AutoCAD Inventor :: Isometric View When Exiting Sketch Mode
Aug 29, 2011Sometimes when I'm exiting from a sketch, the entire model goes back to isometric view. Is there a way to STOP this from happening?
View 9 Replies
ADVERTISEMENT
AutoCAD Inventor :: Create An Isometric Text In Isometric View
Jan 13, 2010I wanted to create an isometric text in isometric view to indicate different names in different part.
Attached is the picture for reference.I did it using dimension, check the "hide dimension" option.But i can't hide the extension line.
how to create an isometric text?
AutoCAD Inventor :: How To Pass Break From Sectioned View To Separate Isometric View
Jun 27, 2012I started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
AutoCAD Inventor :: Create Detail View Of Isometric View In IDW?
Oct 3, 2013Sometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
View 5 Replies View RelatedAutoCAD Inventor :: How To Make Section View As Isometric View
Oct 29, 2013I have a long shaft with parts mounted on. i want to section it and show the parts. i don't need to show the whole length of the shaft.
I know i can crop the isometric view, but this way i will not see the key hole which is on the other side, it's hidden.
If i make a section it 's in an orthogonal view only.
I want to make the section view, but later to transform the sectioned view to an isometry. is it possible?
AutoCAD Inventor :: How To Turn Off Automatic Isometric View
Mar 19, 2012Is there a way to turn off automatic isometric view when returning to the model from a sketch view (in 2012)?
View 5 Replies View RelatedAutoCAD Inventor :: Isometric View From Piping Model?
Apr 1, 2010Is it possible to creat Single Line Isometric from the Piping Model?
View 4 Replies View RelatedAutoCAD Inventor :: Assembly Current View - Isometric Or Not
Feb 14, 2013Is it possible to know if the assembly view is isometric view or not.I need to perform check to get this value.
View 9 Replies View RelatedAutoCAD Inventor :: Can't Change Scale Of Isometric View
Feb 18, 2013I use: oView.scale=oView.scale/2 to half each view scale. It works for base view, projected views like bottom view and left view, but it doesn't work for Isometric view. Which property should I use for Isometric view?
View 6 Replies View RelatedAutoCAD Inventor :: Dimensioning Isometric View (text Orientation)
Aug 3, 2012I'm wondering is it possible to orientate the dimension text alligned to paper(2.jpg) but not the UCS of Isometric drawing(1.jpg).
Sometime I need to allocate my drawing with dimensioning in isometric view because its more easy to read.
I'm placing my drawing in *.idw.
AutoCAD Inventor :: Dimension Shaft In Isometric View With Various Diameters
Apr 9, 2012Trying to dimension a shaft in isometric view with various diameters. I am unable to find or select the centerpoints at the ends of the shaft. This causes dimensions to be crooked. How can i get the centerpoints to display so that they may be selected?
View 9 Replies View RelatedAutoCAD Inventor :: Rotate All When Not In Sketch Mode?
Nov 21, 2011Likely a simple question; I have completed a part and because I am new, drew it a certain way to make my life easier. Now that the part is complete I would like to rotate the entire part (but not create a new solid) by 45 deg.
Inventor 2014 PDS
AutoCAD Inventor :: Get Rid Of Button In Sketch Mode?
Jan 11, 2014Is it possible to disable that green "Finish sketch" and Ok button when your in sketch mode drawing with a Spline?
View 4 Replies View RelatedAutoCAD Inventor :: Saving In Sketch Mode?
Jan 27, 2012Autodesk for Inventor 2013, the ability to save while in sketch mode - if you're going to be spending a lot of design time sketching then this needs to be addressed so that the drawing is automatically saved. Otherwise if Inventor crashes (which it often does) while you're busy sketching away you loose your work.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Inventor :: Get Rid Of Yellow Dot Behind Cursor In Sketch Mode?
Nov 20, 2013How do I get rid of the yellow dot behind the cursor in sketch mode?
View 2 Replies View RelatedAutoCAD Inventor :: Centerline Bisector In Sketch Mode?
Dec 28, 2012Is it possible to use the ""Centerline Bisector" command in the sketch enviroment. I want to add a centerline of a hole on a sketch on my part, but I only want to select two lines and have the centerline generated.
View 3 Replies View RelatedAutoCAD Inventor :: Red Lines Is Part Sketch Mode?
Dec 12, 2002I know about the pink lines, green lines, and black line, but I recieved a part from another person and it had red lines for the sketch, how, what did he do to get those? He doesn't know how he did it.
