AutoCAD Inventor :: Cannot Get Model Sketches On All Models In Drawing?
Nov 26, 2013
I am making a control console with a bunch of plastic tags on my pilot devices. I use the sketch text tool to write the label on each tags.
When comes the time to make my drawing, I get my model sketch and they show on my 2D, no problem.
Well today, it seems Inventor 2014 just gave up on giving me my sketches. Here is the console view of of the lid with the tag texts showing:
Now let's go over the second lid on the same plan and get my model sketch to see the rest of my text.
Click on it and ....
Nothing! still no text.
Windows 7 Ultimate 64-bit SP1
Intel Core i7-4930MX CPU @ 3.00GHz
32.0GB Dual-Channel DDR3 @1600MHz
NVIDIA GeForce GTX 780M 4GB Ram
240GB SSD/500GB HDD
Autodesk Product Design Suite Premium 2014
View 6 Replies
ADVERTISEMENT
Apr 16, 2012
I can "Get Model Sketch" to make it appear visible in a drawing view. But I can find no way to use these "edges" or "lines" or "entities" or whatever they are, later in a drawing view sketch. No way to project them from Model Sketch to Drawing View sketch. I can attach leaders and dimensions to these Model Sketch entitites but I can find no way to use them in a sketch owned by the drawing view. Am I missing something?
IV2012 SP1
View 8 Replies
View Related
Nov 5, 2012
Once I check to show model sketches I cannot set it back since it getting inaccessible.
how to set it back to not show the sketches?
[URL]
View 1 Replies
View Related
May 13, 2013
In my section view, Get Model Sketches is inactive (greyed out; see attached).
It was OK up until recently, but now it would not show any sketches no matter what I try to do.
I would hate to recreate the view again.
View 3 Replies
View Related
May 31, 2012
Is there a way to easily "retrieve" solid model features and sketches from a stp file imported into Inventor Pro 2012 without having to recreate them?
View 2 Replies
View Related
Mar 20, 2012
Quite often we cretae schematic line drawings for clients approval before creating full 3D models for production. Is it possible to achieve this in Inventor and maybe go on to use the sketches as a master filoe to drive the design? Or should I continue to get approval based in AutoCAD and then switch over to Inventor?
View 6 Replies
View Related
Jun 29, 2011
I'm having a problem with sketches not appearing on drawings in Inventor 2012. This is for a product line made using iparts and iassemblies, and affects approximately 150 drawings.
These sketches were made in Inventor R11, and are attached to part features in the drawing view. When opening these drawings in 2012, the dimensions that were attached to the sketch are still visible, (albeit in the wrong places and on the wrong features), but the sketch itself is not. The sketch still exists as an item under the view, but the actual contents of the sketch (lines and hatching) are gone.
The assembly consists of three identical cylindrical parts with mitred ends welded together in two operations to form a T-shaped part. I have a view representation for each operation. The drawing has each view on one page.
The first step requires welding the two parts together to form an "L" shape, and then cutting off a portion of the corner of the "L" to facilitiate joining the third part in the second operation. In my assembly, I mated the two cylindrical parts together, then created a sketch and using geometry projected from the parts, defined the area of material removal at the corner and extruded the feature. Then, I mated the third part.
However, since I cannot turn off the extrusion when defining a view representation, I needed to redraw the corner I removed so it reflected reality when showing this first phase on the drawing,. I accomplished this using a sketch on the view in the .idw, again using geometry projected from the part. This worked out excellently in Inventor R11. Not only was I able to show the missing part, but because this was an iassembly made from iparts, I could use the same drawing for differnet sizes by "saving as..." and then selecting a diffenent Assembly State on the Model State tab of the Drawing View Dialog Box. The views would update, and so would my sketch, since it was defined by the geometry of the part.
So we continued on this way, and now that we've moved to 2012, none of these sketches appear anymore. We're faced with having to redo this work on every drawing that we've created for this part -- about 150 or so.
View 7 Replies
View Related
Oct 1, 2013
I'm trying to show my tube and pipe route sketches in my drawing without populating my routes. In the past my tube and pipe assemblies have caused me and my company many problems. not populating the routes until final release can speed up our process a little bit.
