Wouldn't be nice if you could use part parameters (description, part number, etc...) in the sketch mode text tool?
I'd like to emboss the actual part number on a part without having to retype the part number in manually.
I know about the pink lines, green lines, and black line, but I recieved a part from another person and it had red lines for the sketch, how, what did he do to get those? He doesn't know how he did it.
View 8 Replies View RelatedI have several name plates which are embossed, and only the description changes from job to job, but find it a nuisance having to go into the part,edit sketch then edit text! each time I want to change the description .
I was initially going to get round this by creating a form and linking it to the text parameter! But for some reason it won't take in the text parameter I created and will only find and take in numerical parameters?
Is there any way around this? I know it is possible in inventor 2013. I am currently working with Inventor professional 2012.
How do I increase the size of the text of dimensions in sketch mode.
View 4 Replies View RelatedWhen I add a text to a sketch, I can constrain the rectangle to set its size, orientation and position.And I can set the text width to fit into the rectangle. But I wasn't able to set the text height to fit into the rectangle.
Am I missing something or is the fit text option doing only half the job?
I’m trying to get the embossed text on a nameplate (done in sketch on a part) to change with updating a custom property in iProperties. Right now I’m using iLogic so I can change the text in User Parameters and that updates the embossed text. So where I’m having an issue is the Export Parameters tab is grayed out so I can’t get it work with my custom properties.
View 1 Replies View RelatedThis code works with no errors but does not change the text size. A user can over ride the text size (Font size) so I'm hoping it is possible thru code.
Dim oSketch As Inventor.Sketch
Set oSketch = oPartDoc.ComponentDefinition.Sketches("Sketch1")
Dim oText As Inventor.TextBox
Set oText = oSketch.TextBoxes.AddByRectangle(pnt1, pnt2)
oText.Style.FontSize = 0.1
How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
We are trying to add reference lines to the idw drawing for a sub-assembly. These lines represent centerlines of parts of the main assembly. The main assembly is not the reference file for the drawing. However, the required dimension setting the centerlines is a User Parameter in the sub-assembly. (The centerlines are represented by work planes in the sub-assembly file). Using iLogic, we were able to populate the User Parameter from the sub-assembly into the idw file. We can see it as a User Parameter in the idw file. However, when we go into sketch mode the User Parameter is not an option. In sketch mode, we pull a dimension between the two centerlines (d4). When you look at the parameters d4 does not exist so we cannot set d4 equal to our User Parameter (and we've looked there are no filters on). We need this dimension to be able to adjust as the length of the sub-assembly adjusts for different cases. Each case is unique and done on a job by job basis.
There are several places in our drawings where being able to place reference lines and set their relationship to the part would be very useful.
1. Why are the User Parameters not available for use in sketch mode on a drawing?
2. Why can the dimension IDs (ex. d4) not be seen by looking at the parameters?
3. alternative way of putting reference lines on a drawing?
Switched to the flat pattern of my sheetmetal part and created a sketch.
My intention is/was to control the values of the sketch parameter values using ilogic.
I cannot access these parameters through the ilogic parameter interface or the ilogic rule editor.
I am using ilogic with Inventor 2009 / Inventor 2010 Certified Professional
I want to reset the number for the sketches, extrusions, etc. in the browser tree of my template file to start with 01 instead of sketch48 and extrusion69.
I also want to reset the model parameters to start with d0 instead of d485.
The attached image show an example of a simple cylinder that I created from my .ipt template file.
Likely a simple question; I have completed a part and because I am new, drew it a certain way to make my life easier. Now that the part is complete I would like to rotate the entire part (but not create a new solid) by 45 deg.
Inventor 2014 PDS
Is it possible to disable that green "Finish sketch" and Ok button when your in sketch mode drawing with a Spline?
View 4 Replies View RelatedAutodesk for Inventor 2013, the ability to save while in sketch mode - if you're going to be spending a lot of design time sketching then this needs to be addressed so that the drawing is automatically saved. Otherwise if Inventor crashes (which it often does) while you're busy sketching away you loose your work.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I need to use parameters of a part in an assembly. How to do this? Do i need to define a rule? How is this done?
Can i do it without using an Excel sheet as a parameter source for both the assembly and the part? The target is to have inventor update an array of assets as soon as the width of a part is changed whether in Excel or in the Factory properties of the asset.
I'm new to Inventor. Lets say I create a part called Pipe.ipt. In it I specify the OD, Thk and Length of the pipe. If I then create an Assembly, and I want to use multiple instances of Pipe.ipt, but each instance has a different set of parameters (i.e. different OD, Thk and Length). How do I do this?
I see I can set up iPart, and I could set up tables with the OD and Thickness for various standard pipe sizes. But this doesn't address the length. How do I re-use the same Part in an assembly, but each part has it's own set of unique paramenters?
