Im trying to plot a 3D object in Autocad 2009 but can't remove the hidden lines. The "Hide" command removes the appropriate lines in the viewport and in the print preview but the print-out still appears with all the lines.
View 1 RepliesI'm drawing objects (walls, platforms, etc.) in 3d made up primarily of extruded polygons. I want to be able to plot these objects in a way that hides all of the lines which are obscured by other objects. Currently I have my viewports set up with a 2D Wireframe visual style and a Hidden shade plot. This isn't working for me. I'm still getting all of the lines in the drawing visible no matter what.
Here's the strange thing: It seems to work perfectly fine in plan view, but not in front view. Also, it's worked fine in the past. It seems that the problem has gotten progressively worse over the past year or so.
I'm using AutoCAD 2008.
I'm opening a drawing created in AutoCAD 2008, which is plotting hidden arcs as solid lines. Straight hidden lines are dashed as normal. I've attached both the paperspace view and the plot preview to show what I mean. The outer radius is showing as dashed in paperspace view, but appears as a solid line when plotted. The straight line leading to it is dashed in both views.
View 4 Replies View RelatedI'm trying to print off an installation drawing which has some conduit running down through a wall. What I want is to show the conduit in the wall as a hidden line but I'm not able to do so. I'm using AutoCAD 2013.
View 4 Replies View Relatedtrying to plot a layout with "hidden line" style (see attached files). i tried almost every combination of settings and probably found a bug?
the exported (plotted) DXB file still contains edges that should be invisible.
should i do something differently?
I'm laying out a drawing. I use a visual style with facet edges and occluded edges dashed and intersection edges dashed. To give my lines hidden fo fabricators to know witch way to face angle iron and so on. But here is the big problem i do a veiw port with 4 shots 1 isometric solid 1 top hidden lines front hidden lines and right hidden lines. so first time i plot it, it will work fine then i go back to plot then the lines ither become not shown at all or they will be solid. even know the veiwport still shows them as hidden lines. If I delete the veiwport and make a new veiport all over again it will work for a single print then will not show it all over again.
View 9 Replies View RelatedWhen i try and plot my 3D model in the Hidden style, so it simply looks like a black line drawing the plot comes out weird. The plot for some reason adds a thick black line around my entire plot, and makes all the other lightweights look faded out. How can i fix this??primary bar 3-Layout2.pdf
View 1 Replies View RelatedWhy I can't set the hidden lines viewbase option to shaded with visible lines mode?
View 9 Replies View RelatedWe have been trying to plot some 3D objects in our drawing with a hidden line. We need the drawing to not show the hidden 3D lines but to show the edge lines of the object to plot as a hidden line.
View 2 Replies View RelatedRe: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
I am using 2012 Architecture and when plotting layouts it is converting curved surfaces into liniar hatched messes, my office just converted to 2012 from 2006.
i am using legacy hidden with monochrome.
i am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
How do I convert Detail Lines to non-plotting Reference Lines or Reference Planes? (or to a reference line that would not plot in the future?).
View 2 Replies View Relatedi xref a floor plan in which one of the sections has hidden lines. In the file with the XREF in it, the hidden lines are not showing.
View 9 Replies View RelatedI am using AutoCAD Plant 3D 2012 and working with the P&ID portion of the software. I created a block (to represent insulation with electric heat tracing) with multiple lines using multiple settings. All of the lines are on layer 0, the line weight is set to by layer. All of the lines have a linetype of by layer except one line which I need to be hidden. This block appears correctly on my screen, but when I print, the hidden line prints continuous.
My brain is exhausted and I think this is just a setting somewhere I can not seem to locate.
2d simple circle... I would like to define a circle using hidden lines. I also would like to have the hidden lines extend passed the circle by .25 of an in. I would also like to define the center of the circle aesthetically rather than just draw these hidden lines in.
View 3 Replies View Relatedmaybe I was dreaming. Maybe I've gone round the bend. I seem to remember somewhere a check box that would show hidden lines in paperspace viewports. For instance, a through hole, or a cavity in something.
Been a while since I've done much besides architectural drawing, so maybe I'm hallucinating.
I also distinctly remember the monochrome plot style always printing in black and white, even in a PDF. Today, the objects in modelspace are in color, and anything in paper space is black and white.
