Using Autocad 2000LT with Windows XP and would like to make some lines in the drawing wider and or bolder. how to make certain lines wider so they would stand out from the rest of the drawing.
View 6 RepliesI am using Autocad 2000. When I view a 3D object from, say, a top view, I would like lines that would normally be hidden to appear as a dashed lines rather than simply disappearing. Otherwise, it's not possible to use a 3D model to produce a standard shop drawing. Without hidden lines appearing properly (not as solid but as dashed!) there is too much detail that cannot be seen. I have tried playing with many different settings and variables to no avail.
View 5 Replies View RelatedUsing AutoCad Map 3D 2012; Created a DEM mosaic, how do you hide or get rid of the seam lines when viewing or plotting??
View 5 Replies View RelatedI want to create the effect with a photoshop tool that makes one side of a text sentence look smaller than the other, as if you were looking at your tv from a side angle and the part of the sentence closest to you looks a little bit larger than the side of the text furtherst from you.
View 2 Replies View RelatedSo I have a student who wants to put these lines in the object. Since it would be very difficult to make these lines enclosed and looking right is there anyway to put these lines in the object. I don't understand why Emboss works on letters but not lines. That is all letters are.
View 9 Replies View RelatedIn other softwares when you creat a spline you are able to adjust the curvature between points by dragging the slope handles at a node. In my file, I have thus far been unable to fair my splines with any kind of consistancy. Also, it should be possible to place a tangent constaint to a straight line at a point, yet I haven't been able to do that either. According to the help files this should be an easy thing to adjust, Why am I not able to?
View 9 Replies View RelatedI have text from dt command, circle and leader line. After selecting them I use the copy command and starte pasting all over my drawing. Probable about 6 copies. about 3 or 4 of them end up not being able to select them. So if i want to edit the text, move all three entities or just delete them i cant. I figured out the only way to delete these "unselectable" objects i copied is to only have that layer on, type selectall and delete. Why this happens and why if i did 6 pastes it only happens to 3 or 4 of them? does it have to do with feature lines? I do have 3d lines in this dwg but i should still be able to select what i copied.
View 7 Replies View RelatedI remember being able to select 'Print Grid' back when I used AutoCAD 2000, but never needed to print the grid lines until about a year ago. AutoCAD and AutoCAD LT cannot do this. It seems only AutoCAD Civil 3D users have this option. Basically I need to print the drawing with a grid on paper and/or a mobile device so a field technician can draw conditions to scale easily and accurately. I realize this must not be in high demand, but there are a number of users who have asked about this. They are told that it is only a 'drawing aid' and they should array their construction lines to print their own grid. This is not a good solution for repetition of printing scaled field drawings, and certainly not 'state of the art' technology. Is this feature removed so we will have to search out the higher priced product? It seems like 'Print Grid' could be easily returned to all AutoCAD. Probably just a system variable that was removed when we weren't looking.
View 3 Replies View RelatedWhen printing in AutoCAD 2011 when using the "DWG to PDF.pc3" printer, many lines in the resulting PDF are faded while others appear fine. I can zoom in and all the lines appear with the same weight. There are multiple layers on the drawing but all contain the same line weight and lines on the same layer appear with different weights.
This occurs on all AutoCAD files and all users. I have tried changing pin assignments with no success. Printing directly to Adobe PDF does not result in this issue but with each sheet of drawing being a different file this process uses a lot of time.
I have a drawing with a screen and behind it is an xref drawing. When I print it to our KIP plotter the lines and other items behind the screen do not plot.
Here is how it is setup and what I have tried
The Xref itself is on its own layer and all the layers of the xref are set to a color that has thickness of .0138 and a 35% screen.
The hatch resides in the active drawing and is set to a color that is also .0138 thick but at a 20% screen.
The hatch is a DOT hatch at scale 1, but I have also tried it as a solid hatch
Lines merge is on and needs to be on.
I have made sure that the hatch is sent to the back and that there is no overlapping of data from other sources liek a second hatch or the same data in another xref etc.
I also tried setting the xref layers to another color that is .0256 thick with a 35% screen, but the results where the same. If i change the xref layers to a .0138 thick color with 100% screen, they do print over the hatch then.
I have a drawing that has a xref drawing inserted in it, that has lines still printing when they turned off off in the xref drawing, now I have got around this by selecting not to print in the xref drawing layer manager, but I do not understand why they are still printing if they are turned off ?
View 2 Replies View RelatedI have been send a dwg of a elevation of a kitchen plans that I want to include into my drawing, everything looks ok in autocad but when I go to print this drawing, non of the lines show up just a few random text boxes but no text, no layers are set to not print so why this is so.
I can not upload the file as its 3.32mb.
I have been making a cover for a dvd. I created a new project with the dimensions of the dvd cover which is: height: 18.2 cm, width: 27.2 cm. I finished the cover, and am now having difficulty printing.