View 3 Replies
View Related
Mar 11, 2013
I have two different models that I want to place on top of one another in a drawing. One is a before machining and the other is after. I would like to be able to show one model with a different line type on the drawing and have it superimposed on the other drawing so that somone can see them both and the difference between them. I looked at the Positional Representations feature and it does not seem to do this.
I am using Inventor 2013.
View 9 Replies
View Related
Nov 20, 2012
In Inventor Drawing Mode how to select the models in Browser tree using VBA, I think using selectset is not possible in my knowledge. Is there any other way to execute the selection .
View 1 Replies
View Related
Oct 6, 2011
We are looking for a workflow example of developing casting models into machining models.
Typically our castings are made from different materials (Fig-1) and then machining (Fig-2) are created from these castings.
Is creating the casting as an iPart (with different materials) and then deriving the machining from the casting the proper method?
Doing it this way seems to force us into making a machining for each casting material instead of just one machining that is an iPart. How should this be set-up for BOM purposes and for use with Vault (Base Version)?
View 3 Replies
View Related
Nov 30, 2011
I have parts that are similar and want to save a copy of the model and it's drawing together as a new part number. This way I don't have create a new drawing every time. I used ProE 2001 before I upgraded to Inventor 2012 and ProE would save them both together.
View 2 Replies
View Related
Nov 25, 2013
As this software continues to change it's behavior of function over nite. I am assuming due to new updates in inventor. I can no longer get my drawing to update per changes made to the model. This started about 2 weeks ago.
Change are completed perfectly, I open the drawing and it still has the old model represented. When I right on the view and open the model. Model contains all of my changes, but the drawing does not seem to care or notice that changes have been made and saved. I even closed inventor and reopened.
Even though I'm paid by the hour I really do not want to delete all views and start all over.
So the only answer is to delete all views replace them re dimension them and of course add any time consuming sketches.
10-15 minutes change now is going to take 3 hours. WHY can't autodesk make a stable piece of software?
View 9 Replies
View Related
May 3, 2013
how to identify the model associated with a particular PL on a drawing. I'm able to find a PL and write to the header which is cool. But I'm trying to determine the model associated with the BOM pipline so I can get it's P/N iproperty and write that to the PL header.
View 2 Replies
View Related
Jun 11, 2013
We are new to Revit, and have done a couple of projects in Revit. We have separate models for arch, mech and elect (no struct, this is done outside our office). We currently link models to each other as needed, the architect will link mech and elec. The mech eng. will link arch and elec and so on. Mention the use of a blank model onto which you link all models. I never got a chance to ask the individual how they use it or how it would benefit the process.
View 1 Replies
View Related
Nov 8, 2012
Inventor Pro 2012
After creating the desired frame using frame generator, I am creating a detail drawing. When I insert the parts list, the info applied is using the full length of the tubes before it was cut to fit. (to get rid of the over lap edges of the frame)
Attached is the part file used to create the frame. (Can't attached the frame, too big) I used
Also attached is the drawing to clarify the issue.
Total length of the frame is 116.75"
In reality is it made up of 2 short end pieces 23.375" + 2 x for pocket tubes (10") plus the center tube 50"
23.375+23.375+10+10+50=116.75"
Now from my part file, i just made 3 lines for the total length and 2 intersecting lines for the fork pockets. The parts list is using the initial creation length and not the altered cut length? Does this make any sense?
How can I get the parts list to represent values after a cut is done to the tube?
View 4 Replies
View Related
Jul 30, 2009
Apparently I can't edit model dimensions from a drawing because i did not select this option when i installed inventor 2010.
View 9 Replies
View Related
Nov 29, 2012
Is there a way to have a part, which is a part of a larger assembly, get the title, subject, etc. from its parent assembly? I have my template set to use the "Title" property in my title block but I'd like each individual part drawing to pull that "title" from the assembly, not from the part itself.
View 6 Replies
View Related
Sep 10, 2012
I have a part (partA) and a drawing of it (drawingA).I want to save a copy of both (partB and drawingB) and make changes to partB and drawingB will update.
To do this do I save a copy of partA first to partB and then in drawingA replace part to partB and then save a copy of drawing to drawingB
View 1 Replies
View Related
Apr 9, 2012
How can i create an isometric drawing from pipe model.
