty and no video is watchable.
What can I do?
I'm using Autodesk Inventor 2012 ans a windows 7 64bit brand new computer with Nvidia graphic card.
AutoCAD Inventor :: Turn Crank And Screw Rod At Same As Drive Constraint
Apr 6, 2012I am using these set limits within a drive constraint so
to show the Jack opening & closing.
Although it can now open & close with ease,
how I can make the crank turn with the screw rod at the same time as the scissor car jack opens & closes.
AutoCAD Inventor :: Miniature Train Project - How To Create Drive / Motion Constraint
Mar 2, 2011Im working on a miniature train project of PLTW... I have completed the train and made a track for it... but i can't figure out how to create a drive/motion constraint that would make it go along the track.
(All the files are in a zip folder that is attached)
PS... if you go to this youtube video you can see what im trying to do: [URL].......
AutoCAD Inventor :: Rotate All When Not In Sketch Mode?
Nov 21, 2011Likely a simple question; I have completed a part and because I am new, drew it a certain way to make my life easier. Now that the part is complete I would like to rotate the entire part (but not create a new solid) by 45 deg.
Inventor 2014 PDS
AutoCAD Inventor :: Get Rid Of Button In Sketch Mode?
Jan 11, 2014Is it possible to disable that green "Finish sketch" and Ok button when your in sketch mode drawing with a Spline?
View 4 Replies View RelatedAutoCAD Inventor :: Saving In Sketch Mode?
Jan 27, 2012Autodesk for Inventor 2013, the ability to save while in sketch mode - if you're going to be spending a lot of design time sketching then this needs to be addressed so that the drawing is automatically saved. Otherwise if Inventor crashes (which it often does) while you're busy sketching away you loose your work.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Inventor :: Get Rid Of Yellow Dot Behind Cursor In Sketch Mode?
Nov 20, 2013How do I get rid of the yellow dot behind the cursor in sketch mode?
View 2 Replies View RelatedAutoCAD Inventor :: Centerline Bisector In Sketch Mode?
Dec 28, 2012Is it possible to use the ""Centerline Bisector" command in the sketch enviroment. I want to add a centerline of a hole on a sketch on my part, but I only want to select two lines and have the centerline generated.
View 3 Replies View RelatedAutoCAD Inventor :: Red Lines Is Part Sketch Mode?
Dec 12, 2002I know about the pink lines, green lines, and black line, but I recieved a part from another person and it had red lines for the sketch, how, what did he do to get those? He doesn't know how he did it.
View 8 Replies View RelatedAutoCAD Inventor :: Sketch Mode - Dimension From Quad
Jun 17, 2013How does one (in sketch mode) dimension from the quad of a circle instead of the center? Been dealing with it for a long time, no I am fed up and want to dimension from the quad.
View 6 Replies View RelatedAutoCAD Inventor :: Turned Off Snap To End Point In Sketch Mode?
Oct 19, 2011Inventor 2010
Some how I turned off the snap to end point in the sketch mode. where is the dialog box to control snap settings
AutoCAD Inventor :: Create Reference Dimensions In Sketch Mode?
Sep 9, 2003In 5.3 I can create reference dimensions in sketch mode to my hearts content. They became very valuable as I would use them to determine placement of multiple features. Now, in IV 7, I have alot of trouble creating reference dimensions from adjacent features on the same surface. I have to change the way I'm working now and it has stumped me on a few occasions. is there a "new" feature I need to enable or is this the cost of progress?
View 9 Replies View RelatedAutoCAD Inventor :: Fillets Not Working On Lines In Sketch Mode
Jul 10, 2013I am using Inventor 2012 and have recently experienced a problem with the fillet not working correctly. I have a curve and a straight line that connect and when I select fillet it will allow me to select the curve but not the straight line. I have been able to do this in the past with no problems.
View 4 Replies View RelatedAutoCAD Inventor :: Change The Dimension Size In Sketch Mode?
Apr 8, 2011How do I change the dimension size in sketch mode?
View 4 Replies View RelatedAutoCAD Inventor :: Isometric View When Exiting Sketch Mode
Aug 29, 2011Sometimes when I'm exiting from a sketch, the entire model goes back to isometric view. Is there a way to STOP this from happening?
