CorelDRAW X6 :: Open And Import Dialogue Boxes Don’t Get Cancelled
Sep 4, 2012
1. I prepared a 57 mm square, proportionally resized it to 58 mm and applied enter for the change but it remained as is i.e. 57 mm sq. Next I made the same changes through property bar, it worked. Through further experiments I observed it only make transformations through enter if we give x=val and move to y=val through tab and press enter. Or if we directly give new value to y and press enter. The property bar doesn't has this problem.
2. Transformations dockers problem of showing wrong position on y-axis. Screen shot attached.
3. Open and Import dialogue boxes don’t get cancelled as we hit ESC key. This problem remains as is from v16.0.0.707.
4. Printing - EPS with CMYK / Native colour management shows graying problem on RIP. Facing it as a major problem.
Problems encountered even after resetting through pressing F8 at startup.
Running X4 under Win7 and it always goes back to the last file I was working on when I go to the Open dialogue. It insists on going to the Libraries Directory on my C: drive and 99% of my files are stored on my H: drive. Sometimes it's easy to get out of, other times I can't back up at all. Is there someway to gte the Open dialogue to simply go to My Computer instead?
I have purchased a large monitor and would like to reduce the size of the text in the dialogue boxes, i.e. Project Browser, etc. Can this be done?, and if so how. The same goes for the Panel button.
I thought standard Windows behavior is that when I re-size a dialogue box that next time the box is activated, it remembers the size it was when I last used it.
Just the other day I switched from Windows XP, AutoCAD 2010 (with ProSteel) to Windows 7 (64bit), AutoCAD 2012 (with same version of ProSteel).
Since then I have been noticing that a specific ProSteel dialogue box (Shape/Plate Properties) always resets to it default display. Those of you familiar with ProSteel may know that the Shape/Plate Properties dialogue box has a bunch of expandable tabs/pages on the left hand side, generally speaking I would always like all of these tabs to be expanded each time I open this dialogue box. This has alway been how the 2 previous versions of ProSteel have behaved in the past, until now.
Every time I open this particular dialogue box, all the tabs/pages on the left of the dialogue box are contracted, and must be expanded if I am to access them.
Sounds like a small issue, but it is proving to have quite a large impact... with the amount of times I enter and exit this dialogue box.
I've got an SVG file, it was generated by a program which generates such things, its completely valid according to the W3C validator. If I try to open it or import it into Corel X5, X5 crashes. I send off a WER to Corel hopefully (it says it sends it but one never knows for sure.)
My system Win XP (32 bit, SP3), 3.5GB of RAM, 500+GB free hard drive space..Corel X5 - I am pretty sure it has SP2 applied it calls it self 10.2.0.661 in the About menu.
When I open or import a DWG into CorelDraw X6 it changes the colors (see image).
I tried changing the Color Management Settings to Minimal Color Management which is suppose to preserve the original color when opening, importing, and pasting, but that doesn't work.
using lightroom 4.3... when I import photos, they appear in random order in the IMPORT viewing window. With pervious versions of lightroom, they were always in order of file name. It becomes more time consuming to select specific files to import to a file if there are 2 or more jobs on one CF card ( I have photos of my kids skiing mixed up with a portrait session.). Is there a way to sort the photos (by file name, or time) before import? I do know how to sort post import.
I've received floorplans from a client in PDF format. When I import or open the PDF, all of the outlines are coming in with a transparency applied to them (see attached png). I can't work with the file like this because DRAW is just choking. There are thousands of these lines and I can't figure a way to remove the transparency from all the outlines.
I have LR 3.6 and have created a catalog of pictures from a ski trip I took last year. All of these pictures and the LR catalog are in one folder on my hard drive. After sorting, deleting and retouching quite a few pictures I now notice that one picture is missing from the library. If I open the folder in Explorer (Win 7) I can see the picture, and Windows Picture & Fax Viewer will open/display this picture so it appears the file itself is fine.
However, I cannot get this picture into the library for some reason. When I choose File>Import Photos this one picture doesn't show up in the list of photos. It's as if Lightroom can't see this picture for some reason.
Oh, and I don't know if it matters, but there is a movie clip with the same filename but a different extension (obviously) that does show up in the library and the import dialogue. The picture filename is DSC_0001.jpg, the movie filename is DSC_0001.mov.
When the import dialogue box is open in Premiere Pro CC, I sometimes need to use the search box in the upper right-hand corner of the dialogue box. The system will allow me to enter a search term, but it will not do the search. I'm using Windows 8.1 64 bit. Are others experiencing the same problem?
I recently started having a problem with the 'Merge to HDR Pro' process in photoshop CS5.
Recently, however, I have been unable to generate 32 bit images from the 'Merge to HDR Pro' process.