I have a part made where various parameters in it.
Now I place the part in a assy and from there i want the parameters to control the part.
I do this now by the same parameters from the part to add in the assy by typing the parameters manually in the assy.
Is there a way that you can define parameters retrieved from the part about the assy without retyping and therefore can make mistakes?
How do I get rid of the yellow dot behind the cursor in sketch mode?
View 2 Replies View RelatedIs it possible to use the ""Centerline Bisector" command in the sketch enviroment. I want to add a centerline of a hole on a sketch on my part, but I only want to select two lines and have the centerline generated.
View 3 Replies View RelatedHow does one (in sketch mode) dimension from the quad of a circle instead of the center? Been dealing with it for a long time, no I am fed up and want to dimension from the quad.
View 6 Replies View RelatedHow we can access the part parameters after hitting create iAssembly. do I need to make i parts first and then bring them to an assembly and make an iAssembly??
View 5 Replies View RelatedI have design tree like this:
Main Assembly
L Sub Assembly1
L Sub Assembly 2
L Sub Assembly 3
L part 1
in part i have a parameter name ("Panjang")... how to control "Panjang"?. I cannot access a part parameter in Sub-assembly.
[URL]
I am trying to control the parameters contained in a part that is not in my assembly. May sound odd, but I am using the multi body part modeling feature to create all of my bodies in a single part file, then making these components/sub assemblies, and pulling them into my assembly. However, I do not want to have the "control part" in my assembly, I just want it to drive the parts. I cannot figure out how to access these parameters without having the part included in the assembly...
View 7 Replies View RelatedI have the following problem. I design a simple part - an extruded base, so i have a parameter in this part that i can control the extrusion distance - i call this parameter D.
Then i create an assembly and place the part in it. How can i access the parameter D of the part from within the assembly?
I want to place multiple instances of this part in my assembly and control each parameter D of an instance using an excel worksheet that is linked with the assembly. How can i do it ?
My aim is to design a very simple manipulator. Each link has the same shape but a different length. I want to control each length from an excel worksheet and not from an ipart table. I want to have only one worksheet that controls the parameters of my assembly such as constraint angles , and link lengths.
I have a configurator assembly, which is controlled with an iLogic rule.
one of the parts is being changed in a lot of ways according to the different configurations. But in one of the Configurations the part must be suppressed, which works fine, however next time i run the rule i get an error message from all the other instances where it would change a parameter if the part was active.
I have tried adding if [the configuration that makes the part suppressed] = False then, in the beginning of the the code that fails, to simply prevent it from running, but it still makes an error.
and as you can see i have a lot of lines where the part normally would be configurated.
Error on Line 628 : Method arguments must be enclosed in parentheses.
Error on Line 629 : Method arguments must be enclosed in parentheses.
Error on Line 633 : Method arguments must be enclosed in parentheses.
Error on Line 634 : Method arguments must be enclosed in parentheses.
[code]........
I don't understand how to enclose the argument in parentheses.
In the recent past I've been putting textboxes (General Notes) on drawings, and using part-parameters in these textboxes to display the values stored in these parameters (see attached picture). Is there a way to automatically put a link to these parameters into the notes through the API / VBA so that these values update when the part changes? With the property obj_GeneralNote.Text it's only possible to add plain text.
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
I have 2 parameters in a part (a spring), "diameter" and "Length".
I change these parameters with iLogic to build several springs.
Is it possible to update the "Part Number" Each time I change the parameters "diameter" and "length"?
I want to get the following:
Mola_Ø-65_L-140
Where 65 is the parameter value and 140 is the length value.
I tried with the code below,
iProperties.Value ("Project", "Part Number") = "Spring_Ø-" Diameter "_L-" Length
but that returns: End of statement expected.
Autodesk Factory Design Suite Ultimate 2014
Autodesk Simulation Mechanical
Autodesk Simulation CFD
Windows 7
I created a basic part using Inventor and some how something created some parameters out of the blue. I know that I didn't create the parameters. The parameters got created automatically some how and I would like to know how this happened so I can do it again, because it would save a lot of time.
Here are some of the parameters that got created.
vParam_Title
vParam_Project
vParam_Description
I have included the file that this issue occurs in.
Inventor 2010
Some how I turned off the snap to end point in the sketch mode. where is the dialog box to control snap settings
In 5.3 I can create reference dimensions in sketch mode to my hearts content. They became very valuable as I would use them to determine placement of multiple features. Now, in IV 7, I have alot of trouble creating reference dimensions from adjacent features on the same surface. I have to change the way I'm working now and it has stumped me on a few occasions. is there a "new" feature I need to enable or is this the cost of progress?
View 9 Replies View Related