I first tried flattening the image, creating a bmp, and printing with XP's photo printing wizard, but it came out that the height was ok - a little off, but the width was nearly 2cms too short. I tried just printing from photoshop, but it tried scaling it down. And, by the way, I am new to Photoshop CS3!
I have PDF files created in AutoCad Arch 2010. When I print them some of the grayscale comes out as random zig-zag line pattern. When I veiw the PDF it looks fine. Images that do this are usually backgrounds of logos or shaded driveways / sidewalks. Some sheets out of a given set will print fine while others do this zig-zag thing?
View 2 Replies View RelatedI dont know whats going on, but all of a sudden all the prints i do to PDF have a washed out faded look about them.Now all those lines are on the same layer, set to print with the same pen thickness, so why does one appear bold and one hardly visible at all?
View 9 Replies View RelatedWhen I use the built-in dwg to PDF for publishing multiable layout tabs I somtimes get extra and/or missing lines and objects on the PDF. When in model space no extra lines a present or missing. Everything is where it need to be. Same goes when a review the drawing in layout before I publish to PDF.
When I publish to paper its fine, no problems.
Have a slight problem with our new HP Designjet 500 printer which has just replaced our previous HP Designjet 500 printer that went bang a few days ago!
Problem is, all the lines or blocks etc within the drawing that are on colour 253 (a grey i use for certain elements of the drawing) are coming out purple when i print the drawing out!?
I copied some lines with global widths into another drawing and the line is displayed and printed with an outline around the global width of the line in the new drawing.. almost like it is a (3D offset for the global width, and not solid fill)
I have checked my fillmode. "fillmode = 1" and I also checked my UCS "UCS is set to current"
Why is this happening and if it has to do with some inherent properties of that new dwg?
Well I'm trying to convert an image into seperate layers with each individual color on it, in this case grey/white/red/black, and I cant seem to figure out how to do it...
I need to have each color on a seperate layer so I can screen print the image...does anyone have any ideas?
So I've drawn a 3d model in Autocad 2011 and when I come to print it in either layout or model view I get lines that appear. These lines do not show up in the print preview no do they look like they relate to the model itself, so I can't understand where they are coming from. I have the grid lines turned off and have exhausted everything else I can think of.
See the attached pdf for what I'm talking about.
when printing in view ports, wipeouts don't show. wipeouts are transparent.
ive tried copying the same wipeout lineweights and pasting it in new documents but have no problems there. i've tried re saving under a brand new document but still no luck. apparently it's only happening in the same 2 documents.
Im trying to plot a drawing and the grey lines are printing on top of black. how do I get black to print on top of grey? I am using MEP2013
View 4 Replies View Relatedhow thoses light lines are made over a grandient color like the attached image. I cant seem to figure it out.
View 5 Replies View RelatedIs there a way to do this without making a solid line then removing parts with the background color?
This would be a phantom line or centerline in engineering lingo.......
HP Designjet T520 36 inch ePrinter (CQ893A)
Latest HP-Driver: 61.125.1522.100
Latest Firmware: AXP2CN1325AR
Windows 7 64-Bit with AutoCAD MEP 2013 + 2014
we get rasterized diagonal lines when printing from AutoCAD on that Printer in A0 format, straight lines are ok.
Printing FIRST to an PDF printer an THEN to the T520 ist also ok (this is what the customer currently does and the quality is good). Got some suggestions from a local ACAD dealer (max. details in the printer driver) but no success ...
I have hand written initials. It looks to be something that was signed on copy paper and then the background was removed to get an alpha channel. These initials are a bit too thin to make an impact within the logo i am designing.
How do i thicken the lines without a stroke which would hurt the detail.?
I have been trying to set up macros which stop lines from printing for our company title block, I have been using and following this website Making Lines Not Print (with Events) | Boost Your BIM - making Revit even better. It keeps coming up with errors and therefore I can't run it.
View 4 Replies View RelatedHow to make the lines on this image smooth. You will see in the picture that there is some really choppy lines on the headphones and how to properly fix it. I've tried so many times and can't do it.
View 3 Replies View RelatedIs there an easy way to make the dotted line around a cut out coupon?
View 2 Replies View RelatedHow do you smooth lines? Like if I trace something and the lines are just a touch jagged, how do I get them to look perfect? I'm using PS7.
Also, how could I make concentric circles? Or even just a hollow circle? I can use the shape tool to make a circle, but that fills it - is there a way to make it with just a 2 or 3 pixel outline and hollow in the middle?
I could edit an existing PDF made by another company, just change a few lines of text. The original file was around 3 mb. I add in a website, extension to the phone number, switch out the fax (That's it!) and save as a new version. It's now almost 30 mb. Why?? My work email won't let me send something of that size.. I tried saving as smallest file size w/ preserving editing and it came out to be 15+ mb.
View 4 Replies View Related