So I've spent a whole day creating a load of iParts... When testing them in assembly I realised I didn't fill in some iProperties that I was intending to on making the part factory (Vendor etc).
Now I can change an iProperty in the factor but it doesn't to seem to come through to generated parts when they are inserted into an assembly.
(without making the whole thing again...)
We are facing a strange behaviour, since we switched from network folders to Vault 2011 Professional.
If we create a new revision of an iPart factory and make changes to that factory, members that are placed in assemblies already reflect the changes, although they have not been revisioned and re-generated. It seems like the member is already fetching the latests revision of the factory from Vault by default.
I'm having trouble with iParts. This specific part is for a component that has many dimensions that vary from size to size, for a total of 23 configurations, 9 inch, and 14 metric. I did not have this problem until today... when trying to work with the iAssembly that uses two iParts (by means of selecting which Part Factory Member is used in each Assembly Factory Member).
I know that if the files are read-only, the files will fail to generate. I have checked this, was still having trouble, and so I deleted the files. The problem persists.
All the members compute successfully and there are no empty cells when editing the table. The filenames are just letters/numbers and dashes, no spaces.
The assemblies and parts had been generated and checked into vault, but only now problems exist, only for the newer parts, which happen to be the metric parts.
We use Inventor 2012 and will most likely upgrade to 2013 between Christmas and New Year's, when our company traditionally shuts down for a week. I recently had occasion to edit an iPart for a hex head machine screw, originally modeled some years ago by someone who's no longer with the company, to add some sizes. As you'll see, the member names are Hex Head Machine Screws-001.ipt, Hex Head Machine Screws-002.ipt, etc. Why does the table go from Hex Head Machine Screws-002 to Hex Head Machine Screws-290, you ask? I'll get to that in a minute.
This iPart was modeled several Inventor versions ago, when the operator had no control over the iPart factory member names. When Inventor did start offering this control, I jumped right on it. In any iParts I modeled from there on out, I used the capabilities of MS-Excel to create abbreviated part descriptions for the iPart factory member names.
Last week I needed to go into this part and add some sizes. If I added the new sizes in sequence by thread size and screw length, they were going to slot in between the existing Hex Head Machine Screws-002 and Hex Head Machine Screws-003. The next unused number was 290, so I made the new factory members Hex Head Machine Screws-290 thru -296, as per the attached screen grab. Naturally the suffixes on the factory member names are out of sequence, and it isn’t very elegant.
As I see it, the other alternatives would have been:
1) Put the new sizes at the end of the list (worse, IMO).
2) Put the new sizes in sequence and renumber the factory members so they were sequential down the line. If I’d done this, then every factory member (say, Hex Head Machine Screws-011) after the newly added ones would have stood for a different size HHMS than it did before, which would have been really bad.
3) Rework the table so the existing names with numerical suffixes went away and were replaced by mnemonic names, as on my more recently modeled iParts. This would have resulted in assemblies looking for factory members under names that no longer existed, but it would have been possible to substitute the screws under their new names. I should mention that we are using the Vault, which makes matters easier.
I would have liked to take approach (3), but I was under some time pressure to finish an assembly using these fasteners.
I have an iPart that I have created parameters to perform some basic calcs so the values will show up on every member. The parameters are correct for the different member so it appears to be working correctly on the model side. For example I have a parameter called 'CutLength' that performs simple math functions. But when I make the table on the drawing and I include this parameter, I see the formula in the table instead of the value. Is there a way I can have it display the value instead of the equation?
View 2 Replies View RelatedI was looking for some iLogic Code for Inventor 2013 that would cycle through all the parts in an assembly grabbing the quantity of each part and setting it equal to the custom property "Qty" of each part.
Having a little trouble creating the for each loop and setting reference to each part without referencing each part by specific name.
I have a C-channel that I bent and then created a i-part of so that I could place both a formed and flat view in the drawing. After creating the drawing it was determined that the channel needed to be longer. Not a problem, open the factory, edit the part, open table and verify, close table and activate both parts, save and close factory. It's all good, until I run a print and the flat part (-02) of the factory still shows the old length. Next I open the factory, select table and both members and generate. The message " not able to save factory" appears.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
I am trying to come up with an automatic method to add a new row to my i assembly table and populate that row based on values entered by the user (assuming that combination of values doesn't already exist... ). Basically, I wish to build my i assembly table on demand over long term by user input via a form that calls an ilogic rule.