View 8 Replies View RelatedAutoCAD Inventor :: Sketch Mode - Dimension From Quad
Jun 17, 2013How does one (in sketch mode) dimension from the quad of a circle instead of the center? Been dealing with it for a long time, no I am fed up and want to dimension from the quad.
View 6 Replies View Related3ds Max :: 2014 - Exiting Isolate Mode?
Jul 4, 2013Exiting isolate mode with alt+q still doesn´t work on 2014sp1, have to press the bulb icon.....
View 9 Replies View RelatedAutoCAD Inventor :: Turned Off Snap To End Point In Sketch Mode?
Oct 19, 2011Inventor 2010
Some how I turned off the snap to end point in the sketch mode. where is the dialog box to control snap settings
AutoCAD Inventor :: Create Reference Dimensions In Sketch Mode?
Sep 9, 2003In 5.3 I can create reference dimensions in sketch mode to my hearts content. They became very valuable as I would use them to determine placement of multiple features. Now, in IV 7, I have alot of trouble creating reference dimensions from adjacent features on the same surface. I have to change the way I'm working now and it has stumped me on a few occasions. is there a "new" feature I need to enable or is this the cost of progress?
View 9 Replies View RelatedAutoCAD Inventor :: Use Drive Constraint In Sketch Mode For Blocks
Oct 25, 2012I wonder if one can use drive constraint in sketch mode for blocks as I like to visualise how the links move when one dimension changes.
View 4 Replies View RelatedAutoCAD Inventor :: Fillets Not Working On Lines In Sketch Mode
Jul 10, 2013I am using Inventor 2012 and have recently experienced a problem with the fillet not working correctly. I have a curve and a straight line that connect and when I select fillet it will allow me to select the curve but not the straight line. I have been able to do this in the past with no problems.
View 4 Replies View RelatedAutoCAD Inventor :: Change The Dimension Size In Sketch Mode?
Apr 8, 2011How do I change the dimension size in sketch mode?
View 4 Replies View RelatedAutoCAD Inventor :: Corner Snaps In Sketch Mode Will Turn Off?
Mar 8, 2012Sometimes corner snaps in sketch mode will turn off. why does this happen and how do I fix it?
View 1 Replies View RelatedAutoCAD Inventor :: Increasing Size Of Triad In 3D Sketch Mode
Oct 26, 2011I'd like to be able to vastly increase the size of the triad in the 3D Sketch environment - when sketching the triad is tiny and does not increase in size when zooming, this makes snapping to its planes extremely difficult.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Inventor :: 2011 - Increase Text Size In Sketch Mode?
Oct 27, 2011How do I increase the size of the text of dimensions in sketch mode.
View 4 Replies View RelatedAutoCAD Inventor :: Text Tool In Sketch Mode Use Part Parameters
May 11, 2004Wouldn't be nice if you could use part parameters (description, part number, etc...) in the sketch mode text tool?
I'd like to emboss the actual part number on a part without having to retype the part number in manually.
AutoCAD Inventor :: Hide Dimensions In Sketch Mode In Drawing Environment
Sep 28, 2012I was giving a hand drawn wiring diagram (original.jpg) and it is a rats nest!!
I was asked to re-draw this and put it on our drawing template.
I have the plugs and terminal blocks drawn up and now I am about to attempt to add in the wires, but the sketch is so filled with dimension lines and values, it is going to be a task to try and make sure every line I draw is correct. This would be much easier to do if the dimensions could be turned off as the wires I am drawing will not be constrained.
I don't think there is layers options inside a sketch mode, or a if i start a new sketch I don't think I can project that sketch to the new one?
The only other options I can think of was to delete all dimensions and apply FIX constraint to everything! or
I guess I could have modeled the plugs and blocks in position and added them to the drawing, projected the geometry to a new sketch and added in my wires??
There must be someway to toggle the dimensions??
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
AutoCAD Inventor :: Missing Equal Length Constraints When In 3D Sketch Mode?
Aug 1, 2013I use 3D sketching frequently as a means to generate frames with the frame generator.
I notice that the constrain group no longer contains an equal length tool, as in a simple 2D sketch. This is where i would generally select two lines, and constrain them to be equal in length.
Is there a reason for this omission? Should I be worried that my menus are not showing the full options for constraints?
Photoshop :: No Selection When Exiting Quick Mask Mode
Jan 27, 2006trying to mask a certain area of a face with another picture, so I use the quick mask tool to paint in the area, but when I exit it and enter standard mode, there is nothing selected. It does however act as if there is a selection, because the other layer only is added to that section.
Also, I don't know if this is related to the other problem, but when I move another image into the original one to create two layers, then select the overlay blending option, I am happy with how it looks. However, after adding the layer mask, the other layer is really pale around the masked area.