View 9 Replies View RelatedAutoCAD Inventor :: Corner Snaps In Sketch Mode Will Turn Off?
Mar 8, 2012Sometimes corner snaps in sketch mode will turn off. why does this happen and how do I fix it?
View 1 Replies View RelatedAutoCAD Inventor :: Increasing Size Of Triad In 3D Sketch Mode
Oct 26, 2011I'd like to be able to vastly increase the size of the triad in the 3D Sketch environment - when sketching the triad is tiny and does not increase in size when zooming, this makes snapping to its planes extremely difficult.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Inventor :: 2011 - Increase Text Size In Sketch Mode?
Oct 27, 2011How do I increase the size of the text of dimensions in sketch mode.
View 4 Replies View RelatedAutoCAD Inventor :: Text Tool In Sketch Mode Use Part Parameters
May 11, 2004Wouldn't be nice if you could use part parameters (description, part number, etc...) in the sketch mode text tool?
I'd like to emboss the actual part number on a part without having to retype the part number in manually.
AutoCAD Inventor :: Hide Dimensions In Sketch Mode In Drawing Environment
Sep 28, 2012I was giving a hand drawn wiring diagram (original.jpg) and it is a rats nest!!
I was asked to re-draw this and put it on our drawing template.
I have the plugs and terminal blocks drawn up and now I am about to attempt to add in the wires, but the sketch is so filled with dimension lines and values, it is going to be a task to try and make sure every line I draw is correct. This would be much easier to do if the dimensions could be turned off as the wires I am drawing will not be constrained.
I don't think there is layers options inside a sketch mode, or a if i start a new sketch I don't think I can project that sketch to the new one?
The only other options I can think of was to delete all dimensions and apply FIX constraint to everything! or
I guess I could have modeled the plugs and blocks in position and added them to the drawing, projected the geometry to a new sketch and added in my wires??
There must be someway to toggle the dimensions??
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
AutoCAD Inventor :: Missing Equal Length Constraints When In 3D Sketch Mode?
Aug 1, 2013I use 3D sketching frequently as a means to generate frames with the frame generator.
I notice that the constrain group no longer contains an equal length tool, as in a simple 2D sketch. This is where i would generally select two lines, and constrain them to be equal in length.
Is there a reason for this omission? Should I be worried that my menus are not showing the full options for constraints?
AutoCAD Inventor :: IMates In Sketch Blocks
Jun 29, 2010Is there an option to add an i mate within a sketch block. I am working on a belt conveyor for handling coal and have created a master sketch to drive all components for along the conveyor.
As the ground modules are all the same module, i have a sketch block. Problem is i cannot add an i mate to the idlers within the sketch block. It means i can only create to i mates individually after the sketch block is copied or patterned.
AutoCAD Inventor :: 2013 Crashes When Clicking Draw Operation In Sketch Mode
Sep 4, 2012I opened Inventor 2013 this morning to find this issue. Everything starts fine, I am able to open/create a part file and enter sketch mode, but as soon as I click a draw operation (spline, line, rectangle, etc.) it freezes on me. I have been using 2013 for a couple months now without issue, and cannot associate this with a change of anything on my computer.I have tried:
1) Restarting computer
2) Reducing graphics display quality to Rough
3) Checking "Software Graphics"
4) Calibrate my 3Dconnexion mouse
5) The diagnostic check for graphics card (approved)
AutoCAD Inventor :: Automated Create Sketch Blocks?
Jan 23, 2013creating a named sketch block (in an ipt) containing entities that I have created in the same sub? I'm doing this from Excel, in Inventor 2010.
What I have:
Function CreateUncutTagSketchBlock()Dim IVApp As Inventor.ApplicationDim oDoc As DocumentDim oCompDef As ComponentDefinitionDim oSketch As SketchDim oTG As TransientGeometryDim FileName As StringDim Coords(1 To 10) As Point2dDim oSketchCircle As Circle2dDim oSketchArcs(1 To 2)
[code]....
note that i've also taken a shortcut with the arcs, and the circle. I did try to create them using the same naming convention as the lines, but... I failed to implement it successfully.Also, I can not quite figure out how to constrain all the start/end points together.
AutoCAD Inventor :: Sketch Blocks In Assembly Files
May 29, 2013Is there any way to add sketch blocks to an assembly sketch?
View 9 Replies View Related