So my original problem and question was apparently answered by this thread, but I don't understand how to implement the fix. how to adjust the resolution when viewing my model? [URL]...
View 5 RepliesI was experimenting with 3d model texturing in CS4. However whenever I zoom into the model I was trying to texture, it becomes very pixelated to the point of where I couldnt tell what it is supposed to look like. The only way I can tell what it is anymore is while using the camera rotate, the model once again comes back into focus with the sharp edges that I desire.
View 2 Replies View RelatedIf there is a way to view your 3d model in perspective view in model space.
View 4 Replies View RelatedI've mapped a 16"(w) x 8.5"(h) label onto a cylinder using the 3D tools in Photoshop CC, but the proportions of the cylinder model are too tall and too narrow. Is it possible either to adjust these preset object models or to create my own?
View 2 Replies View RelatedI have a problem with the display of background images in the viewport when using Nitrous display mode. Every image I load shows very pixelated and low-res. Then I switched to Direct3D and the image is crystal clear. Why is that? How can I make images in Nitrous show that clear? I tried modifying the 3dsmax.ini file but changing the texture limit values had absolutely no effect.
View 4 Replies View RelatedI am using VS X2. I am trying to create a DVD of my project. I have assembled my files/projects, created a menu, and previewed. This is as far as I can get. The prompts at the bottom of the page are not displayed properly. I have a "back" prompt in the lower left and it looks like there is the start of a prompt in the lower right. I have adjusted my screen resolution to no avail.
View 2 Replies View RelatedWe are new to Revit, and have done a couple of projects in Revit. We have separate models for arch, mech and elect (no struct, this is done outside our office). We currently link models to each other as needed, the architect will link mech and elec. The mech eng. will link arch and elec and so on. Mention the use of a blank model onto which you link all models. I never got a chance to ask the individual how they use it or how it would benefit the process.
View 1 Replies View RelatedI am making a control console with a bunch of plastic tags on my pilot devices. I use the sketch text tool to write the label on each tags.
When comes the time to make my drawing, I get my model sketch and they show on my 2D, no problem.
Well today, it seems Inventor 2014 just gave up on giving me my sketches. Here is the console view of of the lid with the tag texts showing:
Now let's go over the second lid on the same plan and get my model sketch to see the rest of my text.
Click on it and ....
Nothing! still no text.
Windows 7 Ultimate 64-bit SP1
Intel Core i7-4930MX CPU @ 3.00GHz
32.0GB Dual-Channel DDR3 @1600MHz
NVIDIA GeForce GTX 780M 4GB Ram
240GB SSD/500GB HDD
Autodesk Product Design Suite Premium 2014
I am using Autocad 2000. When I view a 3D object from, say, a top view, I would like lines that would normally be hidden to appear as a dashed lines rather than simply disappearing. Otherwise, it's not possible to use a 3D model to produce a standard shop drawing. Without hidden lines appearing properly (not as solid but as dashed!) there is too much detail that cannot be seen. I have tried playing with many different settings and variables to no avail.
View 5 Replies View RelatedI was wondering if there was a way to see and adjust paperspace viewports in modelspace. By adjusting viewports in modelspace I would like to be able to adjust the size of my rectangular viewport in modelspace to encompass what I want, while keeping the viewport on paperspace the same size (to encompass the entire print page). I would like my modelspace viewport to simply adjust the zoom in and zoom out of my paperspace viewport.
Any better method than individually zooming in and zooming out and re-adjusting my paperspace viewport.
When I go to model space I am unable to adjust the view scale. Although I can get to the prompt for a new scale value, the program will not accept my changes. Is this locked somehow?
View 6 Replies View RelatedI have a school project due tomorrow and I am almost completely finished. Except one part says that "Model adjusts correctly as __ varies". When I change a parameter, only that parameter changes and the rest of the part remains the same. I'll attach the assigment. I'll attach my work also if requested.
View 9 Replies View RelatedI have a terrain model (geo tiff) and a satellite image (geo tiff). When I drape the sat image over the terrain and switch to 3d I get the 3D drapped image but not in full resolution.
I want to print the 3D model but in full resolution.
We are looking for a workflow example of developing casting models into machining models.
Typically our castings are made from different materials (Fig-1) and then machining (Fig-2) are created from these castings.
Is creating the casting as an iPart (with different materials) and then deriving the machining from the casting the proper method?
Doing it this way seems to force us into making a machining for each casting material instead of just one machining that is an iPart. How should this be set-up for BOM purposes and for use with Vault (Base Version)?
In AutoCAD 2013 model documentation, how do you increase the resolution of shading so it more closely follows the linework? See example.
View 4 Replies View RelatedI need to plot a drawing with a few plans, which are in 2D but also a 3D model of the intire installation and a few side views, which are side views of the 3D model.When I plot the drawing I am able to get the side views in black and white by taking the following steps:(i got these steps from this post: URL....
- set the visual style (in model space) to hidden or wireframe.
- in the layout you select a viewport that conntains a 3D visualisation and double click in that window to set the visual style to 2D wireframe and also set the viewports shade plot to hidden.
because the plotter is black and white only I see those side views in different shades of grey but the problem is that the difference in grey isn't clear enough (and yellow pipes are hardly visible) and I can't adjust these. When adjusting the .ctb it only affects the 2D views and not the 3D views.
