Inventor Pro 2012.I am opening some SolidWorks 2011 SLDPRT files to make them into Inventor part files.The models come in fine. When I try to produce a IDW I can Dimension all the geometry but can not call out and holes/threads. I am using Win 7 64 bit, all the latest service packs for Inventor and Windows.
I have include a snipe screen of the Open file dialogue box and the selected options.
I have two PC's side-by-side, running the same version of CS6. On one PC, I can see my Libraries from the "save as" and "open" dialogue boxes and on the other I have can't have have to dig down to find the folders I want to save to. I don't have any plug-ins installed, and I have not edited the registry.
View 2 Replies View RelatedWhen I change the column headings e.g. date, tag size etc., on the OPEN FILE box, they revert to the unchanged headings after toe box is closed.
Is there a method of keeping them as I want them ?
Suddenly today my open dialogue box has reverted to an old-fashioned looking small thing about 7" x 4 1/2" which only shows 7 files at a time. Always before I got a nice big Windows Explorer style box nearly filing the screen. I'm running Windows 7 and Inventor 2011. Is there a switch somewhere to revert to the 'old' type box and that's got switched somehow?
View 4 Replies View RelatedRunning X4 under Win7 and it always goes back to the last file I was working on when I go to the Open dialogue. It insists on going to the Libraries Directory on my C: drive and 99% of my files are stored on my H: drive. Sometimes it's easy to get out of, other times I can't back up at all. Is there someway to gte the Open dialogue to simply go to My Computer instead?
View 3 Replies View RelatedWindows 7 64 bit user.
Upgraded to 2.8 with total deletion of the Gimp folder to try to address this.
File / Open Recent works fine.
File / New etc same all good...
File / Open has a problem.
Once that window opens the product is hung.
There is no window to type the file name in, and I cannot click on any of the disk drive names.
I must admit that I have a good number of network and usb as well as physical drives. I do not think that any have changed names, but it seems clear that something like a path change is responsible?
How to repair a stuck File/Open dialogue.
I have PS CS5 64 bit running on a PC, Win 7.
Everything has been working fine but I have recently installed two new extension panels - Fundy Image Brander and Tych Panel. When either of these scripts require you to input a file to open via the Open File dialogue box, everything hangs for 2-3 minutes. The mouse and keyboard do not lock and you can open up other windows which work fine. The open file dialogue just hangs (not just on selecting an individual image but selecting a drive or folder). If you call up the Task Manager and End Photoshop as a task a dialogue box pops up with the message "The system cannot end this program because it is waiting for a response from you."
Photoshop otherwise works well. It's just when the extension panel requires you to input a file to open.
Is there a list of possible options for Apprentice with the Open with Options method?
Even if the Apprentice.open call is inside of a Try Catch, it doesn't throw an error when a file is missing references it just goes back to the routine that called it.
Dim oDocOpenOptions As NameValueMapoDocOpenOptions = oApprenticeApp.TransientObjects.CreateNameValueMapCall oDocOpenOptions.Add("SkipAllUnresolvedFiles", True)
I can't get the Tool Options dialogue box to re-dock to the toolbar. I've looked at a few other threads, but they haven't worked. I'll attach screencaps if I need to.
View 6 Replies View RelatedIs it possible to put as part of an action 'open the file that's selected in the file browser'. At the moment I select files and then run a batch process, or open the file and then run an action, but can I skip that stage?
What I have in mind is being able to look over the file browser to see which action each file needs to have run, but to be able to just click an action button and for it to open that file and run the action, etc.
Size of page differs in page size dialogue box to that listed in print options box. I changed computers and it works correctly in the second one in that the page size is the same in both boxes, but I still cannot get it to work in the original pc. Both the file and the printer are common. Reinstalling Xara does not work. It looks like it is not installing correctly, even though it appears to be.
View 1 Replies View RelatedAfter setting the Application Options-File tab paths to our company standard and manually restarting IV the paths all revert to "%PUBLIC DOCUMENTS % default paths. Our IT guy is having the hardest time tracking down the root cause, Both users are on stand alone licenses.
1. Where does IV pick up these default file paths? Can I modify that .xml manually as a workaround?
2. How to identify the folders to look for that don't have adequate red-write permissions?
My company outputs IGES files and we always use the settings "Surfaces" and "144-Trimmed", however, the default for Sufrace Type is "143-Bounded" so we have to open up the options dialog box and change to "144-Trimmed" every time. How can I set Inventor's Default to "144-Trimmed" so I never have to mess with it again?
View 6 Replies View RelatedI have the student version of AutoCAD 2012 on an HP laptop with Windows 7 Home Premium OS. I originally installed AutoCAD in June of 2012. It worked fine for 9 or 10 months but now whenever I select File/Open, File/Save, or File/Save As, AutoCAD stops responding and the spinning blue donut appears. AutoCAD never comes back and I have to close it from Task Manager. I uninstalled AutoCAD and reinstalled it, and the process went smoothly. However I still have exactly the same problem with the File operations. I apply Windows updates, but other than that have not made any changes to the software on the laptop. AutoCAD works fine for everything except the File operations. I am able to save with CTL/S and am able to open AutoCAD files from File Manager.