What is up with that? I must be missing something obvious, because I've screwed around with this for an hour and can't figure out what I've done to cause this.
I need hidden lines in my drawings for the shop floor and the pictures below is the problem. It shows the hidden lines in the veiwport in paper layout but when I print preview or print i does not show them at all. windows 7 autocad 2007.
View 1 Replies View RelatedWhat I'm looking to do is show the hidden lines blocked by a part in a plan view but not all of the hidden lines. Ie. I have a top view showing a clearance. If I turn on that clearance a portion of the original part is not viewed. When I turn on hidden lines I now see every hidden detail of that part (I didn't turn on hidden lines for the entire drawing). I then have to eliminate all the lines I don't want which is both tedious and cumbersome. Is there a way to turn on just the lines hidden by a particular object but not all the hidden lines of the part.
View 1 Replies View RelatedCan I get AutoCAD to show hidden lines from a 3d drawing created in AutoCAD 2012?
View 2 Replies View RelatedI need to have hidden lines on a 3D object dashed. So basically I need all the lines but those lines that are at the back of a cube(wich are normaly hidden), they need to be dashed. See the attachment
View 9 Replies View RelatedI am very new to autocad and i am trying to duplicate a template in my text book. (Yes, i'm an old new student). I have a drawing that i am trying to add a hidden line to and when i pick my start point and then select my second point, the line will snap to the nearest corner instead of staying where i put it.
View 9 Replies View RelatedIn my model, hidden lines look fine (ltscale is 1). But in my layouts (which I created with layoutwizard) the dashes and spaces are very large. How do I scale them down? (trying to use ltscale in the layout also applies it to the model so now lines appear as solid)
View 2 Replies View RelatedI am doing a .idw drawing of an assembly that I have several parts that I do not want to appear in the BOM parts list. I have therefore set these parts as Reference parts however this has caused them to appear as "hidden type" lines in the drawing and are even visible through other parts.
Is there any way to make these parts appear in the drawing "as normal" and not be listed in the parts list?
I"m using AutoCAD Electrical 2013 but this is more of a general CAD question.
I'm working with floor plans from another company, the drawing contains xref for the floor plans and other blocks. I need to label some of our equipment. I'm simply using a DTEXT label inside a rectangle as a block with the text as an atribute.
I'd like to place the label on the floor plan and have it hide anything underneath. I do this with 3D blocks for other work, but I'm looking for a quick and dirty solution.
I want to show only a few hidden lines in a drawing view.
I set the view to show hidden lines, then i attach a sketch to the view and project the hidden lines that i want.
But when i put back the view to hidden lines removed, the lines on the sketch disappear as well
I don't know if it is a bug or a setting, but in Inventor 2014, when I work on a part inside an assembly, with hidden lines visible, I am not able to see hidden lines from other parts.
is this a bug in Inventor 2014, or can this be changed in settings?
I really need that x-ray overview when projecting edges from hidden parts.
Is there way that within a drawing view, hidden lines can be shown for only some of the parts of an assembly, rather than just being a global toggle setting for the whole view? I know that it is possible to hide individual lines, but It would be good to be able to do this on a part basis, as some drawings can have thousands of hidden lines that would need to be selected and turned off.
View 2 Replies View RelatedIs it possible to show hidden lines in one part of a .idw view while the rest of the view does not show hidden lines? In the attached image I want to show the pull handle and towel bar through the glass in the door. The only way I know how to show this currently is to turn off the visibility on the glass.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I have a problem with my Inventor crashing everytime i try to set a .iam view in my blueprint to hidden lines. First i tried to make a specific part of the .iam hidden lines and it crashed, then i tried to make the hole view hidden and it still crashes.
"unhandled exception"Autodesk Inventor Professional 2011
Problems I'm having with hidden lines being visible in certain viewports and not others.I've dimensioned my drawings in model space, which I prefer, and put the dimensions on a separate layer. However, including that layer in the viewport causes the hidden lines to be visible when plotted. If I turn that layer off, everything works great.
I have dimensions for the same object in plan view that I'm showing in a different viewport that works just great, but in the front elevation viewport it gets all screwy.
I can dimension in paper space just fine.I prefer to dimension in model space whenever possible.