AutoCad 3D :: Getting Hidden Lines To Appear Properly When Viewing Model
Jun 17, 2011
I am using Autocad 2000. When I view a 3D object from, say, a top view, I would like lines that would normally be hidden to appear as a dashed lines rather than simply disappearing. Otherwise, it's not possible to use a 3D model to produce a standard shop drawing. Without hidden lines appearing properly (not as solid but as dashed!) there is too much detail that cannot be seen. I have tried playing with many different settings and variables to no avail.
I'm drawing objects (walls, platforms, etc.) in 3d made up primarily of extruded polygons. I want to be able to plot these objects in a way that hides all of the lines which are obscured by other objects. Currently I have my viewports set up with a 2D Wireframe visual style and a Hidden shade plot. This isn't working for me. I'm still getting all of the lines in the drawing visible no matter what.
Here's the strange thing: It seems to work perfectly fine in plan view, but not in front view. Also, it's worked fine in the past. It seems that the problem has gotten progressively worse over the past year or so.
Using Autocad 2000LT with Windows XP and would like to make some lines in the drawing wider and or bolder. how to make certain lines wider so they would stand out from the rest of the drawing.
I am using AutoCAD Plant 3D 2012 and working with the P&ID portion of the software. I created a block (to represent insulation with electric heat tracing) with multiple lines using multiple settings. All of the lines are on layer 0, the line weight is set to by layer. All of the lines have a linetype of by layer except one line which I need to be hidden. This block appears correctly on my screen, but when I print, the hidden line prints continuous.
My brain is exhausted and I think this is just a setting somewhere I can not seem to locate.
2d simple circle... I would like to define a circle using hidden lines. I also would like to have the hidden lines extend passed the circle by .25 of an in. I would also like to define the center of the circle aesthetically rather than just draw these hidden lines in.
maybe I was dreaming. Maybe I've gone round the bend. I seem to remember somewhere a check box that would show hidden lines in paperspace viewports. For instance, a through hole, or a cavity in something.
Been a while since I've done much besides architectural drawing, so maybe I'm hallucinating.
I also distinctly remember the monochrome plot style always printing in black and white, even in a PDF. Today, the objects in modelspace are in color, and anything in paper space is black and white.
What is up with that? I must be missing something obvious, because I've screwed around with this for an hour and can't figure out what I've done to cause this.
I need hidden lines in my drawings for the shop floor and the pictures below is the problem. It shows the hidden lines in the veiwport in paper layout but when I print preview or print i does not show them at all. windows 7 autocad 2007.
I'm opening a drawing created in AutoCAD 2008, which is plotting hidden arcs as solid lines. Straight hidden lines are dashed as normal. I've attached both the paperspace view and the plot preview to show what I mean. The outer radius is showing as dashed in paperspace view, but appears as a solid line when plotted. The straight line leading to it is dashed in both views.
Im trying to plot a 3D object in Autocad 2009 but can't remove the hidden lines. The "Hide" command removes the appropriate lines in the viewport and in the print preview but the print-out still appears with all the lines.
What I'm looking to do is show the hidden lines blocked by a part in a plan view but not all of the hidden lines. Ie. I have a top view showing a clearance. If I turn on that clearance a portion of the original part is not viewed. When I turn on hidden lines I now see every hidden detail of that part (I didn't turn on hidden lines for the entire drawing). I then have to eliminate all the lines I don't want which is both tedious and cumbersome. Is there a way to turn on just the lines hidden by a particular object but not all the hidden lines of the part.
I need to have hidden lines on a 3D object dashed. So basically I need all the lines but those lines that are at the back of a cube(wich are normaly hidden), they need to be dashed. See the attachment
I am very new to autocad and i am trying to duplicate a template in my text book. (Yes, i'm an old new student). I have a drawing that i am trying to add a hidden line to and when i pick my start point and then select my second point, the line will snap to the nearest corner instead of staying where i put it.
In my model, hidden lines look fine (ltscale is 1). But in my layouts (which I created with layoutwizard) the dashes and spaces are very large. How do I scale them down? (trying to use ltscale in the layout also applies it to the model so now lines appear as solid)
So my original problem and question was apparently answered by this thread, but I don't understand how to implement the fix. how to adjust the resolution when viewing my model? [URL]...
I am doing a .idw drawing of an assembly that I have several parts that I do not want to appear in the BOM parts list. I have therefore set these parts as Reference parts however this has caused them to appear as "hidden type" lines in the drawing and are even visible through other parts.
Is there any way to make these parts appear in the drawing "as normal" and not be listed in the parts list?
I"m using AutoCAD Electrical 2013 but this is more of a general CAD question.
I'm working with floor plans from another company, the drawing contains xref for the floor plans and other blocks. I need to label some of our equipment. I'm simply using a DTEXT label inside a rectangle as a block with the text as an atribute.
I'd like to place the label on the floor plan and have it hide anything underneath. I do this with 3D blocks for other work, but I'm looking for a quick and dirty solution.
I don't know if it is a bug or a setting, but in Inventor 2014, when I work on a part inside an assembly, with hidden lines visible, I am not able to see hidden lines from other parts.
is this a bug in Inventor 2014, or can this be changed in settings?
I really need that x-ray overview when projecting edges from hidden parts.
Is there way that within a drawing view, hidden lines can be shown for only some of the parts of an assembly, rather than just being a global toggle setting for the whole view? I know that it is possible to hide individual lines, but It would be good to be able to do this on a part basis, as some drawings can have thousands of hidden lines that would need to be selected and turned off.
Is it possible to show hidden lines in one part of a .idw view while the rest of the view does not show hidden lines? In the attached image I want to show the pull handle and towel bar through the glass in the door. The only way I know how to show this currently is to turn off the visibility on the glass.
Inventor 2013 Windows 7 Professional 64-bit SP1 HP EliteBook 8470w Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz Memory: 16 GB AMD FirePro M2000 3D Connexion SpacePilot
I have a problem with my Inventor crashing everytime i try to set a .iam view in my blueprint to hidden lines. First i tried to make a specific part of the .iam hidden lines and it crashed, then i tried to make the hole view hidden and it still crashes.
"unhandled exception"Autodesk Inventor Professional 2011
Problems I'm having with hidden lines being visible in certain viewports and not others.I've dimensioned my drawings in model space, which I prefer, and put the dimensions on a separate layer. However, including that layer in the viewport causes the hidden lines to be visible when plotted. If I turn that layer off, everything works great.
I have dimensions for the same object in plan view that I'm showing in a different viewport that works just great, but in the front elevation viewport it gets all screwy.
I can dimension in paper space just fine.I prefer to dimension in model space whenever possible.
I am currently using the visual style "Wireframe" and cannot seem to figure out why my lines won't plot out as dashed lines even though they are dashed in my layout. I have been playing around with my LTSCALE,PSLTSCALE but nothing seems to be working.
I'm trying to plot a 3D object but can't remove the hidden lines. On typing "hide" they are removed and appear removed in the plot preview but they still appear in the hard copy.
I'm trying to print off an installation drawing which has some conduit running down through a wall. What I want is to show the conduit in the wall as a hidden line but I'm not able to do so. I'm using AutoCAD 2013.