It is possible to change the greyness by changing the color of the diffent pipes that are in the drawing but this is not a desired option by the client.how to alter the shades of grey in 3D visualisations so that not all pipelines look the same .I attached a file of what the plot preview looks like and another of what the actual plot looks like
I realize the nature of my question maybe asking the impossible, but I have a low res image I downloaded from the internet, placed in an InDesign page, blew it up and printed it out. I was going for the distressed look that it has, it looks ok when I print it out considering it's low res and I blew it up fairly large. However, it's a little too pixelated to look professional when printed. Are they any tricks or things I can do to make it look higher res for print. I've attached the image as well as a screenshot of the InDesign file so you can see it in context.
View 4 Replies View RelatedI am a Photoshop newbie and I have a series of graphics (all 72dpi from a website) that I would like to print in 300dpi. Is it possible to take a 72dpi .jpeg or .gif file and easily convert it to a higher resolution printable graphic? If Photoshop can't do it, is there any type of program that can?
View 1 Replies View Relatedi have some big .jpgs with low resolution say 10x10 inch at 72dpi.
is it possible for me to convert it to 2x2 inch at 300dpi?
I'm trying to create a high resolution version of a low resolution texture used in a game. I've found a pattern that I think is acceptable, from a real image.Now the question is this: how can I colorize the large image to that it is as resemblant as possible to the original one? I've tryed a simple colorize, but the result is not so good...
Original texture:
[URL]
The image to be colorized:
[URL]
how to make achieve a pixelated, tiled, grid-ish look?
View 2 Replies View RelatedI've created a 3D product model in an application that does not have any text capabilities (Autodesk Inventor Fusion 2013). I'm trying to get that model into AfterEffects (AE) via the Photoshop live object technique.
But before I open it in AfterEffects, in Photoshop CS 5.5 Extended, I'm trying to add the product text graphics to the "Diffuse" layer of the model so, when animated in AE, all the text moves with the appropriate perspective, etc.
For the life of me I can't figure out how to format the text to fit the model.
Fusion saves files natively to .DWG format, but they appear non-standard and without some key data.
I was able save the file as a "STEP" file .stp, then translate to .3DS format. That file results in a model that opens just fine in Photoshop and when saved in .psd format, and opened in AE as a Photoshop Live object, works fine. I can't image getting the text on the surface in AE would be easier/better than Photoshop.
Each time I double click on Layer 1's Diffuse (texture) sub-layer (is that the correct term?), I can put some text in the new window, but the scale is always way wrong, the orientaion is 90 degrees off (counter clockwise), and the text is clearly trying to wrap and repeat all around the model. I'm just trying to get a set of text (several pieces in different locations - company name, product name, some small additional text) on one side of the surface bound as if it were part of the model.
As an aside, I did try to add the 3D model, converted to a .DAE file, to presets > meshes as suggested in the help files, so I could treat it like one of the 3D object presets, and add the text that way.
No matter what I do I can't get the mesh to appear in the pre-set list. I don't see any way to "activate" the mesh other than place the file in .DAE format in that folder. Yes, I've exited and re-started Photoshop many times.
So sick of not being able to view PSD thumbnails, not even from the regular "OPEN FILE" dialog in Photoshop CS6.
View 18 Replies View RelatedI produce a simple piece of HTML mailing for my clients to send as an e-mail blast. I typically create these, and they contain graphics and some direct hyperlinks with URL information embedded within a slice. I Export to Web and place the produced files on my FTP, get the link and I send out a blast e-mail. When I test this on my Mac (Mail) the piece looks perfect.
Some of my clients have replied that the output is desheveled. Indeed it does look that way. It looks as there are shifted or missing slices. I started to send out a blast test to all of my personal e-mai accounts, and I did get questionable results through G-mail and my web hosts own client. But the art looks great following the link to the FTP. All of th eembeded links work. I'm sure most of my clients are on Outlook and WIndows, so I don't know how to correct this.
Microsoft Camera Codec Pack (16.0.0652.0621)
Download Details - Microsoft Download Center - Microsoft Camera Codec Pack
I had to have my hard drive replaced and Photoshop CS3 installed on the new drive. I am having a problem with viewing photos in Photoshop. When I click "Fit Screen" the photo is distorted with the top horizontal ruler being longer than the vertical. I thought that before when I clicked "Fit Screen" the proper and accurate proportion of length to width was maintained on the screen instead of having the entire screen filled.
View 1 Replies View RelatedI can see the thumbnails of most pictures in my folders but I can't see my PSD thumbnails. What can I do to change this?
I'm running Windows XP and Photoshop CS2.
I just played around with a new sig and I want to upload and put it in my profile. I save it as a .jpg and then upload. I update my profile and the dreaded box with the red x comes up... Ive spent my entire night trying to see what is wrong and I give up. My previous images Ive done are fine, but not anything I make now. Anyone have an answer as to why I can't view my images online? I have windows XP and I can view them fine through the windows viewer...
View 1 Replies View RelatedWhen I open an image I can see it in the navigator pane but it doesn't display in the main pane where I can edit it.
View 1 Replies View RelatedI have built up quite a collection of brushes over the years, and I was wondering if theres any way of viewing them without loading each one into Photoshop looking at them then having to delete them if they arn't the ones I want
(I allready have loads loaded which are a pain to scroll through looking for the right one)
Is there a brush viewer or something around?
Why is it that Photoshop doesn't import 3D models for popular software like Cinema 4D (C4D) while the U3D extension of that weird and unpopular unprofessional heavily copied but little used Ulead cool 3D is in the list? I think it would be much more important to be able to import C4D files.
View 4 Replies View Related