AutoCAD Inventor :: Activating Factory Design Suite 2012
Apr 2, 2012I am trying to activate factory design suite ultimate 2012 on a mac pc which is running on parallel desktop, but it give a error Reactivation Limit Reached.
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Unable To Configure Transfer From Factory Design Suite Group?
Oct 8, 2012I was unable to configure a transfer from Factory Design Suite Group. This is more appropriate here.
Approx August, Inventor 2013 started to randomly crash.
Until then it was working fine.
Service packs & several re-installs have not cured it.
I cannot replicate the process.
I am lucky if I get 20 minutes of operation.
One day it actually ran all day. The next it crashed maybe 20 times.
Several projects have only needed 2D work which works fine but I have run out of time to postpone the Inventor projects.
AutoCAD Inventor :: Importing Factory Design User Assets
Apr 23, 2012Is there any way to import user defined factory assets within Inventor Factor Design? It would be nice to be able to import the assets created on my desktop directly to my user asset library on my laptop whithout having to go through the process of checking out all of the parts/assemblies and republishing them as user assets onto my laptop. I am the only on in the office currently using Factory Design, but the rest of the office will transition to Factory Design once we implement 2013. It would be nice if I had this figured out before that transition happens so the rest of the employees don't have to go through the process of republishing user assets to their own libraries.
View 1 Replies View RelatedAutoCAD Inventor :: Install Tube And Pipe In 2012 (product Design Suite Premium)?
Jun 4, 2013I am trying to use the Inventor 2012's tube and pipe add on, but have all options related to it grayed out when I search for it. Is there something I need to install or a way to enable the add on for this?
View 2 Replies View RelatedAutoCAD 2010 :: Cannot Create Deployment Building Design Suite 2012 Premium
Feb 10, 2012 I been trying to make a deployment of Autodesk Building Design Suite Premiun 2012 from
a pc with XP 32 Bit, XP 64 Bit, and Windows 7 64 Bit and the aplicaciton stars well but then after a couple minutes. I got this error.
Cannot create deployment - "The copy functions cannot be used D:x86RAC2012
AutoCAD Inventor :: Where Did Design View Representation Icon Go In 2012
Apr 29, 2011Where did the Design View Representation Icon go in 2012?
View 8 Replies View RelatedAutoCAD Inventor :: Design And Simulate Extension Spring (not Compression Spring) In 2012
Oct 30, 2013how to design and simulate a extension spring (not compression spring) in Autodesk Inventor 2012.
View 5 Replies View RelatedAutoCAD LT :: Activating Master LOD Freezes Inventor
Sep 20, 2013the activation is failed because the serial number i've enterred is not valid. i install AutiCAD LT on tha same computer with new Operating System(Win7)
View 1 Replies View RelatedAutoCAD Inventor :: Freezes And Stalls When Activating Master LOD
May 7, 2013I have a top level assembly which has more than 5000 components.
It was saved previously in a particular LOD.
Now i want the same assembly to be uploaded to the vault in turn which i should be reactivating the master LOD.
The moment I click activate the master LOD, inventor freezes and stalls for couple of hours.
my machione has a very decent configuration with 32GB ram memory.
AutoCAD Inventor :: Building Design Suite Ultimate - File Export / Import Options
May 4, 2013One of the common processes we have to do is to transilate file formats into a type we can use. Most the time it is for use in AutoCAD MEP...
Is there a good one-stop place to get info on import export options from / to softwares included in Autodesk Building Design Suite Ultimate?
AutoCAD Inventor :: Editing IProperties Of IPart Factory
Sep 19, 2012So I've spent a whole day creating a load of iParts... When testing them in assembly I realised I didn't fill in some iProperties that I was intending to on making the part factory (Vendor etc).
Now I can change an iProperty in the factor but it doesn't to seem to come through to generated parts when they are inserted into an assembly.
(without making the whole thing again...)
AutoCAD Inventor :: Generating Factory Part For Drawings
Feb 12, 2013I have a C-channel that I bent and then created a i-part of so that I could place both a formed and flat view in the drawing. After creating the drawing it was determined that the channel needed to be longer. Not a problem, open the factory, edit the part, open table and verify, close table and activate both parts, save and close factory. It's all good, until I run a print and the flat part (-02) of the factory still shows the old length. Next I open the factory, select table and both members and generate. The message " not able to save factory" appears.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
AutoCAD Inventor :: Add A New Member Row To IAssembly Factory Table
Feb 6, 2013I am trying to come up with an automatic method to add a new row to my i assembly table and populate that row based on values entered by the user (assuming that combination of values doesn't already exist... ). Basically, I wish to build my i assembly table on demand over long term by user input via a form that calls an ilogic rule.
View 1 Replies View RelatedAutoCAD Inventor :: IPart Members Reflect Changes To Factory
Aug 5, 2013We are facing a strange behaviour, since we switched from network folders to Vault 2011 Professional.