View 9 Replies
View Related
Dec 26, 2013
I did some digging and found the option to replace a model reference in an entire drawing, but I'm looking to change the reference in just a view. Consider the picture I have attached. I'm depicting top down views of these layers. Each layer requires changing the view identifier each time I drop a view. This would be considerably less time consuming if I could just copy/paste the view and change which part file it was pointing to.
View 2 Replies
View Related
Jul 27, 2012
I've got a drawing with multiple base views wich means multiple reference models. In my titleblock i've included the mass of my model through
Type: Physical Properties - Model
Property: MASS
But now it automaticly selects the first placed base model as the model to select the mass. how can i change the 'active' model to another model/base view?
View 2 Replies
View Related
Aug 1, 2013
I could not get the code to work for me, and I am not a programmer or pretend to be. I need to take a model and create a dwg with ilogic. It only needs to be one flat pattern view and one isometric view.
I also need it to have center marks for all the holes and I need to add certain dimensions.
View 3 Replies
View Related
Feb 14, 2011
Engineering drawing with dimensions for a ball joint? A .ipt file of a ball joint actuator will be the best.
View 8 Replies
View Related
Nov 12, 2013
I am working in one assembly. in that assembly i created all the part with using i part & same part i called in to the assembly & created i assembly. while creating drawing i have facing problem to show the model parameters in to the assembly drawing table. How to link the model parameters in assembly parameters with using i assembly.
View 1 Replies
View Related
Sep 20, 2012
So I made a shop drawing of an assembly, which is very complex and took a great deal of time to complete. It has 3 sheets and a bunch of different views and information already on the drawing.
Now the thing is I took the assembly and made it an iassembly; but I did this in another file so I wouldnt screw up all the work I did before. Now I realize that I dont have the links to the shop drawing that I wish I did.
how to link the shop drawing to the new iassembly model?
View 1 Replies
View Related
Mar 2, 2012
Is it possible to use the Measure.ExtentsLength in a drawing to get model dimensions?
What I am trying to do is get the overall dimensions of the model and place them in a sketch block in the drawings so our machinist can easily reference the stock material. I can't figure out how to get the overall model dimensions.
Windows 7 x64 -24 GB Ram
Intel i7-3840QM @ 2.8GHz
nVidia Quadro K5000M - 4GB
Inv 2013 SP2
Vault Collaboration 2013 Update1
View 3 Replies
View Related
Sep 11, 2012
Im trying to create some code for another user which takes the pre-selected drawing curve and retrieves the feature information from the model. More specifically, I want to pre-select the drawing curve of a hole, and then run the rule. The rule will take this selected drawing curve and get its model. Then from here I'm expecting I'll be able to use the Hole Feature classes in the API to retrieve the wanted information.
I've tried using SelectSet.Item(1by tut cannot seem to be able to set it as a drawing curve (or anything for that matter).
View 1 Replies
View Related
Mar 20, 2013
How can I display a sketch or projected geometry that is not a closed loop in a ipt drawing? Historically I have to use a closed loop and emboss in order to display the geometry in a drawing.
Then move that forward to a DXF file for its intended use. I think there should be a way to just have lines placed on the model and display it on a drawing without it having to be a feature.
View 8 Replies
View Related
Mar 11, 2013
Been trying to show multiple layers/coatings in my drawing for several hours now, and finally defeated,
I have a revolved part that's made of multiple layers -- aluminum, for example, with an anodized coating and then a paint on top. I need to make a detailed drawing to show how thick each layer is, and to that end, created the part profile, added an offset rotation for layer 1 and then another offset rotation for layer two. They're thus symmetric and in full contact, but separate, distinct layers. No problem.
Turning this into a precise drawing, however, is a bit harder, since all of the layers render into one monolithic revolution. I need to show those layers distinctly, like in the png file attached. Is that possible?
View 3 Replies
View Related
Jul 2, 2013
I have a automated ilogic model that is then used within a 2D drawing, this 2D drawing then has dimensions on it referenced to the the model.
This model changes in its length the dimension associated with its length then changes but the dimension text then goes outside of the dimension boundary (does not stay central). Is there any code that can scan the dimensions and in effect tidy them up?
View 3 Replies
View Related