View 3 Replies View Relatedis it possible to Zoom and Pan whilst I have a title box open.I work for a company that has installed its own toolbar and and attribute box's to be filled out. My issue is that I need to zoom into various parts of the drawing to be able to fill out all the boxes.
Currently I have to close the dialogue box down every time I want to move the drawing to a specific area.If there was a command or setting that I could use to be able to keep the box open and move the drawing at the same time.
if i try and to open a new file or save as a current file, the windows box does not open. the command line does populate asking for file name, etc, but obviously is very tedious to navigate windows folders with a command line!
any obvious changes that would prevent windows folder dialogue box not to open?
I'm looking to get the file path of a selected part/assembly while inside of an assembly. I think I found something that can get it but the example is just different enough I can't figure it out and I don't have time to play with it. There also might be an easier way I couldn't find while searching.
This is the example code that seems to be able to do loads of things including get the full path, if you know what you're doing.
[URL]
is it possible to Zoom and Pan whilst I have a title box open.
I work for a company that has installed its own toolbar and and attribute box's to be filled out.
My issue is that I need to zoom into various parts of the drawing to be able to fill out all the boxes.
Currently I have to close the dialogue box down every time I want to move the drawing to a specific are.
If there was a command or setting that I could use to be able to keep the box open and move the drawing at the same time that would be great.
When ever I open a drawing from the file menu or open file icon, the preview pane is missing from the dialogue box. I is there if i use file new or when I insert a block of file. Please see attached screen print.
Acad LT2013
One of the common processes we have to do is to transilate file formats into a type we can use. Most the time it is for use in AutoCAD MEP...
Is there a good one-stop place to get info on import export options from / to softwares included in Autodesk Building Design Suite Ultimate?
Photoshop CC The 3D Menu is greyed out so no options are able to be selected. If I try to use the 3D Window (Window>3D) then I get a message about enabling "Use Graphic Processor" even though its already enabled. I wanted to try out CC before upgrading for CS6 - And certainly will not be buying a new system just for 3D Option in CC (will stick with CS6)
System InfoAdobe Photoshop Version: 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: AMD CPU Family:15, Model:1, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2, SSE3
[code]...
I recently started having a problem with the 'Merge to HDR Pro' process in photoshop CS5.
Recently, however, I have been unable to generate 32 bit images from the 'Merge to HDR Pro' process.
When I begin the process and select my files, the dialogue box I should see pop open to select 32 bit, 16 bit, etc. output options, does not open. Photoshop launches directly into the merge process, aligns the source photos, transforms, etc., and finally outputs a 16 bit image, which is opened in photoshop as if I had opened it from a source folder.
At no point in the process is the histogram of the new HDR photo displayed. I am unable to find any HDR preference pages where I could possibly change settings.
I was wondering if there was an option to set Inventor to display the full file path for the current file open ? At present I am only seeing a short description of the name of the active file - I wish to see it's full file path similar to what AutoCAD displays.
Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
is possible to retrieve the information of the reference in the iam file without open the file in session ? Opening with notepad the iam file, at the end of file, the references is contains in the planar text.
Is possible to retrieve documentation for this request ?
if i need to rename or change anything in the iproperties of ipt, im doing it from the vault.my problem is that, when i change something in iproperties of an ipt thru vault, i have to open the idw to update it.
as most of the iproperties in ipt shows in the idw.
its easy to change the properties in vault. but its deleting its purpose if i have to each idw to make sure i have the updated idw.is there a code where i can open all idw and save the same file and checking to the vault automatically?
The dialogue box for Uniform Fill is not opening.
So I am posting a video here: [URL]
1. I prepared a 57 mm square, proportionally resized it to 58 mm and applied enter for the change but it remained as is i.e. 57 mm sq. Next I made the same changes through property bar, it worked. Through further experiments I observed it only make transformations through enter if we give x=val and move to y=val through tab and press enter. Or if we directly give new value to y and press enter. The property bar doesn't has this problem.
2. Transformations dockers problem of showing wrong position on y-axis. Screen shot attached.
3. Open and Import dialogue boxes don’t get cancelled as we hit ESC key. This problem remains as is from v16.0.0.707.
4. Printing - EPS with CMYK / Native colour management shows graying problem on RIP. Facing it as a major problem.
Problems encountered even after resetting through pressing F8 at startup.
This is the second time in a week this has happened. Was able to repair it the first time by changing the name MediaDatabase.db3 to MediaDatabase.old
View 1 Replies View RelatedWhen I attempt to load xref the dialogue for file attachment does not appear. This has only started happening the past day or so. The same applies to image files etc.
View 2 Replies View RelatedIs it possible to create a new TAB in the standard iProperties dialogue box for Inventor Models and Drawings? I want a completely new TAB to hold unique company information fields without having to create Custom Property fields.
View 2 Replies View Related