If we create a new revision of an iPart factory and make changes to that factory, members that are placed in assemblies already reflect the changes, although they have not been revisioned and re-generated. It seems like the member is already fetching the latests revision of the factory from Vault by default.
AutoCAD Inventor :: Default Factory Assets On 2D Layout
Aug 24, 2012Does Inventor give the ability to place default Factory Assets on a 2D factory layout? I know the Factory Design Suite has the ability to do this, but I don't need the Suite as I already own AutoCAD. All I need to be able to do is visualize a 3D factory layout such as in the following video for the Factory Design Suite:[URL].......
What software will accomplish this? And again, I wouldn't need the Suite, because I don't need any other feature than to insert 3D factory assets onto a 2D layout.
AutoCAD Inventor :: Insert A File As Overlay Into Factory
Aug 24, 2012I am trying to insert a AutoCad file as a Overlay into Factory.
The problem I'm having is the text in the Autocad file scales up and becomes a thick font.....I can't see or use the geometry under the text (text becomes a thick wall above with the geometry below.
The text seems to have a life of it's own..otherwise the geometry is fine. I know there are layer settings that can be turned on/off within factory.
I created a new file and stripped out the text from the AutoCad file to be able to use in Factory.
AutoCAD Inventor :: Failed To Save Factory Member (iPart)?
Mar 30, 2012I'm having trouble with iParts. This specific part is for a component that has many dimensions that vary from size to size, for a total of 23 configurations, 9 inch, and 14 metric. I did not have this problem until today... when trying to work with the iAssembly that uses two iParts (by means of selecting which Part Factory Member is used in each Assembly Factory Member).
I know that if the files are read-only, the files will fail to generate. I have checked this, was still having trouble, and so I deleted the files. The problem persists.
All the members compute successfully and there are no empty cells when editing the table. The filenames are just letters/numbers and dashes, no spaces.
The assemblies and parts had been generated and checked into vault, but only now problems exist, only for the newer parts, which happen to be the metric parts.
AutoCAD Inventor :: Adding New Factory Members To Legacy IPart
May 7, 2012We use Inventor 2012 and will most likely upgrade to 2013 between Christmas and New Year's, when our company traditionally shuts down for a week. I recently had occasion to edit an iPart for a hex head machine screw, originally modeled some years ago by someone who's no longer with the company, to add some sizes. As you'll see, the member names are Hex Head Machine Screws-001.ipt, Hex Head Machine Screws-002.ipt, etc. Why does the table go from Hex Head Machine Screws-002 to Hex Head Machine Screws-290, you ask? I'll get to that in a minute.
This iPart was modeled several Inventor versions ago, when the operator had no control over the iPart factory member names. When Inventor did start offering this control, I jumped right on it. In any iParts I modeled from there on out, I used the capabilities of MS-Excel to create abbreviated part descriptions for the iPart factory member names.
Last week I needed to go into this part and add some sizes. If I added the new sizes in sequence by thread size and screw length, they were going to slot in between the existing Hex Head Machine Screws-002 and Hex Head Machine Screws-003. The next unused number was 290, so I made the new factory members Hex Head Machine Screws-290 thru -296, as per the attached screen grab. Naturally the suffixes on the factory member names are out of sequence, and it isn’t very elegant.
As I see it, the other alternatives would have been:
1) Put the new sizes at the end of the list (worse, IMO).
2) Put the new sizes in sequence and renumber the factory members so they were sequential down the line. If I’d done this, then every factory member (say, Hex Head Machine Screws-011) after the newly added ones would have stood for a different size HHMS than it did before, which would have been really bad.
3) Rework the table so the existing names with numerical suffixes went away and were replaced by mnemonic names, as on my more recently modeled iParts. This would have resulted in assemblies looking for factory members under names that no longer existed, but it would have been possible to substitute the screws under their new names. I should mention that we are using the Vault, which makes matters easier.
I would have liked to take approach (3), but I was under some time pressure to finish an assembly using these fasteners.
AutoCAD Inventor :: Factory Asset - 2014 - No Drag / Drop
Nov 21, 2013Having issue in Inventor Pro 2014 with the factory layout/simulation add-on (factory design suite) where you can't drag and drop "out of the box" assets onto your factory floor?
When I drag/drop onto the factory floor, nothing happens and no message appears..
AutoCad :: Open The 2012 Design Center
Aug 19, 2013How do I open the Design Centre and see "blocks" that are bound xref with $0$ in the name, unless the bindtype is set to insert.
I'm not a monster, I just look like one.
AutoCAD Civil 3D :: Open Design Cad Files In Vrs 2012?
Dec 17, 2013Is there any way to open or convert Design Cadd files to be useable in vrs 2012 ?
