One of the common processes we have to do is to transilate file formats into a type we can use. Most the time it is for use in AutoCAD MEP...
Is there a good one-stop place to get info on import export options from / to softwares included in Autodesk Building Design Suite Ultimate?
I have recently upgraded my system from a Stand-Alone version of 2009 Professional to the Building Suite Ultimate 2013 Licensed Version from my office. I am looking for the ability to use the Harness tools. Can't find them, is this option is available in Inventor.
View 2 Replies View Related I been trying to make a deployment of Autodesk Building Design Suite Premiun 2012 from
a pc with XP 32 Bit, XP 64 Bit, and Windows 7 64 Bit and the aplicaciton stars well but then after a couple minutes. I got this error.
Cannot create deployment - "The copy functions cannot be used D:x86RAC2012
I'm trying to export Revit into Navisworks Simulate but there's no Navisworks tool in External tools. I did a full install of the Design Suite and checked Control Panel/ Programs/ Programs and Features for " autodesk navisworks simulate 2013 exporter plugins" but they're not installed. Are the plugins included in the Suite or do I download them from Autodesk?
View 2 Replies View RelatedWe have just recently install Building Design Suite Standard 2014 and the tool palettes DO NOT work.
Clicking on the standard palettes that load with ACAD will not even work. We have also tried to make new ones and the will not MAKE (for lack of words).
Here is the Autocad warning it gives us:
Unable to execute the tool. Possible causes are:
-The tool is not registered properly. Please check your installation.
-the tool is from another application and is incompatible with the current application.
We are running a new copy and it IS registered.
We using Vault to control our Inventor Standards and I know in the past Product Design Suites (2012) the design data versions were different in the fact that the Ultimate Version design data had more to it because of the extra features, therefore resulting in having to control two seperate sets of data.
Just upgraded our department to 2014 and it appears that the design data files between the Ultimate and Premium Suites are the same and would have to only control one set of data?
When I try to export a bitmap to PSD format or import a PSD file, the filter list does not show any import or export for Photoshop...what gives?
Corel Draw X5 version 15.20.686
Corel Draw Sign Designer
How can I import 3dxml file into Inventor format and how to export Inventor file to obj format?
View 3 Replies View RelatedIs it possible through the coordinated build a drawing in autocad?
eg
x | y
0-0
40-0
40-30
0-30
0-0
these coordinates are a rectangle 40 by 30 mm. Looking for some software, or even some command in autocad through which he coordinates draw the part.
On the drop down menu on my pse11 the import/export options are unselecteable, why this is and how it can be resolved as I would like to be able to import things.
View 1 Replies View Relatedhow to use auto cad for electrical designs for new architectural drawing for a new building project that will cover.
View 2 Replies View RelatedThere are no "initial view" options on PDF export.
View 4 Replies View RelatedACA2014. Need instructions on how to import a file into the Design Center.
View 3 Replies View Relatedqrcode-vcard 970pxpink.png
Customer wants QR code, but when I bring it in I get a white square?
We produce our own plasma cut sheet metal parts (up to 60 mm thick) for our manufactured machines. We have just installed a new machine that has a 24 station drilling/tapping head as well as the plasma head.
Our existing method automated of exporting the DXF shape files works great but I have a problem with drilled/tapped holes. I have configured the DXF output to put the external profiles on a named layer and done the same for internal profiles.
The problem arises with the DXF output of a drilled/tapped hole also being on the internal profile layer as the plasma machine see's any hole (drilled or not) as a plasma cut hole. I need to to be able to put drilled/tapped holes on a different layer but I don't want to have to do this manually (open DXF in Autocad, select and change drilled/tapped holes to another layer), save DXF file, as 80-90% of the parts we use on a machine are plasma cut 9no manual cutting).
So I'm putting it out there for the developers of Inventor to increase the DXF output layer options so that features (drilled/tapped holes, slots, etc..) can be put on a different layer to the inner and outer profiles.
Can Corel X5 import/accept/convert INDD (In Design Files? Can Version X6?
View 6 Replies View RelatedHow to set a default under options for export to PDF? I need to set the Vector resolution so it defaults to 720 DPI instead of 400 DPI.
Inventor Suite 2013 Ultimate
I have recently upgraded from corel 12 to X6. I work in SignLab e6 on my production computer. Now since I have upgraded when I export files from x6 and import them into SignLab e6 they will not import unless I change everything to 1 color. If it does export the file as full color, when I import the file it is converted to 1 color. This takes a lot of time to re color everything. I typically have to export files from Corel as .EPS in order for the file to import into Signlab with best quality, but have been using the CMX (legacy) lately with same results. I dont understand why I have to convert them into 1 color nor why they convert from full color to 1 color.
View 10 Replies View RelatedI am trying to activate factory design suite ultimate 2012 on a mac pc which is running on parallel desktop, but it give a error Reactivation Limit Reached.
View 2 Replies View RelatedI use X5 for creating files that can be read by a laser cutter.To combine as much object as possible on the working area i have to import the DXF files and place them.
Now i would like to know if its possible to link a obeject in a DXF auto to that same object in a X5 design.So if it is changed in the DXF it is changed in the X5 as well.