View 1 Replies View RelatedDoes Inventor give the ability to place default Factory Assets on a 2D factory layout? I know the Factory Design Suite has the ability to do this, but I don't need the Suite as I already own AutoCAD. All I need to be able to do is visualize a 3D factory layout such as in the following video for the Factory Design Suite:[URL].......
What software will accomplish this? And again, I wouldn't need the Suite, because I don't need any other feature than to insert 3D factory assets onto a 2D layout.
I am trying to insert a AutoCad file as a Overlay into Factory.
The problem I'm having is the text in the Autocad file scales up and becomes a thick font.....I can't see or use the geometry under the text (text becomes a thick wall above with the geometry below.
The text seems to have a life of it's own..otherwise the geometry is fine. I know there are layer settings that can be turned on/off within factory.
I created a new file and stripped out the text from the AutoCad file to be able to use in Factory.
Is there any way to import user defined factory assets within Inventor Factor Design? It would be nice to be able to import the assets created on my desktop directly to my user asset library on my laptop whithout having to go through the process of checking out all of the parts/assemblies and republishing them as user assets onto my laptop. I am the only on in the office currently using Factory Design, but the rest of the office will transition to Factory Design once we implement 2013. It would be nice if I had this figured out before that transition happens so the rest of the employees don't have to go through the process of republishing user assets to their own libraries.
View 1 Replies View RelatedI am trying to activate factory design suite ultimate 2012 on a mac pc which is running on parallel desktop, but it give a error Reactivation Limit Reached.
View 2 Replies View RelatedHaving issue in Inventor Pro 2014 with the factory layout/simulation add-on (factory design suite) where you can't drag and drop "out of the box" assets onto your factory floor?
When I drag/drop onto the factory floor, nothing happens and no message appears..
I was unable to configure a transfer from Factory Design Suite Group. This is more appropriate here.
Approx August, Inventor 2013 started to randomly crash.
Until then it was working fine.
Service packs & several re-installs have not cured it.
I cannot replicate the process.
I am lucky if I get 20 minutes of operation.
One day it actually ran all day. The next it crashed maybe 20 times.
Several projects have only needed 2D work which works fine but I have run out of time to postpone the Inventor projects.
I create a drawing of an iPart, while doing so I have the iPart model open in the background. When placing a view on the drawing the active factory member is the default option, I have a bad memory so forget to tell Inventor that actually I would like to use a specific iPart member in this particular drawing view. I then spend a long time laying out and dimensioning the drawing. When complete, I create a second sheet and copy all information from sheet 1 onto sheet 2. I then double click on the main drawing view and change the model state to an alternative factory member. At this point I realise that the drawing on sheet one is based on the active factory member and start swearing.
The result of changing to a different member when the existing drawing is based on the active member is that ALL DIMENSIONS DISSAPEAR FROM THE DRAWING AND HAVE TO BE PAINSTAKINGLY REPLACED. At this point I will usually REDRAW SHEET 1 so that further sheets can be created quickly in the future by selecting an alternative factory member.
can I change the software defaults somewhere in the setup to prevent the 'active factory member' being displayed as an option in the first place?
Where the properties browser settings are located so that I can turn the browser on for modifying parameter keys in factory layout? I actually had turned this browser on before, but now I cannot remember where they were. Please see the attachment for further info.
View 9 Replies View RelatedI want to make popup the i properties windows to fill or change in 2 ways:
» when creating a new ipt, iam and idw
» just before saving all 3
the properties I want to validate are
- the title not filled
- if there is more than one line filled in comments
I am opening, using VBA, the iProperties "Pop Up" box, using the following code....
ThisApplication.CommandManager.ControlDefinitions.Item("AppiPropertiesWrapperCmd").Execute
If it is possible to open the iProperties "Pop Up" box at a specific Tab, for example, "Physical" or "Status" etc?
Is there any way to add an "iProperties" item to the context menu in the drawing environment, so that I can select a part on the drawing and access its iProperties, instead of having to "Open, edit iProp, Close," for each individual part? - Using Autodesk Inventor Professional 2012
View 2 Replies View RelatedAny way of having 2 files with different file name but identical designs what automatic updates the other one?