View 4 Replies View RelatedAutoCAD Inventor :: IPart Factory Table On Drawing Show Equation Not Value For Parameters
Oct 21, 2008I have an iPart that I have created parameters to perform some basic calcs so the values will show up on every member. The parameters are correct for the different member so it appears to be working correctly on the model side. For example I have a parameter called 'CutLength' that performs simple math functions. But when I make the table on the drawing and I include this parameter, I see the formula in the table instead of the value. Is there a way I can have it display the value instead of the equation?
View 2 Replies View RelatedAutoCAD Civil 3D :: Raster Design Not Working With 2012 After Update 2.1
Aug 23, 2012After installing Update 2.1 for Civil 3D, Raster doesn't seem to be working. When I go to use a Raster function, I get
FATAL ERROR: Unhandled Access Violation Reading 0x01b8 Exception at 6e545df5h.
I've tried repairing and re-installing Raster and nothing has changed.
AutoCAD Inventor :: Turn Off Active Factory Member Option When Placing A Drawing View?
Feb 20, 2013I create a drawing of an iPart, while doing so I have the iPart model open in the background. When placing a view on the drawing the active factory member is the default option, I have a bad memory so forget to tell Inventor that actually I would like to use a specific iPart member in this particular drawing view. I then spend a long time laying out and dimensioning the drawing. When complete, I create a second sheet and copy all information from sheet 1 onto sheet 2. I then double click on the main drawing view and change the model state to an alternative factory member. At this point I realise that the drawing on sheet one is based on the active factory member and start swearing.
The result of changing to a different member when the existing drawing is based on the active member is that ALL DIMENSIONS DISSAPEAR FROM THE DRAWING AND HAVE TO BE PAINSTAKINGLY REPLACED. At this point I will usually REDRAW SHEET 1 so that further sheets can be created quickly in the future by selecting an alternative factory member.
can I change the software defaults somewhere in the setup to prevent the 'active factory member' being displayed as an option in the first place?
AutoCAD Inventor :: Properties Browser Settings - Modifying Parameter Keys In Factory Layout
May 16, 2012Where the properties browser settings are located so that I can turn the browser on for modifying parameter keys in factory layout? I actually had turned this browser on before, but now I cannot remember where they were. Please see the attachment for further info.
View 9 Replies View RelatedAutoCAD Inventor :: Importing Design With A Design?
Oct 9, 2013I wanted to use the program to design a robot for our school vex competition. Vex has provided cad files for all the parts. So, how i can import the seperate parts into one design. I can only open each part individually but cant find a way to combine them so can assemble the robot in one design.
View 2 Replies View Related3ds Max :: Design 2012 - Error Creating BMP
Jun 28, 2011When i am using 3dsmax design 2012, it always display "error creating BMP" after click RENDER button. I must reduce the resolution so that i can render. How can I solve that ? Is it related to RAM or Display card ?
Spec of Computer
AMD X4 975
2 GB RAM
HD5670 1GB
WINDOWS XP 32bit
AutoCAD Inventor :: Copied By Design Assistant Assembly Cannot Be Altered In Design Assistant
Apr 10, 2012I just made a copy of assembly in Design Assistant.I opened the copied assembly in Design Assistant to make some changes.Parts are accessible but I have only "Clear" option possible. URL....
View 2 Replies View RelatedAutoCAD Civil 3D :: Install Infrastructure Design Suite Premium 2014
Jun 25, 2013The installation of IDSP has been an adventure. After a few rough starts Autodesk support team got us through the installation of 2 computers. Now I am attempting to install IDSP on my computer and have run into a number of errors that between this forum and Autodesk support I have worked through.
I start the install once again and looked like everything was installing ok.
That is until I get an message "Allied product is not found" and the install fails and removes all installations up to this point. The failure happened while installing the Civil 3D Language Pack.
Install log states:
2013/6/24:15:51:11 Administrator ______ Allied product is not found2013/6/24:15:51:35 Administrator ______ Install Autodesk AutoCAD® Civil 3D® 2014 Language Pack Failed Installation aborted, Result=1603
AutoCAD 2013 :: Activating The Online Tab In Ribbon
Apr 17, 2013When I installed AutoCAD 2013 in our labs here at Joliet Junior College I must have selected (or deselected rather) some of the components that enable the online Autodesk 360 features. When I look in our OPTIONS dialog box I do not have the ONLINE tab and ALL items/panels in the ONLINE Tab of the Ribbon are grayed out and disabled?
How do I go about patching/repairing the workstations to we can access the online settings and features?
AutoCAD 2013 :: Activating Units Command
Aug 20, 2013After installation of the AutoCAD 14 and setting up drawing parameters to support the .dwt template, from the Format menu, tried initiating the units, points, table style, and layer states command but get a prompt for indicating for example: "units" unknown command, "DDTYPE" unknown comand, etc.. What setting do I have to adjust in order for these commands to work?
View 4 Replies View Related