When I begin the process and select my files, the dialogue box I should see pop open to select 32 bit, 16 bit, etc. output options, does not open. Photoshop launches directly into the merge process, aligns the source photos, transforms, etc., and finally outputs a 16 bit image, which is opened in photoshop as if I had opened it from a source folder.
At no point in the process is the histogram of the new HDR photo displayed. I am unable to find any HDR preference pages where I could possibly change settings.
My LR 5 is as slow as a snail generating those previews.
Importing my RAWs form the EOS 6D (saved on a 95MB/s 32 BG SanDisk Extreme Pro) it renders only the 12 or 24 displayed previews and leaves out the rest (the next only when I'm scrolling down). For 12 images LR5 needs 8-10 seconds. LR4.4 does the same process for all 150 RAWs in 1-2 seconds.
It doesn't matter if I want to import to my workstation (Dell Precision T1650, 8core Intel Xeon E3-1240 V2, 16GB RAM, 64bit) via USB 3.0 (Reader & Port) or to my laptop (Dell Latitude E6400). So it must be LR, not my hardware.
Are there known issues with the Canon-RAW format? I just updated EOS firmware to 1.1.3, but the renderspeed stays the same. For 1 image 3-4 seconds single...
I have unchecked the box for "Show import dialogue when memory card is attached" in LR 4 and checked it in LR 5, but LR 4 is still opending every time when I insert a card in my card reader.
Suddenly today my open dialogue box has reverted to an old-fashioned looking small thing about 7" x 4 1/2" which only shows 7 files at a time. Always before I got a nice big Windows Explorer style box nearly filing the screen. I'm running Windows 7 and Inventor 2011. Is there a switch somewhere to revert to the 'old' type box and that's got switched somehow?
is it possible to Zoom and Pan whilst I have a title box open.I work for a company that has installed its own toolbar and and attribute box's to be filled out. My issue is that I need to zoom into various parts of the drawing to be able to fill out all the boxes.
Currently I have to close the dialogue box down every time I want to move the drawing to a specific area.If there was a command or setting that I could use to be able to keep the box open and move the drawing at the same time.
if i try and to open a new file or save as a current file, the windows box does not open. the command line does populate asking for file name, etc, but obviously is very tedious to navigate windows folders with a command line!
any obvious changes that would prevent windows folder dialogue box not to open?
Upgraded to 2.8 with total deletion of the Gimp folder to try to address this.
File / Open Recent works fine.
File / New etc same all good...
File / Open has a problem.
Once that window opens the product is hung.
There is no window to type the file name in, and I cannot click on any of the disk drive names.
I must admit that I have a good number of network and usb as well as physical drives. I do not think that any have changed names, but it seems clear that something like a path change is responsible?
Everything has been working fine but I have recently installed two new extension panels - Fundy Image Brander and Tych Panel. When either of these scripts require you to input a file to open via the Open File dialogue box, everything hangs for 2-3 minutes. The mouse and keyboard do not lock and you can open up other windows which work fine. The open file dialogue just hangs (not just on selecting an individual image but selecting a drive or folder). If you call up the Task Manager and End Photoshop as a task a dialogue box pops up with the message "The system cannot end this program because it is waiting for a response from you."
Photoshop otherwise works well. It's just when the extension panel requires you to input a file to open.
Inventor Pro 2012.I am opening some SolidWorks 2011 SLDPRT files to make them into Inventor part files.The models come in fine. When I try to produce a IDW I can Dimension all the geometry but can not call out and holes/threads. I am using Win 7 64 bit, all the latest service packs for Inventor and Windows.
I have include a snipe screen of the Open file dialogue box and the selected options.
When ever I open a drawing from the file menu or open file icon, the preview pane is missing from the dialogue box. I is there if i use file new or when I insert a block of file. Please see attached screen print.
I'm having a problem throught CS6 with the Open, Save, or Save As dialog boxes not opening for a period of time after clicking on the desired functions. It can take over a minute just to get the Open dialog box up to browse for a file. Eventually, the dialog boxes open, but during the time that it's trying to open, the program is unresponsive. It is happening with all of my CS6 programs. I have unistalled and reinstalled with no fix. The programs are updated.
I have two PC's side-by-side, running the same version of CS6. On one PC, I can see my Libraries from the "save as" and "open" dialogue boxes and on the other I have can't have have to dig down to find the folders I want to save to. I don't have any plug-ins installed, and I have not edited the registry.
I run a HP DV6 Laptop with Core I7 and Windows 7. While editing my photos my computer appeared to over heat (which is a recurring issue that I'm working to resolve) during mid-post production. Upon restarting my computer, and when I accessed the same photos, I got a very lengthy loading icon when I clicked on a photo under the "Develop" tab. This problem recurred and in attempt to resolve the problem I decided to delete the library and re-import the files. Upon re-import, I cannot view all the photos in the library grid view. I'm not sure if my files are now corrupt from the sudden crash or is it just a data issue with LR?
I've attached a screen shot of what the problem library looks like...
