Why is it that Photoshop doesn't import 3D models for popular software like Cinema 4D (C4D) while the U3D extension of that weird and unpopular unprofessional heavily copied but little used Ulead cool 3D is in the list? I think it would be much more important to be able to import C4D files.
View 4 RepliesBaffing issue for us:
We have a "core & shell" model linked into a "fit-out" model. We are working with design options in the "fit-out" model with different design options.
1. In a 3D axo view and working in the main model, we can see the linked "core & shell" file.
2. In the same 3D axo view and working in the primary design option, we can see the linked "core & shell" file.
3. In the same 3D axo view and working in any of the other design option, we CANNOT see the linked "core & shell" file.
The visibility & graphics settings have not been changed. The worksets settings have not been changed. We have been unable to overcome this issue. We are simply flippiing between different design options and the linked model disappears.
I'm trying to explore possible options for displaying 3D geology models. In the attached I want to chop out the yellow solid and leave the other solids "as is" to reveal the various strata when the yellow solid is removed. I have removed the yellow solid but the results are not quite what I was hoping for.
View 6 Replies View Relatedactually for my job i've designed an assembly in "catia" and now i gotta animate that in "Max" for next two monthes.URL....actually when i import catia model as ".igs";
1.all the assembly will come in such a part (this is normal i think)
2. but another problem is that i dont have a smooth surface on my part. (just like it has low segments).
We just got our updated release of AutoCAD 2012 and I noticed it now supports direct import of Pro-E models, which is what our engineering department uses for one reason or another...
I'm currently using 3DS Max 2011... If Max 2012 support direct import of Pro-E models like AutoCAD is now doing??? It would be REALLY handy! Currently they export a either an STL or OBJ to me that I then can import into Max... would be nice if I could just take their native file and run with it!
Suitable software to import maya models to an AR project??
View 3 Replies View RelatedI'm looking to import a model with materials. Is 3DS the only file format that will carry this along? That would suck for me cause my animator does not use Autodesk software. I have an obj with the material jpegs but can't seem to find find the proper wrap mode that makes it all come together. Maybe FBX is a better option.
View 4 Replies View Relatedi've modeled a character or two from scratch in max. (nothing spectacular) I also used a character pack a few years ago. I was wanting some info on the best way to model a new character. I would like opinions on zbrush, poser, etc. Something that is very compatible with max.
What is the process that you take when creating a character. Don't feel the neeed to write a book I get the basics. Been out of the game for a while, but very glad to be back. Been playing around with fumefx, houdinni ocean, and ivy lately.
We are looking for a workflow example of developing casting models into machining models.
Typically our castings are made from different materials (Fig-1) and then machining (Fig-2) are created from these castings.
Is creating the casting as an iPart (with different materials) and then deriving the machining from the casting the proper method?
Doing it this way seems to force us into making a machining for each casting material instead of just one machining that is an iPart. How should this be set-up for BOM purposes and for use with Vault (Base Version)?
I'm using Photoshop Elements 11 and Premiere Elements 11. Both program are using one organizer and I would like to import my videos and photos with this tool. But I'm missing two options in this tool. The first is to make sub-folders with the capture-date without spaces between the date (spaces are still problems for some programs). The second option is a second location where the data is copied for backup. Is there a possibility to do this two options with the program or can you make an update in the future that include this two options.
View 1 Replies View RelatedOn the drop down menu on my pse11 the import/export options are unselecteable, why this is and how it can be resolved as I would like to be able to import things.
View 1 Replies View RelatedCould we have a more definitive way to establish personal defaults for IMPORT.
When I import from my camera card, I normally start in the Folder sub-panel of Library and do a right-click "Create a new folder inside ..." and then after that is completed I select the folder just created and right click again and "Import to this folder ..."
This brings up IMPORT with my destination already visually established AND the folder already created within my folder structure and then all I need to do is quickly verify my options and click IMPORT in the lower right corner.
But for the life of me, I couldn't get my options to be sticky ... e.g. preview resolution, destination, etc. I'd set them, do the IMPORT as above, finish it and when I'd go back in they wouldn't have been left the way I set them. But I knew that sometimes this DID happen.
Turns out that if you invoke IMPORT via the button in the lower left corner of Library and complete the sequence (rather than import to this folder via a right-click) ... then options set from that initiation point are sticky and are rembered the next time you go in.
My question is: could we not have a more specific way of saving the defaults on the screen so no matter how you entered IMPORT, you can establish your default and 'lock' it.
Running a script to open up files and convert to another type. When it gets to a TIFF type file a dialog window titled 'TIFF Import Options' is opening. This windows has an Options column that contains two radio selections for 'Convert Layers to Objects' and 'Flatten Layers to a Single Image'. How would I open the file with the 'flatten layers to a single image' set?
View 1 Replies View RelatedOne of the common processes we have to do is to transilate file formats into a type we can use. Most the time it is for use in AutoCAD MEP...
Is there a good one-stop place to get info on import export options from / to softwares included in Autodesk Building Design Suite Ultimate?
The options window will not display when typing "options" in the command line or selecting from the drop down. The options menu has to be hidden somewhere because AutoCad will not allow any other commands after typing options until I hit escape. I have tried restarting CAD and rebooting my computer with not luck.