I was unable to configure a transfer from Factory Design Suite Group. This is more appropriate here.
Approx August, Inventor 2013 started to randomly crash.
Until then it was working fine.
Service packs & several re-installs have not cured it.
I cannot replicate the process.
I am lucky if I get 20 minutes of operation.
One day it actually ran all day. The next it crashed maybe 20 times.
Several projects have only needed 2D work which works fine but I have run out of time to postpone the Inventor projects.
I am trying to use the Inventor 2012's tube and pipe add on, but have all options related to it grayed out when I search for it. Is there something I need to install or a way to enable the add on for this?
View 2 Replies View RelatedI'm trying to use iLogic Design Copy to copy an assembly and all its associated parts to another directory. The assembly contains content center parts. Inventor warns me that the destination file of one of the CC parts (and 18 others) will be overwritten. When I go ahead and copy anyway, the copying process stops at that specific CC part. The Design Copy Progress dialog box states there is an error copying that CC part. When I close the Design Copy Progress dialog box, Inventor crashes.
The error copying the CC part: I'm allowed to use content center parts in iLogic Design Copied stuff, right? I searched some related topics and I'm under the impression that Inventor keeps the CC parts in its own directory and shouldn't be trying to overwrite them.
I have about 500 .dsf files (from iGrafxDesigner ... maybe 1999 version).I need to convert these to .svg. I would like to avoid having to write an import/export script, but I have done scripting for AutoCAD, Rhino3d, and Lightwave3d, so if necessary I could do it I suppose.
View 6 Replies View RelatedI saved correctly in the file .ipt the view representation of a very simple part.
One is the view form the top and the other one is the view from the bottom.
When I try to put these two different views into the drawing, the view is the same, and it depends what is selected on the right of the windows.
In a 3d model, say an ipt or iam file, it usually shows the design details in the browser.
These details tells that the way you created the sketches, features, planes, model, etc.
Are there any possibilities to remove the design details from the file?
I am not talking about the export formats (ie. STP, STL, SAT, etc) I ask this because I sometimes don't want to show details that how I created the models.
After setting the Application Options-File tab paths to our company standard and manually restarting IV the paths all revert to "%PUBLIC DOCUMENTS % default paths. Our IT guy is having the hardest time tracking down the root cause, Both users are on stand alone licenses.
1. Where does IV pick up these default file paths? Can I modify that .xml manually as a workaround?
2. How to identify the folders to look for that don't have adequate red-write permissions?
My company outputs IGES files and we always use the settings "Surfaces" and "144-Trimmed", however, the default for Sufrace Type is "143-Bounded" so we have to open up the options dialog box and change to "144-Trimmed" every time. How can I set Inventor's Default to "144-Trimmed" so I never have to mess with it again?
View 6 Replies View RelatedInventor Pro 2012.I am opening some SolidWorks 2011 SLDPRT files to make them into Inventor part files.The models come in fine. When I try to produce a IDW I can Dimension all the geometry but can not call out and holes/threads. I am using Win 7 64 bit, all the latest service packs for Inventor and Windows.
I have include a snipe screen of the Open file dialogue box and the selected options.
After finally getting X6 to be stable and usable I have two things I'd like to mention..
First, I've been using a 3rd party file manager called Ztree for years and one of its most wonderful capabilities is to copy paths to the clipboard which alleviates opening/saving frustrations with the typical Windoze Explorer dialogs. Anyway, one of the first problems I noticed with X6 is that Paste no longer works in the Open Drawing dialog, while it worked just fine in X5 and as far as I can remember, all previous versions. I sure would like to get that back.
My second complaint is the File/Export routine and specifically the presets. I do a lot of exporting to PNG and JPG and use multiple presets for fixed size/print resolution image output in both file formats. During the typical export session, I essentially export multiple different drawings all of which are exactly the same size/resolution in CD and in the past (X4 and prior as I recall,) was able to just hit <Enter> when the Export dialog appeared once the preset was set to the one I needed for that session.
In X6 though (and to some degree in X5,) even though the correct preset is listed, CD doesn't appear to recognize it, i.e., the math for the size/dpi conversion doesn't take place which forces me to waste time selecting "Original" or some other preset first, waiting for CD to render the new version, and THEN selecting the conversion preset that was pre-selected when I first opened the export dialog.
I am having problems with an error message relating to what appears to be a corrupted design data file. I am unable to save changes in my dwg to my design data file. I get this message:
Style library (C:UsersPublicDocumentsAutodeskInventor 2011Design Data) cannot be saved because it is damaged.If I attempt to copy a view in a dwg to another sheet or move it using the browser, I get the following error:
Paste View: problems encountered while executing this command.
Invalid XML value for 'SubstituteDisplayUnit'. Expected 'bool' received '44' in file:///C:/Users/Public/Documents/Autodesk/Inventor%202011/Design%20Data/PartsList.xml.
Invalid XML value for 'SubstituteFractionalFormat'. Expected 'bool' received '255' in file:///C:/Users/Public/Documents/Autodesk/Inventor%202011/Design%20Data/PartsList.xml.
I have also noticed that if I multi select components with ipropWiz5 and attempt to change the part name - it fails.I have tried reinstall in Inventor, ipropWiz5, etc. But to no avail.