I need the same valve design with different materials, stock number and part names but I would like to make sure that both files are always updated to latest rev. Without having to remember to do it my self every time.
We are using vault?
Is it possible to create a new TAB in the standard iProperties dialogue box for Inventor Models and Drawings? I want a completely new TAB to hold unique company information fields without having to create Custom Property fields.
View 2 Replies View RelatedWhile in assembly, i would like to select a subpart and be able to clear or delete the value of ex description without opening the part file.
I can delete properties in custom prop but i cant do it in description....
I've use design tracking properties but to no avail....
In the past we filled in our changes, we did on the part, in the iProperties of the IDW. In the IDW we use some Custom iProperties for this. That's not usefull because you want this data in the 3D-model. Now I have written some code to automate this, which works really great. This code works in the IPT as well as the IDW. But what I want to achieve is: When my IPT is the active document, I want to read out the iProperties from the IDW to check if there is already filled some of these properties, because I have to deal with 'old' documents as well.
So my basis question is: How can I read out iProperties from an IDW into the IPT. I have found lots of solutions which go the opposite direction, IPT -> IDW. I want IDW -> IPT.
I want to get out the Area in Physical Tab in i Properties, after that, I will show it out in drawing by add general notes
This is my program:
[code]
.....................
Dim oBlockPart As PartDocument
oBlockPart = mApp.ActiveEditDocument
..................
Dim oGeneralNotes As GeneralNotes
I need to add a "Gauge" value to show up in the iProperties dialog box under the Project tab, but I don't know how or if I can.
View 9 Replies View RelatedI am now looking to work with custom iProperties that will populate our company's new BOM standard. I have not done much with regards to customizing a BOM (I've always used the generic fields). Now my boss has come to me and wants to use the following headings for our BOM....
REF ID, QTY. , DESCRIPTION, SHAPE, SIZE, LENGTH, MASS, TOTAL LENGTH, TOTAL MASS, COMMENTS, REF. DWG.
REV., REV. DATE
While I understand some of these fields will require the user to manually type information in (Comments and Ref. Dwg.) The others, from my understanding, can come straight from iProperties or Parameters. I am running INV Pro 2013.
i would like to be able to make a change in iProperties ( part #, description, stock number), and then automate/sync that change to the .idw of that part/project after the .idw is created.
is this possible? do i just need to fill out the iProperties BEFORE i make the .idw,
I really hope this is possible, we are going back and reorganizing all of our previous work and putting everything in vault now.
Sometimes I change the dimensions of a material I use but then I have to open Iproperties and change the description by hand. This can create problems as you can understand especially when I forget to update the Iproperties.
Then I had the thought to automate it. Lets take a steel bar as example. I have thickness and width as parameter, both are exported and available under IProperties/Custom. But they show as 200 mm and 10 mm. I would like to loose the units. I tried also UL but then it reads 200 ul and 10 ul.
What I like to get are just the numbers, no units. I like to use it to create this "steel bar 200x10" where the 200 and the 10 are linked to the Parameter and will change when I change the dimensions av the steel bar.
How can I get the "Location" iProperty using Inventors VBA?
Please see the attached picture!
I am using the following code to get other iProperties, thus.....
Set oStockNumberProperty = oCompDef.Document.PropertySets.Item("Design Tracking Properties").Item("Stock Number")
StockNumber = Trim(oStockNumberProperty.Value)
This works OK.
I would like to copy and paste all iproperties from one part to another, without retyping it all.
What i was thinking about is:
1. Exporting all iproperties to .txt
2. Run a import .txt rule to iproperties.
Is it possible? If so, How could i accomplish a task such as this?
Privacy warning: Since I live in a country that has traded liberty for the illusion of security, all of your posts to me are being monitored and saved by the United States Government.
I am trying to figure out if it is possible to change the iProperties default field names. For example, in iProperties, under the Project tab, i want to change the field "Stock Number" to "Drawing Number". I know that i could create my own custom field in a seperate tab, but i think this way would have a much cleaner look and simpler workflow. If it is possible, is it something that i can incorporate into an ipt template? Or will this only change on my system?
I am working in Inventor 2012 Pro