View 9 Replies View RelatedI was experimenting with 3d model texturing in CS4. However whenever I zoom into the model I was trying to texture, it becomes very pixelated to the point of where I couldnt tell what it is supposed to look like. The only way I can tell what it is anymore is while using the camera rotate, the model once again comes back into focus with the sharp edges that I desire.
View 2 Replies View RelatedI imported a model and started altering the textures. I created textures added layers details and realized at a point that I need to modify my uv coordinates.
So back in my 3d application I did the changes and exported the 3ds file again.
Now here is my question. How can I import the updated mesh to my current psd and "tell" it to use the textures I modified before?
I have a good pic of a model in a pink dress. It is just a fraction too dark.
I would like to brighten it up a bit.
Are there any ways of doing this other than the brightness slider ?
1) If I add a lense flare to a layer, how do I remove it short of making backward steps? (cmd+option+z)
2) Is there a place I can get 3D models to play around with? Preferebly for free.
it is possible to custom clothing for 3D Daz models using Adobe Photoshop CS5 Extended? I can find tutors on painting models but nothing on making the custom clothing itself, not a texture for other clothing but making my own clothing for DAZ Kids4. I have been using Hexagon to work with clothing but was looking for a photoshop alternative method.
View 3 Replies View RelatedI'm using CS6 (x64, windows), and I'm extruding vectors by a few points to make 3D models of decorative walls for our modelers. They've constantly told me that there are far too many polygons in the models that Photoshop generates (mine are averaging between 20,000 and 30,000) and that even 3DS Max's "optimize" tool can't take it down to a really managable number (generally they only get them down to around 10,000).
Is there a way to reduce the number of polygons in models generated this way in Photoshop? Even the super simple ones that I extrude (with no curves at all) end up containing around 8,000 or 9,000.
I keep seeing in tutorials about 3D in Photoshop CS6 that refer to starter models that can be downloaded from Adobe but have not been able to find the location to view and download them.
View 4 Replies View RelatedPhotoshop has an issue right now in which when I import a 3d object (it doesn't matter which format, I've tried obj and cae) then it will split the object apart into multiple objects along where the borders of the uv map are (aka polyunweld). How do I stop it from doing that?
Here are images demonstrating what I mean exactly.
[URL].......
[URl]........
[URL]........
[URL]..........
I've mapped a 16"(w) x 8.5"(h) label onto a cylinder using the 3D tools in Photoshop CC, but the proportions of the cylinder model are too tall and too narrow. Is it possible either to adjust these preset object models or to create my own?
View 2 Replies View RelatedHas anyone been able to successfully import a collada Model containing textures into Photoshop CS4? I've been trying to open collada models from google's 3D warehouse, and when I open them, I don't see anything. It's clear that Photoshop creates a 3D layer, but you don't see anything by default.
When I play around with the imported layer, it's clear that some of the 3D information is there. If I set the render mode to box, wireframe, or any of the settings that don't deal with textures, I can actually see something a rudimentary version of the model.
I actually tested importing a collada model in CS3 Extended at work, and it imported fine, showing the textures and everything. When using CS4, I get the problem described above.
I've actually seen this issue both on Mac and PC versions of CS4.
what format i should use for exporting a 3d object in photoshop extended, to after effects keeping the object in 3d form?
View 2 Replies View RelatedI want to create a batch action that will process raw files by setting their workflow resolution option and image settings in camera raw. I can create a batch action by recording an open command for a raw file, setting the workflow resolution and image settings, and then stopping the action recording.
This creates an open action which captures the resolution , images settings instruction , and other settings for camera raw, but it also captures the camera model and workflow options are specific to a camera model. If I then use the action on multiple raw files from different cameras, raw files from the camera specified in the 'open' step will get processed as I want, but raw files from any other camera model will get processed with whatever workflow resolution option was used the last time I manually opened a file from that model in ACR.
I tried recording an 'open' step by bringing raw files from 3 different cameras into ACR and selecting to open them in photoshop, but that created three 'open' steps, one for each camera model, in the action. Running that action produced three versions of every image from every camera model. No good.
How can I create an action that will set the workflow resolution option based on the camera model, when images from different camera models are being processed in the batch?
I am using PSCS5 and ACR 6.7
If u have ever seen those spray painted galls , plz post a tutorial on how to do that. I mean any mag out there has some form of softening or spray painting going on, especially womens health mags... Are there tools u have to buy? Im more interested in finding out how to do it from scratch.
View 9 Replies View RelatedSo my original problem and question was apparently answered by this thread, but I don't understand how to implement the fix. how to adjust the resolution when viewing my model? [URL]...
View 5 Replies View RelatedIs it possible to use 3d max objects in autocad? I have objects but I dont know If i can import them. Im working in an interior right now and I only use 3d models in autocad. Or can any of you give me a site where I can download more detailed models that give more realistic renders?
View 2 Replies View RelatedIf I create a 3D model in AutoCAD 2013 using, say, 12 components; am I able to list the components in a report including any attributes that I attach to each component? Similar to Revit BIM.
View 2 Replies View Related